Resume - Trad qualified Fitter and Turner with extensive experience in the repair and mai...

Misco Jobs

Resume #27980

CONTACT INFORMATION:
View contact information...

OBJECTIVE:
Seeking an international position as an Oil Rig Worker where my previous Mechanical and Technical skills as well as my leadership abilities will help you to obtain your company's mission.

SUMMARY OF QUALIFICATIONS:
Over 10 years experience in the Engineering /Maintenance Field with expertise in the following: Pump Repairs / Equipment Maintenance and Repair / Supervision and Training of Mechanical Staff / Workshop General Administration / Maintenance Planning / Marine Radio and Rescue Operations

WORK EXPERIENCE:

March 2003 to Present: MECHANICAL CONTRACTOR, QUEENSLAND
Maintenance Fitter:
- Major Shutdown at Caltex / Ampol Refinery
- Replace and repair pump sets at BP Refinery Brisbane
- Install fuel transfer pumps at Brisbane International Airport refueling centre
- Maintenance at Visy Paper recycling centre
- Oven refit at Buttercup Bakeries
- Commission water pumps on Gas Pipeline (Papua New Guinea)
- Xstrata Copper mine (Mt Isa) Maintain and Repair Mining Equipment and systems
- Century Zinc Mine Shutdown
- Maintenance on Hydraulic Systems at Wivenhoe Dam Power station

June 1995 to March 2002: THOMPSON KELLY AND LEWIS (FLOWSERVE), QUEENSLAND, AUSTRALIA
Leading hand and Pump Fitter:
- Completed Apprenticeship as Fitter, Turner / Machinist.
- Replace and repair pump sets at BP Refinery Brisbane
- Install line pumps on Wivenhoe Dam to Tarong Power station Pipeline
- Supervisor in charge of Queensland Pleuger Submersible pump workshop
- Designed and built Pump footings and wells.
- Supervised Installation of pump sets at Brisbane City Council primary sewerage transfer station
- Install pumps on Awonga Dam to Callide Power station pipeline
- Installed dewatering pumps at Karangappe Gorge Gold mine (New Zealand)
- Installed and Maintained dewatering pumps at Blackwater coal mine
- Supervised Queensland service centre
- Emergency Evacuation Coordinator
- First Aid Officer
- Site Workplace Health and Safety Officer
- Responsible for work site audit accident investigations, noise survey, air / water quality, hydrogen sulfide breathing and detection systems
- Instructed classes in spill containment, and emergency response clean up

1994 to 1996: ACTION INDUSTRIAL, BRISBANE AUSTRALIA
Fitter (2nd Class):
- Completed construction of steelwork Cheese Chiller at Queensco Unity
- Shutdown at Smorgen Wire.
- Maintain and install wire bending machines at Smorgen Wire
- Assist refit of Eagle Farm Sewerage Treatment plant

1981 to 1987:ROYAL AUSTRALIAN ARMY, Australia
Infantry Soldier:
- Infantry Platoon Sergeant
- Managed 30 men in Platoon
- Daily administration of Platoon
- Responsible for the platoon efficiency.
- Conducted sanitation and hygiene inspections
- Instructed NCO's and Other Ranks on various matters that were required by their training.

EDUCATION:
- UNIVERSITY OF NEW SOUTH WALES, Bachelor of Science (Computing)
- SOUTHERN QUEENSLAND INSTITUTE OF TAFE, Certificate 3 in Engineering,
- OPEN LEARNING INSTITUTE OF TAFE, Diploma of Engineering (Mechanical)

Technical Training:
- NATIONAL SAFETY COUNCIL OF AUSTRALIA, Confined Space Entry
- NATIONAL SAFETY COUNCIL OF AUSTRALIA, Workplace Health and Safety Officers Stage 1
- NATIONAL SAFETY COUNCIL OF AUSTRALIA Workplace Health and Safety Officers Stage 2 (Industrial)
- FESTO TRAINING, Pneumatics 1
- FESTO TRAINING, Pneumatics 2
- TAFE QUEENSLAND, Fluid Power
- TAFE QUEENSLAND, Forklift Safety and Operation
- TAFE QUEENSLAND, Electrical 1 & 2
- NATIONAL SAFETY COUNCIL OF AUSTRALIA, Firefighting 1
- ST JOHNS AMBULANCE, Senior Advanced First Aid
- INSTITUTE OF ENGINEERS AUSTRALIA, Quality Management for Engineers
- TAFE QUEENSLAND, Marine Radio Certificate (VHF/HF)
- TAFE QUEENSLAND, Certificate 4 in Workplace Training and Assessment

Hobbies and Interests:
- Rugby Football
- Sailing
- Reading
- Computers and Electronics

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 351 to 400 of 864)

Go to Search Parameters...

Brief Description

I have a lot of experience in many different industries. I am a fast learner and a hard worker. I have good organizational and management skills. My employers and fellow employees consider me a pleasure to be around and easy work with.

Electrician with over 20 years experience

-1 yr: Business Consult. in Comm. Futures Trading for analysis commodity markets -1 yr & 2 mths: implement, maintain database & filing system -2 yrs: Expl. Geologist working in the field at remote locations, produce maps,maintain database; Sound knowledge of safety policies

Managing, organising and participating in geological field studies, drilling and geological testing programAnalysing geological, geochemical and geophysical survey data, well logs and other test results, maps, notes and cross sections, core samples, drill cuttings and rock samples

Manage 20 maintenance personel on repair of equipment and building ,order arts and maintain inventory, prioritize and issue work orders.

Professional Qualifications: BE Sales & Marketing Open, City & Guilds Mechanical Technician,ONC Pipe Maintenance & Instillation,NVQ Level I, II, III Quality Auditing,Diploma supervisory management Team Leadership I & II,

Timed served Diesel mechanic with three years post trade experence. Specialising in heavy earth moving equipment.

Seasoned Professional with 14 Plus years varied experience in the Geology Field. Relocation possible.

Hard worker and can run all heavy equipment and maintence

Project Management / Inspection / Procurement / Quality Assurance

Diesel mechanic/ Fitter 20 years mining experience

To abtain a position as a technition, or maintenance employee. Skills are mostly Mechanical and Recovery for wheeled vehicle, Heavy and light. Also over 6 years in the US Military

Find a job in the mining industry to continue using the broad knowledge of mining techniques that I have; and learn new ones.

Journeyman Electrician Red Seal Endorsement

Heavy Equipment / Crane Mechanic / Welder

Mechanic; Hydraulic Tech; Crane Operator - Mechanic; Detroit & Allisson Transmission Mechanic

I've been around heavy equipment since I was young, working on cash crop farms and then construction equipment like lift trucks, dozers and pay loaders , and now want to re-enter the work field in what I know best and enjoy the most.

Looking to start my career in the mining industry as a 2nd year heavy duty mechanic in the summer of 2004. I will be graduating from Assinibione Community College with my level 2 certificate in heavy duty, farm, and transport.

I have been working in the mining industry for the past 29 years. I have gained a large amount of experience using several types of mining equipment over the years. I have been commended on my attention to detail, safe work practices and team work. I know I would be an asset to your company.

Experienced offshore Client Representative and qualified Hydrographic surveyor; with Master's ticket, NEBOSH, MCSE .

Electrician looking for a career in th mining industry

Electrician - Certified

Seeking a full time position as a mid level or journeyman welder.

Seeking employment in open pit or quarry work as a heavy duty repairman

A technocrat with proven experience in the filelds of Marketing and business development, general management of multinational Industrerial valves manufacturing organizationas with an experince of 14 years.

Mechanical Fitter, Mining Experience, Various Machinery Tickets.

* PROJECT / PROGRAM MANAGEMENT * OPERATIONS * ENGINEERING *

Been supervisor of a small rock crusher for over 2 years. Worked in mining for 4 years; experience: loader, backhoe, dozer and a little trackheo, and a jawed crusher. Perform maintance and upkeep of plant

Operator - dozer,loader, excavator, shovel, backhoe, drill I can operate large or small equipment I have machinest experience I have been general manager of surface mine in charge of all operations currently operate my own equipment in excavating business

3) One year course in operation and maintenance of Heavy Earth moving Hydraulic equipment like Bulldozers. Pavers JCB sensor paver etc. experience in operation and maintenance of bulldozers J.C.B. writgen surface miners sensor paver etc.

Graduate Mining engineer

I am a machinist by trade, got into service tech., then field machining and enjoyed it.

My experience includes the Superintendent level managing maintenance crews for a nickle smelter. I have a trades background of 25 years which includes millwright; welding and machinist. I am currently working for a large Nickel Project overseas and have extensive experience with RCM.

MECHANIC/WELDER/GENERAL MAINTENANCE & REPAIRS

Journeyman Electrician

N1,N2,Volvo Electrics,Volvo Backhoeloader BL70/71-Powerscreen Service Course-4wk Training Diesel Pump Room - 4 wk training Auto Electrical-Trade Recognition Assessment Test

Looking for Heavy Industrial Fitter/Mechanic type role - me with 5years experience - worked on Caterpillar, Komatsu, Hitachi, O.K etc. I am seeking employment in QLD, NSW or oversea, available to start at the end of this week and willing to relocate worldwide. Committed, reliable, and ready to go.

Looking for management position in mineral (gold and precious metals) exploration and environmental engineering consulting.

A proactive leader with extensive reliability centered maintenance management and hands-on experience in the repair, overhaul and troubleshooting of mobile equipment, initiate change and reengineering of quality improvement processes while maintaining a positive, safe and productive environment.

Multi skilled and flexable. Highly experienced mechanical fitter presently contracted to ITT Systems Division, Kuwait. More than 12 years overseas experience, working in Europe and the Middle East.

12 + Years HSE experience, HSE professional Tech IOSH; NEBOSH & (USA) NASP safety certification (Equiv DIP)

welding of pressure/vacuum vessels, fabrication of heavy plant and machienery

Supervision, planning, scheduling, coordination, maintenance (prevantive & breakdown), budgeting/forecasting, optimum inventory management, resource development & deployment, utilities etc.

Automation/Electrical/Instrumentation/Supervisor

I am a qualified Technician/Trades Person with a Diploma in Electrical Engineering.My skills include among others excellent trouble shooting and analysis,speed and accurracy, redesign and modification skills, ability to read schematics and drawings and computer literate.

Trad qualified Fitter and Turner with extensive experience in the repair and maintenence of pumps and pumping equipment.

Licenced Electrician, Refrigeration Mechanic, Qualified Fitter and Turner, Cert 4 Assesment and Workplace Trainer, Workplace Health and Safety Officer. Trade foreman

Mechanic/Welder Field, shop, underground

Grader Operator at Stillwater Mining Company. Have 2 years experience in underground road construction.

I am a CCO crane operator willing to travel.

1 2 3 4 5 6 7 [ 8 ] 9 10 11 12 13 14 15 16 17 18

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out