Resume - E&I Supervisor with 28 years service in all divisions of the electrical industry

Misco Jobs

Resume #57073

CONTACT INFORMATION:
If you don"t see contact information, please log in first.

With over 25 years experience in the Civil, Power, Mining, Petrochemical Commercial and High-Tech Divisions of the electrical industry, complimented with a working knowledge of the National Electric Code to perform Journeyman level work in a craftsman like manner.

* Extensive experience in all stages of electrical and instrumentation construction and methods, As a Supervisor or an electrician. From ground grids and underground conduits to the above ground layout of conduits, cable raceways, fabrication and installation of Electrical systems, service equipment and instrumentation. Utilizing various voltage's from: 4-20 milliamp instrumentation to 220 Kv sub-stations and inner-connect facilities.

* Extensive supervisory experience in Design Build projects and Shutdown Outages comprising of on the spot, real time decision making and field engineering. Working with Electrical and Instrumentation Engineers, submitting appropriate as-built drawings and submittal reports and other verifiable documentation to keep the project flowing and on schedule.

* Supervisory experience in the Start-up and Commissioning of a project. Responsibilities include: Document control, Megger reports, Instrument calibration and loop check documentation, Pre task Safety and System analysis completion reports. Client turn-Over over reports. While always working with the Project manager, Client, Vendor and or Factory representative in the U.S. and abroad for the management and productivity of personnel and equipment, maintaining safety and quality a number one objective.

* Extensive experience in regards to safety, that all personnel take a safe and prominent role on a project. That all pre-task forms are filled out and reviewed by all crafts involved in work on a system, in order to pin point possible safety issues and hazards, possible equipment hazards and impacts to better protect personnel and equipment from injury and damage.

* Extensive experience as an Electrical Superintendent providing detailed daily progress reports to the Project Manager and Client. Having to interface with various other Craft Supervisors to provide accountability and acceptance for project dead lines and Completion Turn-Over Packages. Experience with tracking time and labor cost, Managing personnel, ordering tools, materials and equipment. Scheduling man power task to keep the project on time and on budget.

* Extensive experience in the supervisory of and the installation, termination, troubleshooting and maintenance of specialty A. C. voltage systems, both utility power and diesel generator supplied power comprising of Voltages from 11kv, 5kv, 2.3 kV power distribution centers to 480 volt Motor control centers. Variable frequency drives and D.C. voltage systems such as: Variable speed drives, uninterrupted power sources (battery and diesel Generated supply).

* Experience in Programmable Logic Control, DCS and SCADA Systems.

* Past experience in the calibration, testing and loop checking of Instrumentation and controls for a project.

* Experience in working with the United States Military, operating in Central Asia and in the Middle East. Working on multiple State Department Communication projects, Logcap and Afcap Force protection projects. Providing electrical services and support from 11kv thru 220 volt systems. Providing a better quality of life for our Armed Forces deployed in overseas operations.

* Experience in working with and directing Expats, Third Country Nationals and Local Nationals in the installation and repair of these electrical services.

* Electrical and Instrumentation Education is as follows:
4 year electrical and instrumentation Classroom and OJT apprenticeship.
40 hour OSHA 500 (HSE) classes.
High Voltage cable splicing classes.
Multiple Supervisory and management classes.
As it stands, I average 16 to 24 hours per year of Class room and Lab time to maintain all electrical licenses. Just to name a few and as stated in my cover letter, these classes very from Electrical safety classes, NEC code change classes, Electrical and Instrumentation design classes, Electrical calculation classes, Process flow and instrumentation classes. Over the years I have logged many hours of education to keep me current and marketable in today's electrical Industry and in a global market.

Recent Previous Projects;
* 2007- 3/2005.
Company: MCI/ Verizon.
Primary task as Senior Electrician was to install and maintain over 30 Cellular Sites comprising of 2 different government contracts through out the whole of Iraq and all of Baghdad. Secondary task was to build and provide MEP services for two man camps located in the Victory/Biap area.

* 4/2005-4/2004.
Company: RMS.
Primary task was to build and maintain 11Kv power infrastructure for Camp Cook Iraq. Work comprised of the installation of eight 1.2 Meg diesel 11 Kv generators Control and Sub-Station, Overhead transmission lines and 11Kv – 400 volt ring mains.
Secondary task was to provide electrical services Base wide comprising of voltages from 400 volt – ¼ milliamps.

* 4/2004-4/2002.
Company: Electrix.
Primary task as an Electrical Supervisor was to manage up to 40 Electricians for ongoing 2 million dollar capital projects for a major pulp and paper mill located in Camas Washington.

* 4/2002-4/2000.
Company: Kelly Electric.
Primary task as an Electrical Supervisor was to manage up to 80 Electricians for various projects including a major paper and pulp mill located in Lake Oswego Oregon and a major Aluminum Smelter located in Dalles Oregon.

* 4/2000- 6/1979. Multiple projects as an Electrical Supervisor and as an Electrician serving the Power, Civil, Petrochemical, High- Tech and Commercial Industries.

«« previous resume

next resume »»

Search Results (Resumes 1 to 50 of 1013)

Go to Search Parameters...

Brief Description

Free! Drills Supervisor

Free! I have 25 years of working with problem plants and people. Increasing production while at the same time increasing safety records. Extensive mechanical knowledge, both hands on and in a supervisory role.

Free! A certified professional coal geologist with over 15 years of domestic and international experience in exploration and mine production. Also have 10 years of management experience in the manufacturing sector

Free! More than nine years of hard core experience in Early and Advanced Stage Exploration Environment for Diamond (De Beers) and Base Metal (Anglo American).

Free! 20+ years of international projects experience in the study, process design, engineering, procurement & project management. Having led multifunctional teams for EPCM for hydrometallurgical( Leaching, SX-EW), benificaition & pyro( Smelter & Electro refining) for copper, Cobalt, zinc and lead metals.

Free! Experienced hard working Geologist, Underground and open pit experience, Resource development modelling and drill program design and implementation, Very experienced mapping and strong structural background.

Free! E&I Supervisor with 28 years service in all divisions of the electrical industry

Free! Master Electrician with 26 yrs experience in the construction field

HANDS ON METALLURGIST

Coal Mining Contractors located in Virginia and Kentucky

Senior Manager - Domestic & International Mining Experience - Strategic Planning / Mine Planning / Technical Evaluation / Permitting / EPCM / Project Development / Mine Operations / Project Evaluation

PLAN, ORGANIZE,IMPROVE PERFORMACE,REDUCE WASTE,SETTING AND ATTAINING TARGETS,MANAGED $65M BUDGET, LEADING,TRAINING,DEVELOPING RAPPORT IN MULTI LEVEL INDUSTRIALIZED GROUPS,MANAGED NUMEROUS PROJECTS IN EXCESS OF $20M

Process Engineer/Metallurgist/Consultant - Mineral Processing, Hydrometallurgy, R&D - MS, PE, 20-years operating experience; precious metals expert.

Management, supervisor, mechancial,

Base metal and Gold extractive metallurgist, General Mill foreman. Non metallic project manager. Training and multilingual communication abilities.

Head, Production Planning and Control

30 years experience in Metallurgical Investigations and Concentrator Operations processing base metals.

I am experienced Metallurgical Engineer with unique experience in a broad range of metals/gasars/alloys/composites processing, including alloying, casting, melting, heat treatments, microstructure design. Able to work in quality control, research and development facilities.

Operations of Zinc Lead Cadmium Sulphuric Acid Phosphoric Acid Fertiliser

Application for the post of Executive Director (Operation ) / G.M. ( Operation )

Aggregate Plant Manager, 20 years experience, surface & underground

Underground mining supervisor with 25 years+ experience in the mining industry. Also, I have Landed Immigrant Status with no restrictions in the US

A registered Male nurse with 13 years experience in the field of nursing, a year in a mining industry, 7 years in a hospital and almost 6 years in the college of nursing. Had conferences, trainings and seminars on international, national and local levels about HIV, AIDS, Emergency Nrsng and Safety

An experienced daimond core drilling engineer seeks employment.24 years wide range experience in daimond, rotary and DTH drilling methods.Operation,maintanance and fishing,trouble shooting.Had overseas experience in Tanzania during 1995.

Directed & controlled production & development at several underground base metal mines. Proficient in the operation of numerous mine equipment machines. Over 30 years experience in the mining industry.

Mining Engineer from with 24 years experience in underground as well as opencast mines. I have exposure in Lead-Zinc, Chromate Mines, Bauxite Mines and Limestone Mines. Presently, working as functional head of Limestone Mines captive to Cement plant.

I have basic education, knowledge and experience as for Project Metallurgist

Experienced (+29 years) professional geologist with field and laboratory background and prospecting/exploration for gold, PGE and base metals.

Motivated team leader, hands on experience in plant management, maintenance and ore processing. Good computer skills. A "lead by example" type of team player. Motivated by achieving deadlines in a timely and zero accident frequency manner.

I am having 5 years experince as exploration geologist. I am expert in geochemical sampling, Mapping in different scale's, operating geophysical instruments and operating camps.

Experienced Quarry Manager Available

Maintenance Manager - Mining

Fire Assaying Laboratory Analyst

Supervising the work at derocking & Quarry area.

To offer quality management services related to mining and quarrying covering the aspects of mine planning and engineering, development and operations, including among others activities such as formulation of short and long term plans and implementation; drilling and blasting design and optimization

Proper understanding of geololgical systems and interpretations through mapping and logging.Very familiar with grade control systems and procedures for optimal pit production work. Mentoring of subordinates in proper sampling and grade control procedures.

DRILLING SUPERINTENDENT

Skilled heavy equipment operator having vast experiece of 19 years with qualification of diplomo Knowledge of operating computers

Over 10 years of work experience in mining industry, both underground and open pit practical experience. Have good ability to manage team of workers, proven analytical skills,

Field Ops. Oil & Gas. Enviroment assessment & Remediation. Ground Water Specialist. Supervisor Explosives/HSE/RA material. Various Geologic Softwares

Business-oriented geologist experienced in exploration, development, and operation of mineral projects. International experience including extended stays at remote sites. Experienced in due dilligence investigations for mergers and acquisitions, mineral rights valuations, mine planning.

OBJECTIVE To secure a challenging and rewarding position in which I can fully utilize my experience in drilling and mining engineering.

• Experience in multiple project phases - scoping, design, estimating, procurement, materials management, construction, operation, shut-down, cleanup and closure.

WELDER / SOUDEUR

Computer and software, Language and Cement raw material, mixing raw materials, drilling, quarrying, mining.

Seasoned, but 45 year young construction professional seeks new opportunities. More than 25 years of experience in construction/mining/quarry operations. First sixteen years was hands on field experience before returning to college to attain a Masters in Accounting.

Twenty-five years of mining experience including operations supervision, mine planning, drilling and blasting, operations support engineering, feasibility studies, property evaluation, and environmental compliance.

15-year mining career, 7-years of which was in South America. Bilingual Proven track record in meeting or exceeding budgeted production numbers. B.Sc. Metallurgical Engineering - Colorado School of Mines. MBA - Idaho State University

I have 15 years experience in the hardr ock industry as a Miner ,Shift Foreman and Hoistman. I also have been involved in mine rescue for 14 years.

I am a geologist with 12 years experience. 5 years in exploration and 7 years in mining.

[ 1 ] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out