Resume - My experience includes the Superintendent level managing maintenance crews for a...

Misco Jobs

Resume #67950

CONTACT INFORMATION:
View contact information...

CAREER EXPERIENCE:

VAL Goro Nickel

Duties
* Currently employed with the Goro Nickel Project
With the Central Maintenance Department developing training procedures; maintenance strategy ; developing all standard procedures and implementing Reliability Based Maintenance System; Procurement of all large fixed shop equipment

Xstrata Nickel. Sudbury Smelter Operations

Duties:
*
* Superintendent Maintenance / Site ShutdownCoordinator
* Central Control Room Operating/ Supervisor
* Relief General Supervisor Maintenance
* Maintenance Supervisor
* Maintenance Planner
* Shutdown Coordinator
* JHSC member/ Skilled trades member
* Industrial Millwright Mechanic/Construction Millwright
* C.W.B. Welder 4 Position SMAW, General Machinist

Ford Electronics Manufacturing Ltd.

Duties:
* Industrial Millwright Mechanic/Water system Mechanic
* Construction Millwright
* General Machinist
* Robotics Programmer

General Motors of Canada Ltd.

Duties:

* Industrial Millwright
* Construction Millwright
* Production Supervisor

Emerson Electric /Browning Ltd.

Duties:

* General Machinist
* Production Supervisor

EDUCATION:
2007: French Advanced Level 3
2007: Enrolled in French Advanced #2 level
2007: Involved in Computer and Maintenance System switch to SAP
2006: Enrolled in French Advanced #1 level
2006: Project Management Skills
2006: French Intermediate #3 level
2005: French Intermediate #2 level
2005: French Intermediate #1 level, Second Language
2005: French Beginner #3 level, Second Language
2004: Accounting And Finance for Maintenance Managers
2004: French Beginner #1 and #2 Second Language, and Level
#1 Conversational French
2004: STOP safety program Falconbridge Ltd.
2004: Six Sigma Project Management "Green Belt"/ Falconbridge Ltd.
2003: 3M Boxing Coach Certification. Theory, Practical and Technical.
2003: B44 Regulations for Elevators/ Hoists
1998: Welding supervisor
1997: Hoisting and Rigging for Industrial Locations
1993: Omron PLC Programming
1991: Hoisting and Rigging central location General Motors
1990: Durham College Module "Pump repair"
1989: Durham College Module "Industrial Pneumatics"
1988: Ministry of Education MFM3AB,MRF5AA,TDG2GB( all advanced Mathematics)
1987: Ministry of Education MFM4AB( Drafting)
1977: Uxbridge Secondary School Grade 12 completed/ graduated

Training Record

2007 People Soft Salary Tracking
2007 Ellipse Maintenance System
2005: Advanced First Aid / CPR level A
2004: Six Sigma Green Belt Internal Training
2004: Environmental Management Systems ISO-14001
2004: Handling/Storage of Hazardous materials
2004 Spill Response and reporting
2004: Management of Fuel consumption
2004: DUPONT STOP safety program
2003: Storage and Disposal of Hazardous materials
2002: CWB welding supervisor
2001: Confined Space Rescuer and team member
2001: SCBA Hi pressure breathing apparatus
1998: Serious Incident / Accident Investigation and reporting
1998: Confined Space entry and procedures
1998: Surface Plant Emergency Response and Evacuation
1998: Ontario Health and Safety Regulations
1998: Fire and Emergency Procedures
1998: Job Instructor Training
1998: Internal Responsibility System
1998: Due Diligence

SPECIAL SKILLS:

Completely familiar with acquisitions and the quoting process of large equipment, both mobile and fixed.

Development of Standard Job Procedures

Implementation of Reliability Based Maintenance System

CMMS SAP and Ellipse Training

Initiated the development of the Reliability Team/Process at the Smelter

Joint Health and Safety Member 2003

Smelter Retrieval Team Member

Project Management and commissioning.

Shutdown Coordination / managing at 1st line level as well as General Supervisor.

Shutdown Maintenance Planning and Purchasing.

Familiar with Preventative Maintenance Programs and associated software.

Six Sigma Theology and Methodology.

Championed "Key Performance Indicator" section of progressive maintenance at Falconbridge Ltd.

Operation of a Ferronickel Smelting Plant as a Control Room Supervisor.

Experience with automated machinery, mainly Hirata direct drive robots, and automated Hydraulic Equipment.

Familiar with Omron PLC, fibre optic devices, and DC controls.

Proficient with software such as Microsoft Project, Power Point, Excel and Word

PERSONAL INFORMATION:

Contact Phone # 705-525-1587
Contact Work # 705-693-2761 ext 3892
Contact Email gomoore@sudbury.xstratanickel.ca

INTERESTS:
Classical Paintings and compositions
Reading and Cultural Exchange
Coach Boxing and Martial Arts.
Outdoor activities including boating, hiking, and personal fitness.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 351 to 400 of 868)

Go to Search Parameters...

Brief Description

My job is too repair stoppers drills jacklegs drills sandpippers pumps, double diaphragm pumps, & others any small compressed air machine I can fix screen pushers, airlegs .

Underground hard rock mining

Load overburden, split coal, push in a shop

Hard worker pursuing a career in the mining industry. Experienced in heavy equipment repair. Mechanical aptitude and willing to learn.

Transportation professional seeks new challenge. Will consider entry level or other qualified offers.

Trade qualifed Vehicle mechanic, experience as a Heavy Diesel fitter/Hydraulics/Mining Equipment etc.

I have a lot of experience in many different industries. I am a fast learner and a hard worker. I have good organizational and management skills. My employers and fellow employees consider me a pleasure to be around and easy work with.

Electrician with over 20 years experience

-1 yr: Business Consult. in Comm. Futures Trading for analysis commodity markets -1 yr & 2 mths: implement, maintain database & filing system -2 yrs: Expl. Geologist working in the field at remote locations, produce maps,maintain database; Sound knowledge of safety policies

Managing, organising and participating in geological field studies, drilling and geological testing programAnalysing geological, geochemical and geophysical survey data, well logs and other test results, maps, notes and cross sections, core samples, drill cuttings and rock samples

Manage 20 maintenance personel on repair of equipment and building ,order arts and maintain inventory, prioritize and issue work orders.

Professional Qualifications: BE Sales & Marketing Open, City & Guilds Mechanical Technician,ONC Pipe Maintenance & Instillation,NVQ Level I, II, III Quality Auditing,Diploma supervisory management Team Leadership I & II,

Timed served Diesel mechanic with three years post trade experence. Specialising in heavy earth moving equipment.

Seasoned Professional with 14 Plus years varied experience in the Geology Field. Relocation possible.

Hard worker and can run all heavy equipment and maintence

Project Management / Inspection / Procurement / Quality Assurance

Diesel mechanic/ Fitter 20 years mining experience

To abtain a position as a technition, or maintenance employee. Skills are mostly Mechanical and Recovery for wheeled vehicle, Heavy and light. Also over 6 years in the US Military

Find a job in the mining industry to continue using the broad knowledge of mining techniques that I have; and learn new ones.

Journeyman Electrician Red Seal Endorsement

Heavy Equipment / Crane Mechanic / Welder

Mechanic; Hydraulic Tech; Crane Operator - Mechanic; Detroit & Allisson Transmission Mechanic

I've been around heavy equipment since I was young, working on cash crop farms and then construction equipment like lift trucks, dozers and pay loaders , and now want to re-enter the work field in what I know best and enjoy the most.

Looking to start my career in the mining industry as a 2nd year heavy duty mechanic in the summer of 2004. I will be graduating from Assinibione Community College with my level 2 certificate in heavy duty, farm, and transport.

I have been working in the mining industry for the past 29 years. I have gained a large amount of experience using several types of mining equipment over the years. I have been commended on my attention to detail, safe work practices and team work. I know I would be an asset to your company.

Experienced offshore Client Representative and qualified Hydrographic surveyor; with Master's ticket, NEBOSH, MCSE .

Electrician - Certified

Seeking a full time position as a mid level or journeyman welder.

Seeking employment in open pit or quarry work as a heavy duty repairman

A technocrat with proven experience in the filelds of Marketing and business development, general management of multinational Industrerial valves manufacturing organizationas with an experince of 14 years.

Mechanical Fitter, Mining Experience, Various Machinery Tickets.

* PROJECT / PROGRAM MANAGEMENT * OPERATIONS * ENGINEERING *

Been supervisor of a small rock crusher for over 2 years. Worked in mining for 4 years; experience: loader, backhoe, dozer and a little trackheo, and a jawed crusher. Perform maintance and upkeep of plant

Firefighter, Search and Rescue Instructor, Safety Instructor, First Aid Instructor, Emergency Response Coordinator, Team Leader, Crew Chief,

Operator - dozer,loader, excavator, shovel, backhoe, drill I can operate large or small equipment I have machinest experience I have been general manager of surface mine in charge of all operations currently operate my own equipment in excavating business

3) One year course in operation and maintenance of Heavy Earth moving Hydraulic equipment like Bulldozers. Pavers JCB sensor paver etc. experience in operation and maintenance of bulldozers J.C.B. writgen surface miners sensor paver etc.

Graduate Mining engineer

I am a machinist by trade, got into service tech., then field machining and enjoyed it.

My experience includes the Superintendent level managing maintenance crews for a nickle smelter. I have a trades background of 25 years which includes millwright; welding and machinist. I am currently working for a large Nickel Project overseas and have extensive experience with RCM.

MECHANIC/WELDER/GENERAL MAINTENANCE & REPAIRS

Journeyman Electrician

N1,N2,Volvo Electrics,Volvo Backhoeloader BL70/71-Powerscreen Service Course-4wk Training Diesel Pump Room - 4 wk training Auto Electrical-Trade Recognition Assessment Test

Looking for Heavy Industrial Fitter/Mechanic type role - me with 5years experience - worked on Caterpillar, Komatsu, Hitachi, O.K etc. I am seeking employment in QLD, NSW or oversea, available to start at the end of this week and willing to relocate worldwide. Committed, reliable, and ready to go.

Looking for management position in mineral (gold and precious metals) exploration and environmental engineering consulting.

Previous warehouse work..good hard worker ,fast learner

A proactive leader with extensive reliability centered maintenance management and hands-on experience in the repair, overhaul and troubleshooting of mobile equipment, initiate change and reengineering of quality improvement processes while maintaining a positive, safe and productive environment.

Multi skilled and flexable. Highly experienced mechanical fitter presently contracted to ITT Systems Division, Kuwait. More than 12 years overseas experience, working in Europe and the Middle East.

12 + Years HSE experience, HSE professional Tech IOSH; NEBOSH & (USA) NASP safety certification (Equiv DIP)

welding of pressure/vacuum vessels, fabrication of heavy plant and machienery

Supervision, planning, scheduling, coordination, maintenance (prevantive & breakdown), budgeting/forecasting, optimum inventory management, resource development & deployment, utilities etc.

1 2 3 4 5 6 7 [ 8 ] 9 10 11 12 13 14 15 16 17 18

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out