Resume - Experienced chemist with over ten years working in EOR/IOR projects associated t...

Misco Jobs

Resume #68383

CONTACT INFORMATION:
View contact information...

KEY COMPETENCIES

*Petroleum Laboratory management
*Setting up, adjusting and operating laboratory equipments
*Control processes in laboratory and bench scale
*Special and conventional core analysis. Coreflooding Studies
*Water/Gas and chemical flooding to IOR/EOR projects.
*Formation Damage and Heavy oil enhancing
*Strong Knowledge of Organic Chemistry
*Chemical formulations development
*Physical chemistry of polymers & surfactants
*Technical support in onshore/offshore operations
*Field/plant production fluids Samplings
*Handling/Treatment/Separation of oil/water samples.
*Knowledge of standards ISO-9000/ISO-14000
*Promotion of chemical products.
*QC/ Chemical analysis by ASTM/API Methods, UV-Visible spectrometry and HPLC.

PROFESIONAL EXPERIENCE

2005 –2007 (Present) Neotechnology, C.A, Venezuela – Germany
Laboratory & Field Chemist

* Coordinate and perform laboratory studies to evaluate new technologies to enhance oil & gas production. Evaluation of chemical formulations to sand control involving the following technical parameters: Porosity, Permeability retention, pore volume optimization, injection rate, proppant types, temperatures, pore pressure, initial fluid saturation, confinement pressure, fluids compatibility in aqueous and non aqueous systems, chemical preflush, among others. Treatment and separation of oil water samples. Fluids rheology
* Develop rock specimens under P/T controlled conditions to evaluate curing time, type of chemical formulations and evaluate mechanical properties through UCS and PLT.
* Evaluate gelling time in static and dynamic conditions using different starters of polymerization.
* Design and set up equipment to evaluate different processes at reservoir conditions. Maintenance and calibration of laboratory equipments. Calibration gauges, transducers, high-pressure syringe pumps.
* Serve as a sale representative promoting chemical products
* Design of methodologies -standard operating procedures (SOPs)-state of the art studies

2003/2005 Universidad Central de Venezuela, Petroleum engineering faculty.
Technical Support Chemist

* Responsible for the reactivation of the PVT laboratory. Maintenance and calibration of PVT equipments: Blind liquid phase PVT Cell and volatile/condensate fluids cell. (Compressibility up to 8000 psi). Calibration of rolling ball and Brookfield viscosimeters
* Served as technical support to undergraduate students & technicians in the reservoir rock and fluid properties laboratories from petroleum engineering faculty. Water/sediments, air/water permeability, porosity, fluids saturation, capillary pressure and ASTM/API methods.
* Worked in an experimental methodology to eliminate phenol from phenolic wastewater effluents of a naftenic acid plant by a laboratory ozonation system.

1989/2003 Research Centre of PDVSA-INTEVEP, Venezuela:
Advanced professional II; Activity Leader for La Salina project and Professional I, Laboratory and activity coordinator for Lagomar project. Offshore projects. 1996/2002,

* Designed, organized and performed laboratory activities to establish alkali-surfactant-polymer (ASP) formulations to the reservoirs LL-03 and VLA 6/9/21, involving fluids characterization, conventional and special core studies. Fluids studies involved: phase behavior to oil-water-surfactant systems, optimum polymer concentration, critical micelar concentration and ultra low interfacial tension to surfactants. Rheological behavior, molecular weight effects, thermal stability (bottle tests, anaerobic chamber), fluids compatibility, solubility, interfacial phenomena and compatibility of polyelectrolytes and additives in formation, injection and soft water. Evaluated Antiscalants. Conducted Coretestings and Fluid-rock interactions tests: chemical retention, Absolute and relative permeability, capillary pressure, wettability, porosity, pore volume and oil recovery.
* Studied the surfactant/polymer interactions by rheology and tensiometry.
* Contributed to the technological risk analysis for an ASP full field application and worked as a part of a team to generate a pilot design to determine the effect of gas lift on the produced fluids and the effect of the transport of injected blends on the viscosity at the experimental well "CEPRO"
* Coordinated and oversaw the quality control and preparation of whole slug of ASP injected in the well 1325, during the pilot test "SWCT" to evaluate the efficiency of ASP process in Lagomar field (offshore). On-site inspection of the barge facilities to evaluate mixers and tanks integrity. Installation of equipments required to monitor and ensure the quality of the polymer and surfactant blends, previous the pilot test
* Performed water/oil separation in the field using portable separator and demulsifiers. Oil and water (Brine) tests by ASTM, API and SMWW methods.
* Analyzed asphaltenes content, water and sediment content in crude oil by (ASTM 4007-02, API MPMS Ch. 10.3/10.2), density, specific and API gravity, carbonates and bicarbonates in brines (Alkalinity), chlorides, total dissolved and total suspended solids in brines.
* Served as a technical support in project "Exploitation and unconventional uses of heavy and extra heavy oils" to demonstrate the cracking and hydrogenation of heavy oil by electrochemical treatment.
* Technical support during the injection and sampling of tracers in the Lagomar field.
* Supported the preparation, mixed and injection of emulsions with heavy oil at the FN-2 well, Furrial field.

Associated Research Technician III (Field technician) to both Projects "Support to the Integrated Studies to the fields: Centrolago (offshore) and El Furrial(onshore)". 1992/1996

* Investigated the fluid-fluid compatibility and fluid-rock compatibility through filtration tests and fines migration studies (critical velocity) on oil free and aged cores and helped scale data to field condition.
* Carried out reactivity tests of heavy oil to activate natural surfactants.
* Sampled oil-water to extract chemical and radioactive tracers to monitor water breakthrough in production wells and sampled H2S at wells of the Furrial field. Designed and improved the laboratory facilities for treatment and separation of oil/water samples containing tracers using demulsifiers, ultrasound and electrical treatment. Collaborated with the risk analysis using the methodology "What IF" to use this process in laboratory.
* Sampled light oil with needles on well head and well pipe (HP&HT) to geochemistry analysis.
* Selected and evaluated HT resistant polymers and its blends with alkali-surfactant for HT reservoirs.

Principal Research Technician, Reservoir Technology Department, 1989/1992

* Set up systems with different types of porous media and handled the tomography technique to evaluate the distribution of fluids inside the cores.
* Performed extra-heavy and heavy oil thermal treatment tests using hydrogen donors, methane, water and steam in static & dynamic conditions. Evaluated the steam injection with solvents on heavy crude oil. Characterized these samples by density, °API, viscosity and thermal analysis.
* Conducted the preparation/injection of polymer/biopolymer solutions in reservoir cores to evaluate flow parameters; injectivity, resistance factor (RF) residual resistance factor (RRF), brine injection, oil recovery and polymer retention, monitoring polymer concentrations by UV-Visible spectrometry and HPLC.

EDUCATION
2000 BS in Chemistry (Technology)
Universidad Central de Venezuela, Caracas, Venezuela

1986 Associated degree in Chemistry
University Institute of Technology Capital Region, Caracas, Venezuela

OTHERS SKILLS
* Microsoft Word, Microsoft PowerPoint, Microsoft Excel, Basic reservoir simulation with STARS
* Languages: Spanish: Mother Tongue/English: Spoken and Written (High Intermediate Level)
* Supervision of small group of professionals and students in laboratory and field work
* Analysis, treatment and purification of gold of mines and jewels. Goal-oriented/Fast learner/Innovative
* Data/results interpretation and preparation of progress/final reports
* International exposure during technical visit to partners in North America and Europe
* Co-author of international technical publications in chemical flooding (EOR)

NOTICE PERIOD: One month CURRENT LOCATION: Venezuela

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 451 to 500 of 864)

Go to Search Parameters...

Brief Description

troubleshot and repaired diesel engines operated heavy equipment and have done concrete and iron work

Seeking a Management position where my considerable experience and knowledge of Construction civil estimating and project management that can be fully utilized to help drive employer profit margins and complete contracts on time.

Free! Instrument Specialist with over 13 yrs experience in both domestic and overseas facilities.

Around 20 years experience in all QA/QC activities up to final certification of equipment and projects catering to Oil & Gas (Production Platforms, Refinery, Petrochemical, Fertilizer), Power plants (Nuclear & Thermal) and Shipbuilding.

By having multi-discipline skill; I have 21years of combine technical work experience in Project Management/ Consultant/ Coordinator/ Advisor/ Engineering/ Fabrication/ Construction/ Erection/ Installation & Maintenance work on both offshore & onshore.

20 + Years Experience / Supervisor / Heavy Equipment / Haul Trucks / Will Relocate

Outside Plant Technian, Bell System Trained, College Degree, AVAYA ACS PBX READY, copper/fiber palnt install/test/termination, Cat 5 and 6 as well as paging, cameras and home theater seeks contract/fulltime work in Middle East or almost anywhere in the world..

Mechanical Drafting and knowledge in 5 Axis CNC programming and machine operation.

licensed automotive technician(redseal endorsement)other skills, welding, autobody, automotive electrical

I have 12 years of experience working all aspects of Supply Warehouse Logistics to include warehouse up to management.

I have a Certificate 3 in Electrical Engineering and Level 2 in PLC. I have had 11 years experience in the electrical field, predominantly industrial, however I have also had experience in the commercial, fire, mining Including hazardous areas and emergency lighting industries.

To obtain a supervisory / team leader position in the diesel mechanic field with an actively growing company in the oil & gas, trucking, marine or mining industries. I also desire to apply my supervisory skills to improve company profitability while enhancing customer and employee satisfaction and

Maintenace/ Inspection Reliabilty and Construction QA/QC

Procurement, Materials and Logistics Manager (SCM): 20 years international experience in gas & oil and energy projects.

Pabx installation engineer technician radio telecommunications telecoms

Service Support/ Product Support Heavy Equipment Maintenance Manager

Industrial Marketing & Sales; Mining; Explosives; Business Strategy; CRM; BPR

I have been working on milling machines, lathe machines, boring machines, tool and cutter grinders, surface grinders, bench fitting and using hand tools and machine tools to manufacture, repair and produce parts

Completed WV 80 hour Underground Coal Mining Training and have class 05 underground apprentice certificate. I also hold Electrician apprentice license

Electrical and Instrument system design and commissioning, Project Engineering, Control and Automation Engineering. I am degree qualified in Electrical and Instruments

Millwright Journeyman

Well experienced as an Electrical Field Maintenance and Construction QA/QC & Foreman in Oil and Gas Facilities, Refineries, Airport and Mining Industries with a demonstrated ability to lead Maintenance and Construction Projects.

MSC chemistry , QA, QC, R&D, ISO, GMP, GLP, Business promotion

Over 20 years Quality Management and Supervision experience in Heavy Engineering Construction Industry

I am interested in a Supervisor / Equipment Operations or Training position. I am a hard working, highly motivated team player, with over 25 years experience in heavy industrial fields, and 20 years of supervisory experience with increasing responsibilities.

Electrical

Registered EU Mech. Eng w/ 15 years experience in the oil and gas environment - North America, North Africa, Middle East,. High-energy individual whose best attribute is my ability to work well with other people.

Welding and electrical and management and mining class 32 hour certified fork lift operator

Blaster with contracting experience.

Piping and Welding Supervisor QA

SKILLS SUMMARY Manager, with strong electrical and mechanical background, 15 yrs construction and maintenance electrical experience, 9 years mechanical experience, performed purchasing and business development skills,. Proficient in Microsoft Word, Excel,

I have over 27 years in mechanical repairs

Siemens , Allen Bradley PLC programming, Honeywell TDC 2000 and Foxboro DCS programming and troubleshooting. Profibus Certified installer and troubleshooting. Project management. Wonderware InTouch and Citech SCADA systems. Excellent troubleshooting skills.

Lean Master and Master Black belt instructor, facilitator and coach currently with BMG (Breakthrough Managemnt Group). Main function currently as Six Sigma and lean account executive responsable for the deploymemnt of Lean and Six Sigma initatives with various local and international orgenisations.

Dirt Superintendent / Foreman/ Heavy Equipment Operator with 25 years experience.

MSc Mining geology student graduating this summer. Looking for a summer project in association with a company, preferrably in exploration, hopefully leading to employment. Interests are in Gold and Ni-Cu-PGE exploration. Extensive field experience in remote areas.

Fitter, Turner, Machinist, Planner, Scheduler

Supervision construction commissioning startup air separation ,heavy oil etc.

I have 20 yrs experience as a surveyor. I was trained in the U.S. Army as a Field Artillery Surveyor. I have experience on highrise buildigs and sub-divisions. I have surveyed oil and gas pipelines and power line routes. I also worked on marinas providing layout and volume reports.

Strategizing and implementing plans to achieve Production targets in consultation with relevant stake holders in a safe manner. • Scheduling Mining, Ancillary Equipments and Labor to achieve Production and Safety Targets. Ensure proper and efficient utilization of all equipment

General Safety & Surface mines training, NORCAT, Sudbury, ON

Heavy Duty Diesel Technician/Fitter, service field experience, two years supervising/consulting on mining equipment, 10 yrs crane experience (tadano certified), class 1 driver's lisence (air brake endorsement)

Fast track professional, successful in field of instrument, control and electrical for installation, commissioning, repairing, maintenance, calibration and modifications of Electronic, Pneumatic, Safety, Analytic instruments. and control systems.

Experienced chemist with over ten years working in EOR/IOR projects associated to laboratory and field to the oil & Gas industry in Venezuela. Coordinated and used different analytical equipments, methodologies and facilities, following standard procedures of laboratories and operations

Mining Engineering with MBA

QUALIFICATIONS/LICENSES: Full Drivers License, Class 2 Truck License, 'Site Safe' endorsement, 'Wheels, Tracks & Rollers' Drivers License & Endorsement (Unit Standards 16701, 16702, 16703). Skills Summary: Digger Operator, Bobcat Operator, Roller, Truck Driver (4 wheeler), Concrete Laying,

Miner/trainer/shift boss assessor

I am trained in the mechanics and operation of back hoe, bobcat, jack hammer, dumptruck, forklift, sissor lift, crane(boom truck), delimber, and rock crusher. I also have skills with tack welding, drafting and construction.

Recently graduated from 4yr BA(Hons) in Geology, looking for FIFO work in any country, flying to/from UK/Ireland. Course & dissertation work provided some fieldwork experience. French to higher Leaving Cert level. Please see personal statement in resume for more details.

I am a 3rd year heavy duty mechanic i have worked on all sorts of equipment from electric gorman rupp pumps to desiel engine huydraulicly actuated concrete pums,air compressors ,loaders,cement mixer trucks,centerfuges , pannels,pipehaulers, forklifts

1 2 3 4 5 6 7 8 9 [ 10 ] 11 12 13 14 15 16 17 18

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out