Resume - Multi skilled and flexable. Highly experienced mechanical fitter presently contr...

Misco Jobs

Resume #39441

CONTACT INFORMATION:
View contact information...

Highly experienced mechanical fitter presently contracted to ITT Systems Division, Kuwait. More than 12 years overseas experience, working in Europe and the Middle East. Now seeks a greater challenge, with more responsibility and the option for future progression. Served a mechanical apprenticeship with Wilson and Sumnul (Renown), in Cheshire UK. Experience includes work in aeronautical, rail and automotive fields in both the civil, and defence, industry sectors. Aeronautical training was provided by British Aerospace, Chester.

RECENT EXPERIENCE
May 05 – Present: ITT, Systems Division; Heavy Mobile Equipment Mechanic Global Maintenance and Supply Services - Kuwait
* Provide depot level maintenance and repair for US Army vehicles and equipment
- HMMWV series
- 5 Ton series
- Trailers
* Tool Room and Bench Stock Support
- Accountability for all tools and support equipment used in the section
* Parts Turn In
- Preparing parts and paperwork for return to the US Army Supply System

January 05 – May 05: US Army Vehicle Repair and Maintenance
Germany & Holland (USAREUR 1st Armoured Div. and NATO)
* Contracted to perform mechanical support and Technical Inspection of medium & light vehicles and equipment;
- 5 Ton Series
- HMMWV Series
- Trailers
- Generators

September 03 - December 04; E-One Europe
* Team Lead for a military specialist vehicle project;
- Assembly of bespoke vehicles, cradle to grave
- Rebuild of previously assembled vehicles
- Fit electrical equipment, overhaul and service of engine and gearboxes

Wheel and Track Vehicle Experience
DAF Eindhoven Holland
* Lead mechanic performing test and delivery duties including;
- Mechanical fitting, engine testing
- Fault rectification
- Quality inspection
Ministry of Defence compound (UK)
* Repair and rebuild;
- Rolls Royce (Engine only)
- Foden (Chassis, Transmission & engine)
- ERF (Chassis, Transmission & engine)
- DAF (Chassis, Transmission & engine)
- Scammell (Chassis, Transmission & engine)
* Incorporated customer modification requests
* Performed Quality Control checks and testing
* Engine assembly

Power Generation and MHE Experience
Knight and Simcock
* Fitter
- Generators
- Pumps
- Other plant machinery
- On site repair of
- Pump and generator
- Tracked and wheeled machinery
Power loyal UK
* Field Service Engineer
- Plant machinery equipment
- Diesel engines
- Hydraulic equipment
- Lifting equipment: folk lifts cranes etc
* Fault diagnosis test and rectification

Aircraft Experience
Bombardier Aerospace
* Lead Fitter
- Ensures all production targets are met
- Responsible for ensuring all panels are built on time and to specification
- Jig loading of structures
- assembly of panels
- RNC repairs
- Insuring that all other contractors are working on schedule
- Meeting with the production manager to ensure smooth running of the section
Astrium European Defense and Space Program
* Assembly, Integration & Test Engineer
- INMAR and INTEL Sat Projects
- Inspection of flight hardware
- Assembly and Integration of electrical equipment
Marshals Aerospace
* MOD Fitter
- Production of aluminium & expanded foam laminate panels
- Alter as per drawing & fitting
- Repair of composite structures
- Assembling composite panels
Fokker /Stork Holland and France
* Airbus Maintenance
- Bulkhead repair
- Undercarriage repair

MartinAir
* Boeing 747 conversion refit from Cargo to Passenger
- Removal of cargo equipment
- Fit galley, toilet, luggage racks, seats and interior
* Boeing 767
- 'C' checks
- Sheet metal work/Mechanical fitting
- Fitting interior/Seat repair and fitment
- Repair of composite floor panels Galley repair & fitting
BAE Systems, Filton
* A300/VC10 Fitter
* Manufacture parts to support overhaul
- Preparation f structure to install serviceable parts
- Corrosion control
* Work and incorporate design mods to existing structure including
- Torque box
- Cabin interior
- Basic fuselage structure
- Cargo conversion
British Aerospace, Chester
* A300, A340, A3290-321, BAe 125
- Assembly of structures,
- Set up spars to jigs & frames
- Set up skin panels to jig, structure, drill off skin panels & reinforcing for taperloc, interface & cold working standards
- Final assembly of
- Wings
- fuel systems
- track cans
- dry bay doors
- 'D' noses
- Fuel leak checks using helium & fuel
- Carrying out concessions & S/O's
- Working accurately to requirements to meet quality control standards

Rail Experience
British rail Crewe works
* Electric traction depot Crewe, cat 4 fitter
* Rebuild of locomotives
* EMU
* Diesel Electrical locos
Alstom
* Mechanical /electrical fitter
- Train checks
- Service of diesel/electric locos
- HST
- Carriages
* Railway carriage interior fitting
* Mechanical Equipment installation
* Manufacture of rail carriages

COMPUTER SKILLS
Microsoft office, word, PowerPoint, excel

EDUCATION & QUALIFICATIONS
* City & Guild motor vehicle craft studies
* Total Quality Management (British Rail)
* None Destructive Testing (not current)
* CITB Scaffold Awareness

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 351 to 400 of 868)

Go to Search Parameters...

Brief Description

My job is too repair stoppers drills jacklegs drills sandpippers pumps, double diaphragm pumps, & others any small compressed air machine I can fix screen pushers, airlegs .

Underground hard rock mining

Load overburden, split coal, push in a shop

Hard worker pursuing a career in the mining industry. Experienced in heavy equipment repair. Mechanical aptitude and willing to learn.

Transportation professional seeks new challenge. Will consider entry level or other qualified offers.

Trade qualifed Vehicle mechanic, experience as a Heavy Diesel fitter/Hydraulics/Mining Equipment etc.

I have a lot of experience in many different industries. I am a fast learner and a hard worker. I have good organizational and management skills. My employers and fellow employees consider me a pleasure to be around and easy work with.

Electrician with over 20 years experience

-1 yr: Business Consult. in Comm. Futures Trading for analysis commodity markets -1 yr & 2 mths: implement, maintain database & filing system -2 yrs: Expl. Geologist working in the field at remote locations, produce maps,maintain database; Sound knowledge of safety policies

Managing, organising and participating in geological field studies, drilling and geological testing programAnalysing geological, geochemical and geophysical survey data, well logs and other test results, maps, notes and cross sections, core samples, drill cuttings and rock samples

Manage 20 maintenance personel on repair of equipment and building ,order arts and maintain inventory, prioritize and issue work orders.

Professional Qualifications: BE Sales & Marketing Open, City & Guilds Mechanical Technician,ONC Pipe Maintenance & Instillation,NVQ Level I, II, III Quality Auditing,Diploma supervisory management Team Leadership I & II,

Timed served Diesel mechanic with three years post trade experence. Specialising in heavy earth moving equipment.

Seasoned Professional with 14 Plus years varied experience in the Geology Field. Relocation possible.

Hard worker and can run all heavy equipment and maintence

Project Management / Inspection / Procurement / Quality Assurance

Diesel mechanic/ Fitter 20 years mining experience

To abtain a position as a technition, or maintenance employee. Skills are mostly Mechanical and Recovery for wheeled vehicle, Heavy and light. Also over 6 years in the US Military

Find a job in the mining industry to continue using the broad knowledge of mining techniques that I have; and learn new ones.

Journeyman Electrician Red Seal Endorsement

Heavy Equipment / Crane Mechanic / Welder

Mechanic; Hydraulic Tech; Crane Operator - Mechanic; Detroit & Allisson Transmission Mechanic

I've been around heavy equipment since I was young, working on cash crop farms and then construction equipment like lift trucks, dozers and pay loaders , and now want to re-enter the work field in what I know best and enjoy the most.

Looking to start my career in the mining industry as a 2nd year heavy duty mechanic in the summer of 2004. I will be graduating from Assinibione Community College with my level 2 certificate in heavy duty, farm, and transport.

I have been working in the mining industry for the past 29 years. I have gained a large amount of experience using several types of mining equipment over the years. I have been commended on my attention to detail, safe work practices and team work. I know I would be an asset to your company.

Experienced offshore Client Representative and qualified Hydrographic surveyor; with Master's ticket, NEBOSH, MCSE .

Electrician - Certified

Seeking a full time position as a mid level or journeyman welder.

Seeking employment in open pit or quarry work as a heavy duty repairman

A technocrat with proven experience in the filelds of Marketing and business development, general management of multinational Industrerial valves manufacturing organizationas with an experince of 14 years.

Mechanical Fitter, Mining Experience, Various Machinery Tickets.

* PROJECT / PROGRAM MANAGEMENT * OPERATIONS * ENGINEERING *

Been supervisor of a small rock crusher for over 2 years. Worked in mining for 4 years; experience: loader, backhoe, dozer and a little trackheo, and a jawed crusher. Perform maintance and upkeep of plant

Firefighter, Search and Rescue Instructor, Safety Instructor, First Aid Instructor, Emergency Response Coordinator, Team Leader, Crew Chief,

Operator - dozer,loader, excavator, shovel, backhoe, drill I can operate large or small equipment I have machinest experience I have been general manager of surface mine in charge of all operations currently operate my own equipment in excavating business

3) One year course in operation and maintenance of Heavy Earth moving Hydraulic equipment like Bulldozers. Pavers JCB sensor paver etc. experience in operation and maintenance of bulldozers J.C.B. writgen surface miners sensor paver etc.

Graduate Mining engineer

I am a machinist by trade, got into service tech., then field machining and enjoyed it.

My experience includes the Superintendent level managing maintenance crews for a nickle smelter. I have a trades background of 25 years which includes millwright; welding and machinist. I am currently working for a large Nickel Project overseas and have extensive experience with RCM.

MECHANIC/WELDER/GENERAL MAINTENANCE & REPAIRS

Journeyman Electrician

N1,N2,Volvo Electrics,Volvo Backhoeloader BL70/71-Powerscreen Service Course-4wk Training Diesel Pump Room - 4 wk training Auto Electrical-Trade Recognition Assessment Test

Looking for Heavy Industrial Fitter/Mechanic type role - me with 5years experience - worked on Caterpillar, Komatsu, Hitachi, O.K etc. I am seeking employment in QLD, NSW or oversea, available to start at the end of this week and willing to relocate worldwide. Committed, reliable, and ready to go.

Looking for management position in mineral (gold and precious metals) exploration and environmental engineering consulting.

Previous warehouse work..good hard worker ,fast learner

A proactive leader with extensive reliability centered maintenance management and hands-on experience in the repair, overhaul and troubleshooting of mobile equipment, initiate change and reengineering of quality improvement processes while maintaining a positive, safe and productive environment.

Multi skilled and flexable. Highly experienced mechanical fitter presently contracted to ITT Systems Division, Kuwait. More than 12 years overseas experience, working in Europe and the Middle East.

12 + Years HSE experience, HSE professional Tech IOSH; NEBOSH & (USA) NASP safety certification (Equiv DIP)

welding of pressure/vacuum vessels, fabrication of heavy plant and machienery

Supervision, planning, scheduling, coordination, maintenance (prevantive & breakdown), budgeting/forecasting, optimum inventory management, resource development & deployment, utilities etc.

1 2 3 4 5 6 7 [ 8 ] 9 10 11 12 13 14 15 16 17 18

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out