Resume - Dynamic professional Process Engineer with fours years of experience in producti...

Misco Jobs

Resume #83871

CONTACT INFORMATION:
View contact information...

CAREER OBJECTIVE
Looking for a challenging and exciting process/chemical engineering opportunity on a truly global scale in a reputed company having world class culture and exposure to emerging technologies.

WORK EXPERIENCE

Rio Tinto Zimbabwe – Empress Nickel Refinery
Process Metallurgist (Sept 2006 – Jan 2008)

I was promoted from my position as a Junior Metallurgist to a Process Metallurgist responsible for the refinery section in September 2006. My duties were; planning, coordinating and controlling metallurgical process activities at the nickel and copper refinery including:
(i) Daily, monthly, quarterly and yearly metallurgical accounting on the hydrometallurgical and pyro-metallurgical plant,
(ii) Carryout projects and test-works to continually improve plant operations,
(iii) Develop of PFD's and PID's, sizing of pipelines, valves and equipment for new and renovated section of the plant,
(iv) Preparing plant models for plant control purposes and assisting in the development of process optimization techniques,
(v) Trouble shooting on operational issues and coming up with detailed action plans, executing and implementing production forecasts and targets, operational and metallurgical standards,
(vi) Ensuring that set production targets and process efficiencies are met,
(vii) Ensuring compliance with all safety, health and environmental legislations and standards.
Accomplishments
(i) Consistently achieved leaching efficiencies above 85% as leach metallurgist.
(ii) Was involved in successful projects including; upgrade of smelter gas handling system, use of plate heat exchangers at ENR, cobalt precipitation tanks replacement, improving PGM concentrates grade and optimisation of oxygen usage in the leach plant.
(iii) Leading a team that championed ISO 9001 certification at Empress Nickel Refinery.
(iv) Optimisation of the milling circuit with emphasis on milling throughput and power optimisation

Junior Metallurgist (July 2005 – Aug 2006)

During my tenure as a junior metallurgist I managed the metallurgical functions of the milling section, leach, cobalt plant, PGM plant, smelter section and the tankhouse. The functions of this position were;
(i) Carrying out metallurgical testworks in an effort to improve leach efficiencies and lower reagent consumption.
(ii) Process optimisation and plant troubleshooting
(iii) Identification of Process Improvements and execution of the improvements on plant scale
(iv) Develop conceptual Process Flow Diagrams for treatment of plant residues, tankhouse sludge and smelter skulls based on pilot scale testwork.
(v) Conducting sampling campaigns on the plant to evaluate performance and for process control purposes in accordance with detailed feasibility studies
Accomplishments
(i) Successfully developed conceptual Process Flow Diagrams for treatment of plant residues, tankhouse sludge and smelter skulls based on pilot scale testwork
(ii) Did testworks on possible filtration bags for the tankhouse and successfully proposed a better and effective filtration bag which improved nickel plating by 10%.
Learner Process Metallurgist (Aug 2003 – Aug 2004)
After learning all the refinery plant sections in detail (leaching plant, milling section, cobalt removal plant, PGM leach plant, tankhouse, smelter, boilers and the water treatment plant), I resumed the following duties;
(i) Carryout projects and test works to continually improve plant operations
(ii) Carry out metallurgical accounting for individual plant unit processes
(iii) Design and implement lab and pilot scale testwork to continually improve plant operations
(iv) Evaluate recommended filtration products for improved separation efficiency.
Accomplishments
(i) Achieved a distinction (class 1) for my industrial attachment year as a result of my contributions to the operations at the nickel and copper refinery.
(ii) Due to the good performance during my attachment, I was offered an opportunity to pursue my further graduate training at Empress Nickel Refinery soon after finishing my studies

EDUCATION
1. MSc in Chemical Engineering
(Crystallisation and Precipitation Unit, University of Cape Town - Feb 2008 to Date)
(i) Undertook a full time research in a project entitled Continous Precipitation of Selenium and Tellurium using the Replication Model System
(ii) Made an oral presentation at the South Aafrican Institute of Mining and Metallurgy (SAIMM) in August 2008 on the topic entitled Precipitation of selenium from acidic copper sulphate solutions using sodium sulphate.
(iii) Published an abstract entitled Precipitation of selenium from acidic copper sulphate solutions using sodium sulphate in the Mineral Processing Journal 2008.
(iv) Also working as a Teaching Assistant (Tutor) in the Chemical Engineering Department and Mathematics Department at the University of Cape Town.
2. Bachelor of Engineering Honours Degree in Chemical Engineering
Offered by the National University of Science and Technology, Zimbabwe (August 2000 – July 2005)
(i) Design Project: Design of a plant to produce 156 000 tones of chlorine per annum through the electrolysis of brine
(ii) Attained class 2.1
3. General Certificate of Education Advanced Level (A' Level)
Offered by University of Cambridge Local Examination Syndicate in Collaboration with ZIMSEC (January 1998 – November 1999)
(i) Passes in Mathmatics (A), Physics (B) and Chemistry (C)
4. General Certificate of Education at Ordinary Level (O'level)
Offered by University of Cambridge Local Examination Syndicate (January 1994 – November 1997

CONTINUOUS PROFESSIONAL DEVELOPMENT TRAINING

1. OHSAS 18001 and ISO 41001 Safety, Health and Environment Management Systems Development certificate.
-offered by Nebuer Management Systems (Pvt) Ltd in November 2005
2. ISO 9001 Quality Management System Development and implementation
- offered by PIMs Management by Standards (Pvt) Ltd in August 2006
3. ISO 9001 Quality Management System Internal Auditing
- offered by Standard Associations of Zimbabwe in August 2007
4. Principles and Practice of Supervision
- offered by Zimbabwe Institute of Management in December 2005

TEAM LEADERSHIP / TEAM MEMBERSHIP

1. Leading a team that championed ISO 9001 certification at Empress Nickel Refinery.
2. Member of a team that successfully made ENR achieve both ISO 14001 and OHSAS certification.
3. Ambassador/Mentor for Inkanyezi Project at University of Cape Town

COMMUNITY INVOLVEMENT / VOLUNTEER WORK

Ambassador/Mentor for Inkanyezi Project. The project aims to help mentor scholars from disadvantaged background to make informed decisions with regards to their careers.
NON-ACADEMIC ACHIEVEMENT
Best chess player at high school regional level

PROFESSIONAL MEMBERSHIP

Member of the South African Institute of Mining and Metallurgy (SAIMM)

PERSONAL ATTRIBUTES

1. Very keen to learn new processes/technologies
2. Well versed with computer packages
3. Can work in any process environment
4. Can speak in English, Shona and Ndebele

INTERESTS OUTSIDE WORK

1. Playing/watching soccer, Playing chess, Watching cricket
2. Travelling
3. Reading science magazines

REFEREES
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 501 to 550 of 1116)

Go to Search Parameters...

Brief Description

Miner

Results-Driven Leader/Senior Executive, BS/MS/PhD work ChE, MBA, PE, 25+ years experience

Natural Gas Resume

I have 18 years experience in the oil field on drill rigs also have 10 years experience as caterpillar mechanic I have computer, construction,electrical,plumbing skills and I am very safety minded

In response to this, please consider my PROJECT BASED resume for Instrumentation positions pertaining to your need.

Radio and Communications

Recognized expert in all facets of mine production, training and operating. Specialised in production ( long-hole) drilling. Very experienced on Tamrock drills, including Data Solo Models. Highly regarded as an Instructor.

Experienced Design Engineer

Contracts & Global Procurement Manager, Change Agent, Systems Initiation, Strategic Sourcing, Seasoned Negotiator, Proven Organizational & Team Leadership, Collaborative Mgmt. Style, Broad knowledge of OEMs & Suppliers, Contractor Oversight, Systems & Procedures, Middle East Mega-Project Experience.

Operator - dozer,loader, excavator, shovel, backhoe, drill I can operate large or small equipment I have machinest experience I have been general manager of surface mine in charge of all operations currently operate my own equipment in excavating business

An experienced security professional with 24 years of strong corporate security and law enforcement qualifications who has demonstrated a high level of success in a variety of significant and highly critical assignments in a fast paced environment. Also has an impressive track record of hands-on exp

I am a mining engineer and also has a masters degree in urban and regional planning.

QUALFIED FITTER, EXPERIENCE ON DOSERS, CATERPILLARS, HITACHI LAODERS, REPARI AND INSTALL HOWDEN, EAGEL, SAMURI, MONO AND SAMSON WATER PUMPS, REPAIRED AND MAINTAINED LOCOMOTIVES AT TRANSNET.

Buyer/Planner Skilled in Inventory Management, Cost Reduction, Sourcing and Negotiation

Extensive production, operations and management background searching for a position in operations /production management at a staff or middle management level. Solid background in operations, maintenance, process optimization, SPC, supervision, training, safety and team development.

Repair and Maintenance, Product Quality Analyst, electrical fault analysis, acceptance testing, interpret drawings and schematics, advanced vibration, reliability growth testing, precise measuring equipment, tester platforms (Teradyne, Polaris, Fusion), power supply adjustment and replacement

Software Developer .NET, Java SQL

Instrumentation I&C DCS Technician

A skilled surveyor with 10 years of experience

Contracts Manager

Process Plant Manager, Metallurgical Management, Production Manager, Chief Sorter and Certified Flow-Sort X-Ray Machine operator.

Project Controls / Project Services / Business Management

Dynamic professional Process Engineer with fours years of experience in production, planning and control, process optimisation and man management in base metals refinery. Proven technical capabilities in hydrometallurgy, electrowinning, pyrometallurgy, process control and management of new process

Experienced, safe & confident driver.

A results-oriented Analyst combining hands on management consulting, project finance, market analysis and mining operations experience, I provide actionable advice for the key business decisions that enhance competitive positioning.

Procurement, Materials and Logistics Manager (SCM): 20 years international experience in gas & oil and energy projects.

Looking for management position in mineral (gold and precious metals) exploration and environmental engineering consulting.

BE,MBA graduage having 13+ years experience in Sales & Marketing of Engineering, Flow Control & Instrumentation Process Products

A proactive leader with extensive reliability centered maintenance management and hands-on experience in the repair, overhaul and troubleshooting of mobile equipment, initiate change and reengineering of quality improvement processes while maintaining a positive, safe and productive environment.

Over 20 Years experience in International and Domestic assignments in the Electrical and Instrumentation Fields. Assignments internation-ally have been in Project/Construction management, Supervision, QA/QC and commissioning. Project experience is diverse and in-cludes mining and extraction/ recov

Supervision, planning, scheduling, coordination, maintenance (prevantive & breakdown), budgeting/forecasting, optimum inventory management, resource development & deployment, utilities etc.

Geologist

Seeking challenging plant manager position. Degrees in Business Administration, Mining Engineering, and Metallurgical Engineering. Experience in mining, mill operations, and maintenance. Have worked in both union and non-union environments.

Multi lingual professional with MBA in Supply Chain Logistics. A proven effective communicator and negotiator with extensive experience in field operations supporting military, humanitarian and commercial operations.

A dynamic professional with over 18 years of rich experience in Procurement, Vendor Development and Inventory Control.

Project Controls Cost Engineer / Analyst (EVMS, Change Management, Cost Forecasting Planning and Budgeting)

29 years experience in all phases of building trades construction. I have specialized in residential plumbing, new construction, repair, renovation and commercial pipefitting.

Very experienced explosives engineer, with account and man management experience. Former regional manager of the UK,s foremost explosives supplier. Experienced in mining and construction projects.

To obtain a challenging position that utilizes proven experience and skills.

Underground Miner: Miner, quality control inspector, shifter, lead man, hoistman. Shaft & drift, jackleg & jumbo, track & rubber tire.

To your team I bring business, economic and industrial development knowhow. To complexity I provide logical reasoning and cultural competency. I apply monitoring and evaluation research methods and tools. My thought-work enables decision-making. It maximizes impacts, outcomes, and change.

Drilling professional for 20+ years; extensive international well construction supervisory experience; directional, drilling engineering and management experience; drilling project manager of China’s first horizontal multilateral CBM well.

A highly experienced Sr. Chemist with postgraduate qualification in Analytical Chemistry from AMU Aligarh University, India. Possessing 14 years of experience in operation and management of environmental protection, power and desalination plant and R&D laboratories. Expert in analytical technique

As a Mining Engineer, I have technical knowledge and managament skills. Computer skills (MS Word, Excel, Power Point). Drilling, Blasting. Tunneling. Development, Preparation and Production.

Nace level 3 coating inspector, CINI certified insulation inspector & Chartek certified fireproofing inspector.

Well qualified Tunnelling professional with broad experience in several technical key areas like microtunneling,dewatering,piling and CCTV sewerage inspection includes management,administration and team building skills in Project Management, troubleshooting, execution in Infrastructure industry.

laboratory, mechanical, electrical, computer, supervisory and leadership skils

Mining engineer with experience in strip mining and underground metals mines. Graduating with Master in 2007. Techinical interests in cut and fill mining.

Over 15 years of engineering and project management experience in commercial and industrial construction. Demonstrated ability to manage a diverse array of projects, including hospitals, stadiums, FAA airport projects, casinos, biopharmaceutical, and semiconductor facilities.

Well experienced in Document Controller & Secretarial jobs in Construction and Petrochemical companies in different Gulf countries. Knowledge of operating M.S. Office and Acconex. Currently working as Document Controller in Dubai Metro Rail Project, UAE since 1-1/2 years.

1 2 3 4 5 6 7 8 9 10 [ 11 ] 12 13 14 15 16 17 18 19 20 21 22 23

Seach Parameters


Change search parameters...
CATEGORIES: Operations; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out