Resume - FELONY conviction disclosure! Experienced metrologist, industrial electronics re...

Misco Jobs

Resume #69577

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS
Significant specialized military training and extensive real world experience have resulted in excellent qualifications for calibration, test equipment, industrial electronics and computer network maintenance and repair related positions within the private sector.

Have possessed a Secret Security Clearance, and have received military commendations for outstanding performance of duties. Dedicated, hard-working professional with demonstrated technical abilities, attention to detail and solid communication skills enhancing interpersonal relationships with supervisors, peers, and subordinates alike. Anxious to become affiliated with a progressive firm capable of utilizing previous background to mutual advantage.

PROFESSIONAL EXPERIENCE

RESIDENTIAL CONSTRUCTION WITH VARIOUS CONTRACTORS 11/03 - PRESENT
Wilmington, N.C. area
Currently working for past year with local subcontractor on all phases of remodeling and addition. Started out installing seamless gutter, did some production framing, spent some time in siding and exterior trim, installed some custom stairs, and a little bit of roofing.

INDUSTRIAL ELECTRONIC SERVICE/REPAIR/CALIBRATION/ETC. 1/94 – 10/03
The Triad, N.C. area
During this period I performed just about every known maintenance action on just about every known piece of industrial electronics and test equipment for four different repair houses in the greater Triad area. A list of equipment and manufacturers I've supported would be simply exhaustive. While the majority of the work was in-house bench repair I also performed on-site factory field service calls.

RESIDENTIAL CONSTRUCTION WITH VARIOUS CONTRACTORS 1/93-12/93
Wilmington, N.C. area
General residential construction, framing, roofing.

PRECISION MEASURING EQUIPMENT LABORATORY TECHNICIAN 1/91-6/92
Incirlik, Turkey for Vinnell, Brown & Root
Performed as metrology technical representative for Vinnel, Brown, & Root in Air Force PMEL in support of Rapier missile system contract overseas. Overhauled, modified, repaired, calibrated, and certified test, measurement, and diagnostic equipment(TMDE), including laboratory standards and automatic test equipment. Assisted technicians and users in troubleshooting, testing, and maintaining TMDE. Used TMDE to perform voltage, current, power, impedance, frequency, temperature, and physical/dimensional measurements.

NETWORK INSTALLER/SYSTEMS ANALYST 5/88-12/90
Oklahoma City, OK based for Network Solutions Inc.
Performed LAN integration involving the installation and debugging of network cards with TCP/IP based software into IBM compatible PC's. Installed and troubleshot IEEE 802.3 broadband and baseband LAN hardware including cabling, splicing, amplifiers, equalizers, modems, bridges, and translators at various AFRES locations.

CALIBRATION/SERVICE TECHNICIAN 7/87-12/87
Huntington Beach, CA for ElectroMetrology Corp.
Performed calibration/repair on electronic, electrical, and physical test equipment from various manufacturers. Included on-site work.

JET ENGINE TEST CELL SERVICE TECHNICIAN 10/86-6/87
Santa Ana, CA for Dynalectron Corp.
Troubleshot, overhauled, repaired, and maintained electronic, electrical, hydraulic, and mechanical equipment in support of A4, F4, F18, and C130 aircraft engine, hydraulic, and instrument test stands throughout the 3rd MAW.

PRECISION MEASURING EQUIPMENT SPECIALIST 1983-1986
Iwakuni, Japan and El Toro, CA for United States Marine Corps
Primarily involved in the calibration/repair of precision measuring equipment. Prepared routine reports on the results. Other responsibilities included determining the nature of calibration/repair to be performed in accordance with user demands, current procedures and design specifications, as well as ordering replacement parts, accessories or change kits, through applicable publications and supply documents.
Held collateral duties of Technical Publications Librarian in charge of maintenance of over 900 technical publications using database software to maintain inventory and Test Equipment NCO, responsible for lab standard maintenance and timely calibration. Served as Night Crew Supervisor as required.
Awarded Naval Sea Service and Good Conduct medals, Meritorious Promotion to Lance Corporal for PMEL school honor graduate, Meritorious Mast for outstanding performance as TPL NCO, and Honorable Discharge.

EDUCATIONAL BACKGROUND

Maud High School; Maud, OK Diploma 1982
Basic Electronics and Electricity; NAS Memphis, Millington, TN 1983 (honor grad)
Precision Measuring Equipment Laboratories; Lowry AFB, Denver, CO 1983 (honor grad)

HOBBY

I am an avid Linux enthusiast. A programmer gave me a Redhat 5.? disk 7-8 years ago and I have been poking at OSS since and dumped Microsoft several years ago. I can install, operate, and network most distributions available. I would welcome an opportunity to acquire some programming skills as it is the one area I feel limited in.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 551 to 600 of 868)

Go to Search Parameters...

Brief Description

I am MSHA certified. I have experience crushing and screening. I can operate loaders, dozers, scrapers, excavators and I have my CDL.

Eight (8) years experience as heavy equipment operator local and overseas

Mark up Leading hand, Blast crew member, Westrain Plant Operator Training Course

I am working a year now on trucks and cars and want to do my apprenticeship as a diesel machanic but have no place that can help me

I'm a very fast learner and I'm mechanicallly inclined and have the ability to be a dedicated employe

Qualified health and security manager. Experienced in leading H&S supervisor on oil and gas plants or on remote site. Also have experience on construction site. Implementation of H&S programs, accidents and incidents investigation.

Journeyed Industrial Electrician

PLANNER SMELTER

certificate of proficiency in general construction carpentry[framework/formwork infastructers/ concrete finishing/ steel fixing

Bachelor of Engineering (Electronics & Communication) ,A.I.V.,A.M.I.E.

I am an Instrumentation Technician and Instrument/gas fitter with oil,gas, and industrial experience. Skills: AC/DC generator, chemical injection, I&C, PLC, panel tech, compressor, automation, integration, etc.

7.5 Technical experience, guidance and command in all analytical and environmental based activities, services, management and techniques.

Heavy Equipment Operator (Certified)

I did both undergrad and master's in mechanical engineering with broad range of experiance both in mechanical engineering along with IT

My 19 years of experience reflect 13 years of project detailed engineering as a Control & Instrumentation Engineer and 4 years in maintenance and upgrade projects in a reliability based environment, applying amongst other the following typical standards and practices: ANSI, IEC, BSA, DIN, API

MSHA Certified, 5+ years construction trade experience, experienced heavy equipment operator, bilingual (spanish/english)

Installation, calibration and maintanence of mudlogging sensors. Entire Mulogging services, drill cutting collection, identification and description, identification of over pressure zones

Instrumentation project management/Instrumentation designer

Working experience - 16 years & 3 months. Highly skilled, experienced, expertise and knowledge as a driller

Millwright/Welder Maintenance

Plant operations supervisor / trainer, remote overseas locations

Desired employment / Occupational field Financial & Economic / Project Analyst

FELONY conviction disclosure! Experienced metrologist, industrial electronics repair, computer/network systems analyst looking to reenter tech industry.

Time served mechanical fitter - city and guilds

25 yrs Heavy diesel mechanic in Construction and Pipeline

Senior Site Executive Hard Rock Quarry Manager, Mine Supervisor, Operator Trainer Assessor, Multi Skilled Plant Operator

Multi-skilled operator, decision making

Experinces in welding, mechanical and Rig at an Oil Company, CALTEX. With the latest position as Coordinator. I need a job weets wiith my experiences.

Ph.D. in materials science and engineering, four year experience in teaching, five year experience in working in various industries. Fields of specialty; corrosion, coating, materials selection

Principal & Project Engineer experienced working Oil & Gas and Industrial electrical projects.

Municipality Of Saanich- Solid Waste Services/ General Labour

I am skilled in the planning, scheduling and initiating tasks for production, repair, and preventive maintenance. Lean manufacturing skills including inventory of finished goods, spare parts, and raw materials.

Managementskills NQF level 6,NQF level 4, operationalskills NQF level6,Facilitationskills,trainingskills,computerskills

Automation Engineer

I have worked in the mining industry for the last 15 years. I have performed several duties in the operating and maintenance field. As well as supervised crews and trained new employees.

Logistics, Technology, Transport and Management Professional

I have Masters Degree in Geology with experience in Coal Exploration.

I am a safe and productive Miner with ten years of increasing experience

Over 14 years of experience with various reputed organizations as Instrumentation & Control Engineer with proven success in the Erection, Installation, commissioning & maintenece of a wide spectrum of Instruments and Process Automation Systems as Yokogawa DCS systems (Centum CS3000, CS3000,

Fitter and Machanist, Rigger, Dogman, JLG, Welding coded, Mining exp (Awarded Apprentice)

My name is A. Pradeep Kumar, I have completed my post graduation in Applied geology from osmania university in 2004.and now I am working as a geologist in trimex international fze;dubai. I have experience in seismic processing and interpretaion,where i used soft wares life PROMAX,FECOU5.3 ,GEOGRAPHI

To have a challenging career in the IT Industry - in the field of Network Administration, Software Technical Support and Hardware Management

Worked for Mckenzie Forest Products for 25 years 12 years as a Supervisor

Extensive working experience in Chemical Processing, Power Generation and Oil & Gas Industries. Versatile team player with an ability to incorporate new concepts and interact with all levels of professionals. Expertise in Project, Maintenance, Materials Management and ERP (SAP, MAXIMO, Primavera R3)

Heavy Equipment Operator

Over 20 years of experience in a career, dedicated to the provision of engineering services in the development of Maintenance Engineering and completing major projects. I am, most adept at successful employment in a multi-discipline environment.

Environmental Consultant (Engineer/Scientist)/Geoscientist

Profoundly talented and skillful UT/welding Inspector with over ten years experience in field of Quality control and inspection of light and heavy fabrication for refinery, oil and gas transmission line and onshore/offshore steel structure.

Coiled Tubing, Stimulation, CTD, Cathodic Protection, Telecomunication

Microsoft Certified Systems Engineer with over 12 years experience in system and security administration and management.

1 2 3 4 5 6 7 8 9 10 11 [ 12 ] 13 14 15 16 17 18

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out