Resume - Graduated Mechanical Enginner with Extensive Experience in Europe, Australia and...

Misco Jobs

Resume #56078

CONTACT INFORMATION:
View contact information...

CAREER GOALS

Seeking a challenging position requiring demonstrated skills in leadership, planning and communication, thus utilizing inter-personal skills with my experience, educational qualifications and technical knowledge.

PROFILE SUMMARY

* 10 years experience in maintenance in industry, mining, offshore oil,
* Exploration and petro-chemical process plants.
* 3 years solid experience in projects in the mining industry in Australia.
* Exposure to plant operations, production, planning and management skills.
* Leadership skills in motivating others and building a real team spirit.

ACADEMIC CREDENTIALS

* Further planned studies for 2007 to 2008:
Presently enrolled at Ellis College (New York Institute of technology to study a Project Management Degree online starting in Spring 2007)
* Graduated with Distinction BSC Mechanical Engineering Almeda University USA in September 2006.
* Graduated Balga High School in 1985, Perth, W.A. Australia. I completed year 12 with physics, mathematics and chemistry as main subjects.
* 4-year apprenticeship diploma as Diesel Hydraulic Mechanic in Western Mining Corporation, including a 1-year study in the College of T.A.F.E. (Technical Adult Further Education) in Australia.
* 1 year Steam Utilization Engineering course provided by Spirax Sarco Ltd. England.
* Course in computer education and application.
* ROVC Technical College in Amsterdam completed a Maintenance Management Study provided during my employment with General Electrics.
* Automatic Power Control System course provided by Spirax Sarco Ltd. England.
* Hot Water Treatment course provided by Spirax Sarco Ltd. England.
* Computer courses, Lotus Notes, Windows, Electronic software control program's, PLC systems.

TOP CAT TRAINING:
Electronic technician, 3161 regulator/governor, electronic controls, Service Information System (SIS), 3500 series – troubleshooting, T.A. (Technical Analysis), HEUI Injector Systems, MEUI Injector Systems, TESTO analysis for gas engines, trouble shooting C Series, Marine & Industrial Engines, 3412E, 3176, 3196, 3406E, 3516B, 3606,3608 Marine & Industrial Engines trouble shooting, Certified Caterpillar Marine Analyst, Capstone Micro turbines, Caterpillar Gas Engines, G3400 & G3500 Series, and the 3520 1.3 MW, Gas Engine/Generator set.

OTHER PETROCHEMICAL EQUIPMENTS EXPERIENCE:
Worthington Turbines. Regenerative disc friction pumps, compressors, Heat exchangers, reactors, coolers, and sundyne pumps.

EARTHMOVING EQUIPMENT EXPERIENCE:
Caterpillar range of Excavators, loaders, graders, Volvo EC range of multi tasking Construction equipment, Tamrock CHF1000 and Atlas Copco Rock drilling rigs, Ingersoll rand DM range of Rock drilling equipment

SAFETY TRAINING:
HUET training (Helicopter Underwater Escape Training), NEN3140 Electrical Safety training. Dutch VAC Basic Safety Training, and Certification, Underground rescue and survival training certification in Australia. Attended many seminars and safety courses. Fire Fighting training and Fire Escape training at the DHTC Institute in Den Helder, located in The Netherlands, Europe.
NBC (nuclear & biological protection training at KBR Houston).
Safety Training TSTI, procedures at US Base camps.

WORK EXPERIENCE

Kellogg Brown Root (KBR), Houston, Texas, USA
January 2007 – present: Prime Power Caterpillar Generator Foreman (Engines)
Location: KBR Camp Lemonier, Site 4, US Base in Djibouti, Africa
Duties:
* I am responsible for the Caterpillar Engine Prime Power Generator Units at Prime Power.
* I organize the job planning, maintenance procedures, troubleshooting, and overhauls of power generation Units at Camp Lemonier Djibouti Horn of Africa.
* I lead a small team of local and international mechanics and train them to the Caterpillar Standards of maintenance and procedures on these engines.

Geveke Motoren BV (Caterpillar), Aalsmeer, the Netherlands
January 2002 – June 2006: Service Engineer
Duties:
* Commissioning new engines for our customers.
* Service & customer support.
* Periodical engine overhauls.
* Troubleshooting.
* T.A. (Technical Analysis) inspections.
* Service & support to the offshore N.A.M. oil platforms.
* Co-ordination and job planning.
* Inspections.
Achievements:
* Successfully commissioned the Global Switch project with the installation of five 3516B engines / generators of 1856 kW.
* Commissioned the M/S Compromise Holland's largest inland oil tanker.
* Commissioned the Nijlpaard Floating Crane at OBA (Overslag Bedrijf Amsterdam) 3512B engine tandem Generator set.

Brambles Steel, Velsen-Noord, the Netherlands
2001: Workshop Manager
Duties & Achievements:
* Manager of the workshop and staff (15 fitters and 2 welders).
* Operations of special steel transport vehicles for the Corus steel plant in The Netherlands.
* Planning of work, time management.
* Service & customer support.
* General management of staff, meetings, problem solving, safety seminars.
* Overseeing third party agreements, purchase of new equipment, technical adviser to senior management in purchase of new equipment.

Samsung / Volvo Heavy Equipment Europe BV, Groot Ammers, the Netherlands
1998 – 2000: Mechanical and Hydraulic Specialist / European stock controller
Duties & Achievements:
* Managing the operations of equipment assembly, staff, and third party contractors at ETS (European Transport Systems) site in Grootammers, The Netherlands.
* Managed the warehouse staff and parts department at ETS site.
* Developed and Modifications hydraulic systems on excavators for multi-function task, for example breaker/crusher/tilting/rotation functions on SE450, SE350, SE240-LC-3, SE210-LC-3, 170W-3, 130W-3 excavators.
* Hydraulic modifications on SL120, SL150, SL180, SL250 and SL330 front-end loaders and the range of Volvo EC Excavators electrical and hydraulic trouble-shooting on machines.
* Pre-delivery inspections of machines at ETS site.
* Stock control of all equipment for Europe.
* Managed all technical operations of equipment and pre-delivery inspections of equipment.
* Provided my expertise in modifications of hydraulic, electrical systems on the machines.
* Supervised all technical modifications and requirements for our network of dealers and customers in Europe.
* Modified the SL180-2 loader into automatic transmission.
* Successfully modified the 170W-3 two-piece boom hydraulic excavator multifunctional hydraulic system for tilting-, grab-, crusher- and breaker function.
* Daily reporting to the Management of Operations at ETS site.
* Conducted all CE inspections, sound and vibration tests for the new Volvo EC range.
* Provided technical, support and expertise to Volvo Dealers with equipment.

G.E. Plastics ABS, Amsterdam, the Netherlands
1997: WTB-mechanic "A" Supervisor
Maintenance duties:
* Responsible for daily maintenance of process equipment.
* Responsible to oversee trouble shooting and problematical equipment.
* Reporting to the Maintenance Department to improve such problematical conditions.
* Using technical skills to modify equipment.
* Job planning.
Achievements:
* Installed the new H.P. Banbury Mixer/H.G. Banbury Mixer/H.N. Banbury Mixer.
* Modification of the steam control valve system with the help of Spirax Sarco Ltd., The Netherlands. To overcome temperature control problems on the mills, which have troubled G.E. Plastics for the past 15 years.

Jean Heybrooke, Houten, the Netherlands
1996: Service Technician
Duties:
* Responsible for assembly of TORO lawn mowing equipment.
* Responsible for providing service to customers.
* Responsible of assembly of Ditch-Witch boring equipment.
Achievements:
* Successfully installed a power pack system for the Ditch-Witch unit from the USA for a Dutch customer and modified hydraulic unit.

ABEKO BV, Beverwijk, the Netherlands
1994 - 1995: Heavy Equipment Engineer
Duties:
* Repairs and overhaul of earthmoving equipment.
* Modifications of Hydraulic functions for multi-task operations of equipment.
Achievements:
* Successfully modified a CAT 235 excavator on tracks into a mobile excavator on wheels.

EXPERIENCE IN AUSTRALIA AND NEW ZEALAND

SUBCONTRACTOR; SELF-EMPLOYED, PROVIDING SERVICE TO THESE COMPANIES:

Adia Personnel and Davin Industries, Christchurch, New Zealand
1993: Mechanic
Duties & Achievements:
* I worked on contract at the Expansion Project of Canterbury Timber Products. During this period I was involved in the installation of new pumping systems and power generating systems and the installations of the extended conveyors. I found the project educating and interesting.

Skilled Engineering, Burswood, Perth, W.A. Australia
1991 – 1992: Mechanic. Subcontractor
Duties & Achievements:
* I worked for this company in the year 1991 to 1992 on contract on shutdown jobs at various sites.

Parkside Drilling Contractors, Cosmo Howely Gold Project, N.T. Australia
1991 – 1992: Mechanic Engineer subcontractor
Duties & Achievements:
* I worked on contract for this company for approx. 6 months and my job included the repairs and maintenance of 712,812 Atlas Copco and CHF 1000 rock drills. I was the leading hand in the maintenance and in charge of a small maintenance crew.

Monodelphous Engineering Ltd., Perth, Western Australia
1991 – 1992: Mining and oil exploration personnel (subcontractor)
Duties & Achievements:
* I worked as a sub contractor on various mining sites and projects around the country; Dominion Mining, Hayes Creek Gold Mining Project, Argyle Diamond Mining Project, MT Gibson Gold Mining Project, Offshore Oil Exploration Projects in Exmouth and Dampier on the west coast of Australia.

Elf Aquitine Exploration Australia Pty Ltd., Sydney, Australia
1990: Maintenance technician
Duties & Achievements:
* I worked in this company on sub contract. I was involved in repairs and maintenance of equipment and breakdown and shutdown jobs from time to time. The operations were in the Bass Strait in the Tasmania Sea. For other oil exploration projects of the company, I was sent from time to time as and when needed to the various sites.

Taipan Resources Ltd., South Perth, Australia
(Mining and oil exploration personnel)
1989: Underground mobile mechanic
Duties & Achievements:
* I was employed as an underground mobile technician at long shaft nickels mine; site Kambalda, Western Mining Corporation. The mine was an underground site approx. 1,900 meter deep (shaft). My job included the repairs and maintenance of mobile equipment, Tamrock and Atlas Copco Jumbo Rock drills; pumping systems, loco trains, crushers, rock breakers, diesel equipment boggers, preventive maintenance and trouble shooting. This was a very demanding job fit for the brave, I enjoyed it.

PROFESSIONAL DEVELOPMENT & PERSONAL

* Attended extensive safety courses in the mining industry.
* Courses on computer technology.
* Attended seminar "Dealing with maintenance and process problems at work".
* Continued my education with courses to keep up with technology and knowledge.
* Represented my own case to the European Court of Human Rights in family and human rights law, which was one of my greatest achievements in contributing to society and in the field of human rights.

LANGUAGES

* English: mother tongue
* Dutch: fluent

REFERENCES

Excellent professional and personal references available upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 501 to 550 of 945)

Go to Search Parameters...

Brief Description

MSc environmental sciences with a strong focus on air pollution and health risk assessment

Im msc chemistry qualified chemist worked in iron ore mine in diff field as sampling,chemical and physical analysis, administration

Project maintenance manager/planner/trainer

Complete Facility Maintenance

Maintnenace Foremen looking for longterm employment

Graduated Mechanical Enginner with Extensive Experience in Europe, Australia and Africa in Power generation, Oil Exploration, Mining Industry

Extensive Experience in the industry!!

Dynamic supply chain specialist with over 15 years’ combined experience across a wide range of activities (project management, commodity purchasing, services and contracting procurement, inventory control). Extensive expertise supported by top Canadian (C.P.P) and USA (C.P.M.) professional designati

Communicator, negotiator, manager, natural leader

20+ years in culinary field,client pleaser,professional with a sense of humor

IT PROJECT MANAGEMENT

Logistics Manager, Rig Manager, Materials Manager

Manager / Engineer ( HW / SW / QA / Training )

Maintenance manager

IT Project Management, IT Infrastructure/Network Specialist, DRP & DRS Projects, ERP Implementations, Systems Administration & Support, etc. / Bachelor of Science in Computer Science (BCS).

African experienced exploration hydrogeo / geologist Liberia Ethiopia Sudan

A highly motivated intelligent manager, who is very hard worker both individually and in a team, copes well under pressure, well presented, enthusiastic. Excellent communications skills, creative, and problem solving skills, and an effective organizer. Adaptable to new situation, determined

Surveyor, QC, upstream, oil, gas, seismic, geophysical, exploration, production, pipeline, module, construction

LICENCED AIRCRAFT MAINTENANCE ENGINEER

Africa specialist - 25 years Africa experience, 16 years work experience, general management (production, materials, logistics and international transport fields), 14 of which are at managerial level, the last 11 years being spent as an expat in West Africa and West-Central Africa.

Inspeection and repairs Daf Trucks, Matlab, Simulink, Excel, MS Word

Cad design, cnc machine operation, electrician residential, commercial and power company

Electrical Eng./Supervisor - Power Plant

QA/QC welding isnpetion experience on US & overseas projects. CWI, Level II MT, UT, PT, RT film interpretation

A Procurement and Logistics professional with comprehensive experience of administration, procurement, contracts, logistics and management

Finished trade as Heavy Diesel Mechanic August 2009 work on heavy earthmoving equipment for 3 years as well as Air Start Underground equipment for 5 months at Rio Tinto Site. Six month work as Breakdown Fitter at a Rio Tinto site Australia for contracting company.

High Voltage 3.3 - 275 KV , SAP maintenance programmer

MIG) Gas Metal Arc Welding, (TIG) Gas Tungsten Arc Welding, (SMAW) Shielded Metal Arc Welding “Stick”, OXY-ACETALENE Welding and cutting. I have also been trained in Pipe Welding, and have an extensive knowledge of Ferrous and Non-Ferrous metals along with numerous skills in metal fabrication.

diesel engine mechanic, rig mechanic , generator mechanic

PhD in geochemistry, experience in trace and major elements, radiogenic Isotopes (Sr-Nd-Rb-Sm-Pb-Hf) and U-series isotopes. My research focused on the application of short-lived, U-series isotopic disequilibria to constrain, the time scales of magma formation, transport and differentiation.

25 years mining and heavy industrial , power generation,technical trainer,maintenaince supervision superintendent roles, 6 years expat work in 4 countrys ,extensive exposure to MARC's and dealer systems,all mining equipment covered diesel and electric

Professional engineer with wide ranging international experience in project, engineering, reliability, business development, sales and commissioning of refinery.

I am a hard working self disciplined person with good values. I've got lots of experience in both my fields of qualifications. Earthmoving Mechanic (Heavy duty mechanic)

A foundry professional with 8 years of experience in foundry, aluminium industry. Areas include grey/ ductile iron melting, green sand/ no bake moulding and also familiar with all foundry operations.

I am Professional Logistician (CITT), Certified Purchaser and Journeyman, H/D-Partsman (automotive and mining equipment-including underground) and Warehouseman.

Over 26 years experience of Gological Explorations for various minerals in Government Sector. Now seeking for an upward change.

Coal Procurement Specialist, Foreman, MSHA Certified

40 years in the land surveying profession, 30 years as a Licensed Land Surveyor, Multi-state Licenses

Telecommunications Professional Engineer with strong analysis capability, deep knowledge on telecommunications networks and telecom business processes. Outstanding operating, managing and administrative skills. Proficient usage of office utilities and advanced expertise with excel macros.

International Trade such as Import & Export Business, Offers, Sales Promotion, Market Research, Different Business Reports / Information's, Estimations and Future Business Plans beside some Administrative Work etc

Field Service Engineer

Highly qualified in security, safety and rescue work, a lot of experience in helicopter rescue, work and training camp experiences, military education, calm, reliableand flexible

Qualified Boilermaker, Current Bluecard, Worsley inducted, MC License, Confined spaces trained, Currently studying Cert 4 in OH&S

Instrument Specialist with over 13 yrs experience in both domestic and overseas facilities.

Around 20 years experience in all QA/QC activities up to final certification of equipment and projects catering to Oil & Gas (Production Platforms, Refinery, Petrochemical, Fertilizer), Power plants (Nuclear & Thermal) and Shipbuilding.

By having multi-discipline skill; I have 21years of combine technical work experience in Project Management/ Consultant/ Coordinator/ Advisor/ Engineering/ Fabrication/ Construction/ Erection/ Installation & Maintenance work on both offshore & onshore.

I have worked in management positions for over 15 years in both the construction and manufacturing industries. I have had up to 120 employees under my supervision at any given time. HR, production, purchasing, documentation and inventory all under my supervision. Workflow and quality #1 priority.

Construction / mining / environmental

I have experience in Project management and planning, Maintenence Management and planning, Civilworks, Mechanical and electrical experience

BSc Applied Geology, with experience in near surface gold exploration as well as geological modeling of various ore bodies at a consultant level. Knowledge of mine design software such as Datamine and also GIS software. Competent traveller.

1 2 3 4 5 6 7 8 9 10 [ 11 ] 12 13 14 15 16 17 18 19

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out