Resume - I am a process engineer with foundation in Chemical Engineer with keen interest ...

Misco Jobs

Resume #66909

CONTACT INFORMATION:
View contact information...

CAREER SUMMARY AND OBJECTIVE
Keen, results-oriented with strong research capabilities. Involved in different assignments in the field of mineral processing i.e. operations, plant start up and commissioning, research and commercial projects at both laboratory and pilot scale.
My career objective is to gain challenging experience in engineering and develop experts in mineral processing and utilise the skills acquired through learning and practical experiences.

EDUCATION BACKGROUND
UNIVERSITY OF THE WITWATERSRAND, JOHANNESBURG (JULY 2003-NOVEMBER 2005)
Master of Science in Chemical Engineering
Field of Research: Mineral Processing
Thesis: Effects of Grinding Media Shapes on Ball Mill Performance
Award held: Scholarship based on Academic Merit Award

UNIVERSITY OF DAR ES SALAAM- TANZANIA (SEPT. 1996- JULY 2000)
Bachelor of Science in Chemical & Process Engineering
Award: BSc. (Eng.) WITH HONOURS (UPPER SECOND CLASS)

SHORT COURSES ATTENDED
GOLD FIELD TRAINING SERVICES (South Africa) (AUGUST-OCTOBER 2000)
Attended course in performance management for technical supervisors and extractive metallurgy at Gold Field Training Services (GFTS) in Catonsville
Award:
* Certificate in Performance management
* Certificate in Extractive metallurgy

WORKING EXPERIENCES
MINTEK, Council of Minerals Technology (APRIL 2006- To DATE)
Position: Engineer
Field: Mineral Processing Division (Comminution)
Responsibilities:
* Coordinating commercial projects
* Execution of metallurgical testwork in line with mineral processing division
* Undertaking and coordinating routine service work and communicate results to clients.
* Supervise and coordinate the activities of subordinates
* Provide technical and practical guidance in execution of experiments

COMPS (Centre of Materials and Process Synthesis, School of Process and material engineering, Wits), (December 2005-March 2006)
Position: Research Student
Responsibility:
* Laboratory tests investigating the effects of grinding media shapes on ball mill performance in terms of grinding kinetics, load behaviour and mill power.
* Conducting tests to investigate the effects of gas flow rates, mill speed, and mill inlet design as well as lifter/liner profiles on mill capacity in terms of pulverised fuel production (ESKOM-PROJECT)
Other tasks:
* Assisting in engineering laboratory experimentation as demonstrator for third year student, 2003.
* Process Control tutoring for third and fourth year Chemical and Metallurgy students, 2004.
* Biomedical engineering tutoring for third and fourth year Chemical and Biomedical Engineering student (First Semester 2005)

M.G.S. International (T) Ltd (DEC. 2001 –JULY 2002)
Position: Planning Engineer
Responsibilities:
* Preparing a monthly lubricant blending plans
* Planning and purchase of local packaging materials
* Product quality monitoring
* Technical advises to customers on uses and selection of right lubricating oils
* Lubricant stock movement monitoring.

SYSTEM SCIENCE CONSULTANT INC. (S.S.C)-TANZANIA (SEPT. - NOV.2001
Position: Project Assistant
Responsibilities:
* Working with experts in fisheries related technical, economic and social research issues
* Search and collecting information on various fisheries related activities as demanded by the master plan studies
* Computerizing all the survey data for the interim and final report
* Preparation and conduction of workshop for stakeholders in the entire fisheries sector.

KAHAMA MINING CORPORATION LTD-TANZANIA, SUBSIDIARY COMPANY OF BARRICK GOLD COMPANY (JUL. 2000 – JUN. 2001)
Position: Assistant supervisor
Responsibilities:
* Involved in plant start-up and commissioning
* Supervising junior plant operators to run plant
* Monitoring and controlling operating parameters
* Condition monitoring of equipment and machines and report to maintenance department

SKILLS
Computer literate and knowledgeable with:
* Programming with Turbo Pascal and FORTRAN.
* Microsoft Window based programs
* Optimas Image analyzing software

Membership to Professional Bodies:
Student member of the South African Institute of Chemical Engineers (SAIChE)

Publications
* Lameck, N.S., Moys, M.H., 2005. Proceedings of The Minerals Processing 2005 Conference, Cape Town, South Africa, pg SP16
* Lameck, N.S., Kiangi, K.K., Moys, M.H., 2006. Effects of Grinding Media Shapes on Load Behavior and Mill Power in a Dry Ball Mill. Minerals Engineering, 19, 1357-1361
* Lameck, N.S., Moys, M.H., 2006. Effects of Media Shape on Milling Kinetics Minerals Engineering, 19, 1377-1379

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 251 to 300 of 867)

Go to Search Parameters...

Brief Description

Heavy Duty Diesel Mechanic/Fitter. 12 years experience with Volvo trucks and buses, hard working reliable skilled diesel technician.

8 1/2 years experience in the U/G mining industry, majority of this time I have been diamond drilling but have experience in Supervising, Training and Longhole Production Drilling and associated mine support functions both in Australia and Zambia. Presently in WA but am willing to travel.

PROCESS OPERATOR/FIRE ASSAYER/SECURITY 1993-2001 OBJECTIVE: To obtain a position that utilizes the knowledge and experience that I have acquired.

HR/R Licence, Plant & Equipment Operator , GPS/GIS, Shot Firer, Crew Leader Fire,

Trade training, Supervising boilermaker workshops, Machinery operation and fixed plant operation. 3 years expatirate in Africa

Industrial Maintenance Technician/Electrician

Pipe fabrication, pipe fittings, layout, maintanence and servicing, assembling

Open Pit Mine Surveyor

maintenance millwright-28yrs. from trainee to maint. superintendent

Qualified Fitter, Turner, Welder. Experience with large fixed plant. Conveyors, hydraulics, pneumatics, large variety of pumps and processing equipment. Cpr and switchboard rescue trained. Elevated work platform ticket. Construction blue card.

lookin for a mining job willin to relocate

Managing Mine Resources, Maintenance Planning, Mine Start-Up,

My sckills cover a broad range of heavy equipment. Along with this I have made sure I have the safety skills needed to work in the Extreem Alaska enviroment.

C.A.W.I. PRESENTLY SEEKING C.W.I./BOILERMAKER FOREMAN

I am a process engineer with foundation in Chemical Engineer with keen interest in research, process design and optimization. I offer years of experience in research acquired through postgraduate (MSc) studies and in working environment.

Heavy Equipment Operator

Instrumentation Engineer.Vast experince in Instrumentation Field.SAP Knowledge.Strong knowledge of PROFIBUS PA + DP.

A1 grade machinist working on all machines in timber indust,tool setter and sharpener m/c setter also,4 year trained app city and guild london institute, driven most front loaders but no tickets as all in saw mills when the driver was working on other m/c. also work on contract for australia post .

5 Years with sandvik mining & construction s.a.2 Years at sandvik field services.Have been promoted as senior technician 10 months ago.qualified in the south african air force as a aircraft mechanic on the puma helicopter.i specialise in ejc 115-axera lp drill rigs.this is my passion.

Caterpillar diesel mechanic.

Worked in the mining industry for 8 years (I love my work). I am a very keen hard worker. I am currently looking for a job that pays very well so i can set myself up financially.

Electrician 309A

Seventeen yrs mining exp all equipment. Specialty dragline up to and presently operating 4600 Manatowak. Eight yrs foreman-certified Ohio.

I have 2 1/2 years experience working underground. I can operate a Scoop, Mucker, Jackleg Drill, and a Belt man. I also have a certification as a EMT-M and a Underground Shot Firer.

New born driller ready to do some footage , or good constuction worker

Experienced heavy equipment operator

QualificationsI have worked in the repair related field for over 23 years. I owned and ran a repair shop for the last 13 years working on both gas and diesel repairs. I managed between 10 to 15 employees year round as well as the day to day operations of the business.

• Qualified Metallurgical & Materials Engineer with 12 years of Proven Capabilities in Research & Development, this includes, Product Development, Application Development, Process Improvement, Energy Conservation, Quality Improvement, Materials Testing, Characterization & Customer Complaint Investi

Seeking Millwright Apprenticeship - present skills - plumbing and heating, carpentry, general labour, trained operator - diesel clean-burn incinerator,maintain, trouble shoot assess problems and work in conjunction with Millwright and Welders

10 years of mining experience, started as mechanic worked my way up yo master mechanic,then to Maintenance Superintendent, I have been project Supertindendent as well.

I am a journeyman plumber/gasfitter with 22 years experience, with 5 years experience as a facilities maintenance planner. I am looking for variety in my field of experience.

Was responsible for maintaining city landfill. Duties included but was not limited to: loaded self with 980G Front Loader (FL) and hauled/moved bark with a 10 yard dump truck to the landfill then spread, shaped and compacted with a D9C and D6C Dozer.

MacLean Bolter operator

Project Engineer - Antenna System, Installation Commisioning for Antenna, Product Approvals from Customer for supplies, Tender Preperation

I would like to utilize my skills as a beltman and to learn more in the coal mining business.

MSc Mineral Production and Engineering Management, BSc Metallurgical Engin.: 7 yrs exp., Excellent communication , interpersonal and report writing skills, good supervisory and problem solving skills, can work under pressure with minimum supervision, quick learner, hard worker and self motivated

boilermaker with fitting and welding experience in mining ,construction and hydraulics

Self-motivated, multi-skilled project manager & technical consultant with experience of a wide range of R&D and commercial based project work at SMT level. P&L responsibility for multi-million £ technical projects. Qualifications include BSc(Hons) Applied Physics, HNC Elect & Electronic Eng.

20+ yrs experience surface and DTH

Fully trained Mechanic in Petrol and Diesel engine repairs in all aspects of diagnositc and repair procedures. Working on all types of Heavy Equipment and Plant Equipment over the years developing myself in all areas of the service and maintenance section.

Driver, heavy equipment transport, water well rigs(Schramm Rotory) Matinance Michanic, Road construction,

With 15 years ex-pat experience, I am a well liked individual who can come into any situation and be a team player. Terrific people skills are an asset, which I possess. Welder/ fabrication and repairing heavy equipment from the frozen vastness of Antarctica to Greenland, along with Qatar.

EXPERIENCED HEALTH/MEDICAL PHYSICIST-ENGINEER-SCIENTIST

Mining Engineer with practical underground metals mining experience

Crane specialist. Heavy duty mechanic, mobile crane operator, trade licences. Towercrane ticket, and presently apprenticing as milwright to further my skills. Operate and repair many makes models of hoisting equipment. Rigging, inspection, supervision skills + more 20yrs exp with industry leaders

Registered Electrician with 20 years expirience trained in gas and electric arc welding, Basic First Aid, Lathe operation, Certificate in Computer Technology and two yearly Cardio Pulmonary Resusation and Saftey training for Electrical licence

Motivated, energetic, pro-active, confident go getter committed and thriving on challenges. Always striving to keep abreast with latest technological research anddevelopment. Quick learner with an eagerness for supplementary enlightenment. Strong administrative, technical and interpersonal and skil

Heavy duty auto eletrician, 18 years expat Caterpillar dealership experience,work includes pipelines and mines.

Years of experience in security and operation of heavy equipment and all types of motorized equipment

Mining, Refining operational experience. Proven Leadership skills, Mechanical background, Strong change management skills, Energetic & positive attitude.

1 2 3 4 5 [ 6 ] 7 8 9 10 11 12 13 14 15 16 17 18

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out