Resume - Repair and Maintenance, Product Quality Analyst, electrical fault analysis, acce...

Misco Jobs

Resume #78837

CONTACT INFORMATION:
View contact information...

Career Objective
To become a part of a growing and respectable company that has stability and advancement opportunities where I can expand my knowledge and skill sets.
Education
Associates of Applied Science GPA=3.85 out of 4.0 graduated from I.T.T. Technical Institute
Major in Electrical Engineering
CCNA Networking Associate Certification

Experience
2007 – current Texas Instruments Stafford, Texas
Repair and Maintenance Technician Prober and Tester support

* Isolate, troubleshoot and repair multiple tester platforms, which include Teradyne, Polaris, LTX Fusion, and various other customer test platforms.
* Run diagnostics and electrical fault isolation
* Board replacement
* Power Supply adjustment and replacements
* Support the test floor and maintain tool utilization at 98%.
* Interface with customers and engineers to provide increased quality and dependability on any all tester platforms.
* Maintain and order spare parts if needed.
* Troubleshoot PCB's to the component level and repair as needed to maintain tester utilization and reduce downtime.
* Access and usage of Unix and Linux operating systems.
* Extensive ISO 9000 training

Experience
2003 – 2007 Texas Instruments Stafford, Texas
Product Quality Analyst AEC Automotive Division

* Analyze Micro controllers. Through electrical fault isolation techniques.
* Support customer returns and improve quality through defect identification, defect reduction, defect electrical isolation, test case improvements and implementation. Drive customer returns to closure and identify root cause.
* Operation of Automated Testing Equipment: Platforms: Teradyne, Polaris, Fusion, and various other customer test platforms.
* Provide corrective action to reduce defects to improve quality and reliability.
* Provide formal status and final reports in the 8D format.
* Extensive ISO 9000 training

Experience
2000 – 2003 Texas Instruments Richardson, Texas

Plasma Test Laser Technician
* Operate Laser, VCT, VLCT and LTX Fusion series testers
* Operate under engineering conditions "Load specialty Job files etc"
* Interface with Engineering on Dispositions and minor issues with product flow
* Monitor and troubleshoot tester setups to maximize yield and minimize probe / re-probe cycle time and scrap
* Perform data analysis in performing lot disposition after processing
* Work closely with PDE and assist as I can in bin summary analysis, material scrap/dispositions and program anomalies
Experience
1999 – 2000 Texas Instruments Richardson, Texas
Wafer Fabrication Manufacture Specialist, (Photolytic)
* Work in a clean room environment
* Wafer handling protocols
* Operate photolithical equipment in production of silicon wafers utilizing precision optical equipment (electron microscopes, steppers using unix xterm interfaces and alignment machines
* Follow written and verbal procedures
* Interact with customers and suppliers within a team environment
* Troubleshoot exposure problems and make adjustments accordingly
* Identify hold lot issues; implement corrective action and direct rework as necessary

1987-1999 Texas Instruments/Raytheon McKinney, Texas

Electronic Engineer Technician AT/ET (Acceptance Test,
Environmental Test) Job grade 74
* Perform Qualification testing on deliverable/prototype products
* Provide formal documentation on testing results and events performed
* Trouble shoot malfunctioning systems and work closely with Engineering to correct issues, utilizing voltmeters, oscilloscopes and analytical software relevant to the particular system under test
* Interface with customers/suppliers within the organization
* Control work flow to meet customer demands and on time delivery
* Work with and write formal operating procedures and written operating instructions as needed in operation of systems to meet Military standards and customers needs
* Maintain and trouble shoot equipment used in the lab (Test sets, Chamber controllers, vibration controllers, circle chart recorders, meters, PC's, operating systems such as Windows NT and Unix/Solaris.
* Gather field data on systems, instrument them with accelerometers, operate them under field conditions while recording on a DAT machine, take the data and import it into a signal generator, and alter the signal as needed per customer requirements (increase or decrease DB/RMS levels) to be input through Electro Dynamic Shakers controlled by Ultra Spark workstations running on Solaris Unix and Spectral Dynamics Shaker controller software
* At times provide LAN connectivity so that the customer can interact with their units under test from home or from their workstations. Some test are very long durations, sometimes as long as 1 year (Reliability Growth and accelerated life Tests)
* Perform sound tests within a soundproof environment, recording DB levels under operational and non-operational conditions to meet customer requirements
* Provide testing recommendations to customers to meet Military standards

Special Skills
* Extensive electrical test data analysis. Able to interpret electrical functional data for electrical fault isolation.
* Power Supply functionality, adjustment, and replacement
* Good understanding of electrical circuitry and their functionality.
* Good understanding of semiconductors, their properties and fabrication methods and techniques.
* Certification of completion of Advanced Vibration Equipment Operation Administered by Environmental Test Laboratory of Texas Instruments
* Use testing and monitoring equipment as in voltmeters and oscilloscopes, signal generators (Spectral Dynamics software)
* Good written and communication skills
* Work well in a teaming environment
* Work with little or no supervision
* Control workflow to meet customer requirements
* Read drawings and schematics, follow and write formal procedures
* TQC certification (Total Quality Control)
* Basic Unix operating system usage
* Signal generation and wave form manipulation using Software made by Spectral Dynamics
* Troubleshooting skills, some component level and card to system level
* Operation of Teradyne, VCT, VLCT, LTX Fusion Probe testers
* SMS functionality
* Microsoft Word, Excel, some Access
* Operating Systems—Winnt 4.0 and up, WinME, Win2000, Win2000 server, Solaris, Linux, Unix

Honors
* Member of the Honor Society at I.T.T. Technical Institute
* Highest Honors awards

References
* Furnished upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 501 to 550 of 1115)

Go to Search Parameters...

Brief Description

Results-Driven Leader/Senior Executive, BS/MS/PhD work ChE, MBA, PE, 25+ years experience

Natural Gas Resume

I have 18 years experience in the oil field on drill rigs also have 10 years experience as caterpillar mechanic I have computer, construction,electrical,plumbing skills and I am very safety minded

In response to this, please consider my PROJECT BASED resume for Instrumentation positions pertaining to your need.

Radio and Communications

Recognized expert in all facets of mine production, training and operating. Specialised in production ( long-hole) drilling. Very experienced on Tamrock drills, including Data Solo Models. Highly regarded as an Instructor.

Experienced Design Engineer

Contracts & Global Procurement Manager, Change Agent, Systems Initiation, Strategic Sourcing, Seasoned Negotiator, Proven Organizational & Team Leadership, Collaborative Mgmt. Style, Broad knowledge of OEMs & Suppliers, Contractor Oversight, Systems & Procedures, Middle East Mega-Project Experience.

Operator - dozer,loader, excavator, shovel, backhoe, drill I can operate large or small equipment I have machinest experience I have been general manager of surface mine in charge of all operations currently operate my own equipment in excavating business

An experienced security professional with 24 years of strong corporate security and law enforcement qualifications who has demonstrated a high level of success in a variety of significant and highly critical assignments in a fast paced environment. Also has an impressive track record of hands-on exp

I am a mining engineer and also has a masters degree in urban and regional planning.

QUALFIED FITTER, EXPERIENCE ON DOSERS, CATERPILLARS, HITACHI LAODERS, REPARI AND INSTALL HOWDEN, EAGEL, SAMURI, MONO AND SAMSON WATER PUMPS, REPAIRED AND MAINTAINED LOCOMOTIVES AT TRANSNET.

Buyer/Planner Skilled in Inventory Management, Cost Reduction, Sourcing and Negotiation

Extensive production, operations and management background searching for a position in operations /production management at a staff or middle management level. Solid background in operations, maintenance, process optimization, SPC, supervision, training, safety and team development.

Repair and Maintenance, Product Quality Analyst, electrical fault analysis, acceptance testing, interpret drawings and schematics, advanced vibration, reliability growth testing, precise measuring equipment, tester platforms (Teradyne, Polaris, Fusion), power supply adjustment and replacement

Software Developer .NET, Java SQL

Instrumentation I&C DCS Technician

A skilled surveyor with 10 years of experience

Contracts Manager

Process Plant Manager, Metallurgical Management, Production Manager, Chief Sorter and Certified Flow-Sort X-Ray Machine operator.

Project Controls / Project Services / Business Management

Dynamic professional Process Engineer with fours years of experience in production, planning and control, process optimisation and man management in base metals refinery. Proven technical capabilities in hydrometallurgy, electrowinning, pyrometallurgy, process control and management of new process

Experienced, safe & confident driver.

A results-oriented Analyst combining hands on management consulting, project finance, market analysis and mining operations experience, I provide actionable advice for the key business decisions that enhance competitive positioning.

Procurement, Materials and Logistics Manager (SCM): 20 years international experience in gas & oil and energy projects.

Looking for management position in mineral (gold and precious metals) exploration and environmental engineering consulting.

BE,MBA graduage having 13+ years experience in Sales & Marketing of Engineering, Flow Control & Instrumentation Process Products

A proactive leader with extensive reliability centered maintenance management and hands-on experience in the repair, overhaul and troubleshooting of mobile equipment, initiate change and reengineering of quality improvement processes while maintaining a positive, safe and productive environment.

Over 20 Years experience in International and Domestic assignments in the Electrical and Instrumentation Fields. Assignments internation-ally have been in Project/Construction management, Supervision, QA/QC and commissioning. Project experience is diverse and in-cludes mining and extraction/ recov

Supervision, planning, scheduling, coordination, maintenance (prevantive & breakdown), budgeting/forecasting, optimum inventory management, resource development & deployment, utilities etc.

Geologist

Seeking challenging plant manager position. Degrees in Business Administration, Mining Engineering, and Metallurgical Engineering. Experience in mining, mill operations, and maintenance. Have worked in both union and non-union environments.

Multi lingual professional with MBA in Supply Chain Logistics. A proven effective communicator and negotiator with extensive experience in field operations supporting military, humanitarian and commercial operations.

A dynamic professional with over 18 years of rich experience in Procurement, Vendor Development and Inventory Control.

Project Controls Cost Engineer / Analyst (EVMS, Change Management, Cost Forecasting Planning and Budgeting)

29 years experience in all phases of building trades construction. I have specialized in residential plumbing, new construction, repair, renovation and commercial pipefitting.

Very experienced explosives engineer, with account and man management experience. Former regional manager of the UK,s foremost explosives supplier. Experienced in mining and construction projects.

To obtain a challenging position that utilizes proven experience and skills.

Underground Miner: Miner, quality control inspector, shifter, lead man, hoistman. Shaft & drift, jackleg & jumbo, track & rubber tire.

To your team I bring business, economic and industrial development knowhow. To complexity I provide logical reasoning and cultural competency. I apply monitoring and evaluation research methods and tools. My thought-work enables decision-making. It maximizes impacts, outcomes, and change.

Drilling professional for 20+ years; extensive international well construction supervisory experience; directional, drilling engineering and management experience; drilling project manager of China’s first horizontal multilateral CBM well.

A highly experienced Sr. Chemist with postgraduate qualification in Analytical Chemistry from AMU Aligarh University, India. Possessing 14 years of experience in operation and management of environmental protection, power and desalination plant and R&D laboratories. Expert in analytical technique

As a Mining Engineer, I have technical knowledge and managament skills. Computer skills (MS Word, Excel, Power Point). Drilling, Blasting. Tunneling. Development, Preparation and Production.

Nace level 3 coating inspector, CINI certified insulation inspector & Chartek certified fireproofing inspector.

Well qualified Tunnelling professional with broad experience in several technical key areas like microtunneling,dewatering,piling and CCTV sewerage inspection includes management,administration and team building skills in Project Management, troubleshooting, execution in Infrastructure industry.

laboratory, mechanical, electrical, computer, supervisory and leadership skils

Mining engineer with experience in strip mining and underground metals mines. Graduating with Master in 2007. Techinical interests in cut and fill mining.

Over 15 years of engineering and project management experience in commercial and industrial construction. Demonstrated ability to manage a diverse array of projects, including hospitals, stadiums, FAA airport projects, casinos, biopharmaceutical, and semiconductor facilities.

Well experienced in Document Controller & Secretarial jobs in Construction and Petrochemical companies in different Gulf countries. Knowledge of operating M.S. Office and Acconex. Currently working as Document Controller in Dubai Metro Rail Project, UAE since 1-1/2 years.

As Geosciences Engineer, 13 years of experience. Exploration and Production mines

1 2 3 4 5 6 7 8 9 10 [ 11 ] 12 13 14 15 16 17 18 19 20 21 22 23

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out