Misco Jobs	|  Go to Job Seeker's Center »»   |
	«« previous resume Resume #2798 next resume »» CONTACT INFORMATION: View contact information... 8/2000 to Present Supervisor: John Simonson Position: Driller Duties: Operate IR-DMM Blast Hole Drill, Bucyrus Erie 49R111 Blast Hole Drill, P&H 120 Blast Hold Drill. Operate all support equipment for drills, 1500 gal water truck, Blast Hole Steamer and Powder Trucks. 11/97 to 8/2000 Own business. Bricklayer – Supervise several employees in the Masonry business. Contract for major construction companies. 2/95 to 11/97 Sante Fe Pacific Gold – Lone Tree Mine Valmy, Nevada 89438 (702) 635-9000 Supervisor: Robin Irwin Position: Driller Duties: Drill and sample blast holes, keep accurate records of bit wear, operate and maintain Ingersol Rand drills up to and including DML's. Transport Drill on Wabco flatbed, work on powder crew as needed, operated 785 (150 ton) CAT trucks as needed and operated 988 CAT loader as needed. Dresser 210 haul truck Hitachi 261 Backhoe, Cat 16G Grader. Mine Rescue/First Responder 5/94 to 1/95 Own business. Bricklayer – Supervised several employees in the Masonry business. Contracted for major construction companies. 4/92 to 5/94 Santa Fe Pacific Gold – Lone Tree Mine Valmy, Nevada 89438 (702) 635-9000 Supervisor: Robin Irwin Position: Driller Duties: Same as above 12/89 to 4/92 Own business. Bricklayer – Supervised several employees in the Masonry business. Contracted for major construction companies. 9/88 to 12/89 Barrick Goldstrike Mine Supervisor: Hank Radar Position: Truck Driver Duties: Truck Driver. Haul Trucks up to and including Dresser 190 Ton Electric. 5/87 to 9/88 Barrick Mercur Gold Mine Supervisor: Mike Girrard Position: Truck Driver/Operator Duties: Operate IR-DM25 Blast Hole Drill, Wabco 65 Ton Water Truck, Wabco 85 Ton Haul Truck, International 570 Loader. 3/77 to 8/86 Blackmaun Fences, Inc. P.O. Box 22 Duties: Order materials, oversee other Masons work, maintain Quality Control, residential construction, install fireplaces, veneers, Jacuzzis, etc. 12/76 to 3/77 M.L. Hanson Construction Co. Salt Lake City, Utah Supervisor: Robert Barrett Position: Carpenter Duties: Layout, framing, finish work as per job, read and followed blue prints building churches. 9/70 – 12/76 United States Marine Corps Duties: Pneumatic/Hydraulic Mechanic – CH46 Seaknight Helicopter, Boeing Vertol, Secondary MOS as Electrician Education: G.E.D. USMC Advanced Training: 3/20/78 to 3/20/81 – Bricklayer and Allied Craftsman Apprenticeship School L.A. CA 1974 – MCI Washington D.C./Monitor and Decontamination Team 1972 – MCAS New River Jacksonville, N.C. – CH46 Hydraulic Systems, CH46 Interphase, CH46 Airframes 1972 – NATTC Nas – Memphis, Tenn – Aviation Structure Mechanic, MATSS-901 MATSG 90-Mechanical Fundamentals 1971 – GED – MCES, MCS, GLNC Basic Electrician References on Request View contact information... «« previous resume next resume »» Search Results (Resumes 101 to 150 of 938) Go to Search Parameters... Brief Description Heavy Duty Mechanic Welder needs work Maintain unit and running reair Surface Mining Operator and Foreman Industrial Maintenance Electrician 442A, Industrial Electrician, Instrumentation and Control Technician 447A, Instrument Mechanic, Electronic Technologist, Electrical Maintenance Technician Im presently building 2 land rigs for Arabian Drilling company, and have been employed by ADC for 7 years,as a senior chief mechanic. I am trying to get involved in a more technically advanced environment. I would be prepared to come and do a trail period on my days off. Extensive offshore experience within maintenance departments of large scale open pit mining operations. I have 20+ years experience as a welder. I am certified in several welding procedures. I have done all-around general welding to custom fabrication. I am willing to relocate and/or travel. I am willing to relocate for my employer, I am a mature energetic, safety oriented employee. I am currently looking for a job in mining or heavy construction that will utilize my skills and productivity as a heavy equipment operator. I have 21 years in Aust Army as Maint Planner/Supervisor with Diploma Engineering (Maint). Experienced trainer in Mincom Logistics computer systems. Willing to relocate nationally or internationally for the right position. Associate Degree in Mechanical Engineering Draughting, 10 years Experience in various Mechanical and Plant Layout applications, using Inventor, Autocad, Pro Engineer, MSC Patran. Heavy Engineering Environment, International Earth Moving Machinery Manufacturing Company in South Africa. Over 23 yrs of heavy earth field mechanic. AAS in Heavy equipment and diesel Technology. Lack final semester for BA in Training Industry & Business. CAT and Kamatsu trained. Instrumentation technician with nine years experience in maintenence,repair,calibrating and installing of electrical,electronic and pnuematic equipment. 10 years Heavy/Deisel Equipment Mechanic, Mining Experience, Shop Supervisor, Drill Maintenance Multifaceted, proactive, and highly motivated professional seeks position within the mining, construction, transportation, or chemical process industry combining solid skills and diverse experience Heavy Duty Mechanic Certificate -IP:K-06-14390 Inter-provincial Red Seal Certificate -23 years experience in the mining field -16 years experience as Heavy Duty Mechanic (underground and open pit) Summary Experienced Maintenance Mechanic/Welder with twenty-five years in the maintenance field. 25 years of experience in the mining industry - heavy equipment operator and driller. diamond driller Electrician 10yrs exp. I believe my experience and solid record of achievement makes me an ideal candidate for the current open position in your company. 30 years of field experience; 14 years in mid to upper level management in the areas of: mining, oil field, construction and power generation. Proven ability to complete large scale equipment assemblies at remote locations. This resume contains my experiences in truck driving and heavy equipment operating. Have substantial supervisory experience in the maintenance of Heavy equipment, work well with in a team. My leadership skills are excellent and I have very good communication skills. Computer literacy is very proficient. During past years I have held positions ranging from Aircraft Pneudraulic Technician to Field Service Engineer and Manager to Product Support Coordinator. I am seeking a new association with a firm where I can contribute to its cost effective profitability. Equipment Maintenance Manager with extensive experience in the repair of all major plant and heavy equipment (open pit/underground.). I am a Journeyman Electrician with both open-pit and underground experience. My Mine Foreman and Mine Examiner Certificates are from Wyoming and are current. I am a Journeyman Electrician with both open-pit and underground experience, Worked as Lead Hand and Acting Boss as required. I'm looking for a remote fly-in job, or an ex-pat position. I am a Journeyman Heavy Duty Mechanic with supervisory experience. I am looking for overseas employment preferably contract work. I have some computer skills which include MS word, excel, access. I have developed and implemented preventive maintenance programs which proved very successful. Experienced Instrumentation and Controls Technician skilled in all phases of maintenance and troubleshooting of industrial control equipment. PLC, DCS, process controls, computer literate, first aid/cpr/aef certified. i'm working in australia by at 457 visa and i'm as a fitter. tolaly i have 12 years experince welder and boilar maker. and machanical. currently i'm working precision labour hire. my visa going to finish end of aug31.I would like to pursue a career in the technology/ engineering industry, with I'm a qualified red seal mechanic, done courses on drill riggs and are a qualified blaster and magazine master. I've done the Make Safe and Health Course. I was Site Manager for a Drill Company, blaster and drill rigg machanic for the past 6 years. LEADHAND, SHOP FOREMAN, HEAVY DUTY MECHANIC Iam a diesel fitter looking for work asap and have a strom mining and civil background I have extensive knowledge of all operations of the saw mill Heavy Plant Operator - 360 Excavators, Face Shovels rom 5 tonne to 200 tonne, Rear Dump Trucks from 5 tonne to 200 tonne. Loading shovels. Shotfirer 11 years Experienced in quarrying, hard rock gold mining, open cut surace mining. HD fitter, Experience on sandvik mining equipment, skilled at hydraulic and electrical trouble shooting. Candidate with Geochemistry background, looking for first job in industry. Exceptionally hard working with excellent computer and communication skills. Looking for a job.. willing to relocate. Administrative and mechanical skills Industrial Journeyman Electrician-28 years disiel mec h with experience trucks;earthmoving and hydroluics I am searching for employment with a company with longevity and stibility. 7 months Trainee at the International Institute for Geo-Information Science and Earth Observation (ITC), The Netherlands. Educational assistant first-year practical “Rocks, Maps and Profiles” '02, Part-time field assistant '99-'01. Member of the board of the Geological Society of Utrecht,'99-'00 trackless fitter OBJECTIVE: To Obtain a Position as a Shovel Operator, Excavator Operator, Electrician, Dozer Operator, Foreman or in Safety Department Red Seal Millwright, Class 1 Drivers Liscense, Mine Rescue, First Aid Ticket, H2S Alive, Whimis, Confined spaced entry and rescue, Fall protection. ERZ Controller (Underground Deputy) Qualified Boilermaker/ Welder, with over 25 years experience, mostly on mines and construction. 1   2   [ 3 ]   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   Seach Parameters Change search parameters... CATEGORIES: Trades/Skilled; INDUSTRIES: Mining; Change search parameters... Keywords: (e.g. mining engineer) Find results with: ANY of the words ALL of the words WITHOUT the words Save this search parameters... Post job with this search parameters... Frequently Asked Questions What's the most effective way to perform a search? Go to Advanced Search 1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results. 2. Enter one or two of the most important keywords. Click 'Search' and look through results. 3. To search within results add more keywords. How can I find resumes that contain specific exact phrase? To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD". More Frequenly Asked Questions...
Employer's Center » Employers Home » Feedback » Help » Post Jobs » Edit/Delete Jobs » Search Resumes » Resumes By Email » My Account » Log In » Log Out
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com