Resume - Wet Mill Crusher Mechanic Tech 3, 1.5 years experience,

Misco Jobs

Resume #69814

CONTACT INFORMATION:
View contact information...

October 2006 to present

Barrick Goldstrike

Carlin, Nevada

I hired in on October 30, 2006 as a Crusher Mechanic. During this time I have learned to rebuild and trouble shoot Jaw crushers, Gyro crusher(4265), and cone crushers (1352,and 1560), hydraulic systems, belts, pulleys, bearings, gearboxes, feeders and rock breakers. I have completed classes on the gyro and cone crushers, bearings, split bearings, and the roto-line machine. I hired on as a Trainee and am now a level 3 mechanic.

July 2006 to October 2006

Shay Construction

Elko, Nevada.

Working at Shay Construction as a Laborer / Equipment Operator. Starting as a laborer I quickly progressed to the position of Equipment operator / Crew Supervisor. We are currently installing water lines, meters, and install septic systems at new home / apartment construction sites. I also do maintenance / welding repairs on the equipment.

May 2006 to July 2006

Harney Rock

Elko, Nevada

Starting as a laborer at the rock crushing plant I progressed to the position of Equipment operator. At Harney Rock as an operator I was proficient with several different types of equipment including Jaw and Cone crushers, Screening, and Conveying. I also worked on the Jaw Crusher, Cone Crusher, and belt repairs in maintenance. I left Harney Rock after such a short tenure to accept a job at Shay Construction.

July 2005 to April 2006

Advanced Properties

Elko, Nevada

During this time I worked for a private contractor building / rebuilding homes. I was involved with all aspects of home construction and major home repairs including foundations, siding, and roofing.

January 2005 to April 2005

Cantera Steel

Elko, Nevada

January 2005 I hired on at Cantera Steel as a welder / fabricator. In this capacity I worked on Komatsu underground equipment. I left my position here to finish school and get my welding certification.

May 2004 to September 2004

Perry Crane

Elko, Nevada

May 2004 I hired on as a Shop assistant. I worked rigging cranes, equipment maintenance including welding repairs, and shop upkeep. I was laid off due to lack of work.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 201 to 250 of 864)

Go to Search Parameters...

Brief Description

KG Dunaway NCCCO

I have been in mine maintenance for over 20 years, the last 9 as an expat in various countries around the world. I'm a very positive and progressive thinker who adapts to changes and adversties with little fuss. I like to succeed in everything I set out to do

I have over twenty years pipefitting experience. Most of this experience has been in industrial chemical and paper processing. Five years of this experience has been as an foreman. I have used computers for report writing, maintaining records and numerous other tasks, have worked internationally.

Rigging Supervisor

Electrical fitter in a sugar mill where plc plays a important role in the factory

Qualified Fitter and Turner / metal machinist

I have done just about every job in the mines.I have operated all types of Equipment and Have my assistant foreman card and have done some Section Foreman work also and have about a year of experience as a section foreman but it has mostly been filling in when the foreman was absent.

Coal miner with 11 years experience

Diesel technican/mechanic/ Technical Trainer in Iraq/ all heavy duty trucks, trailers vehicles, engines etc/Supervising experience, Excellent organising and admin skills, excellent people skills

8 years of experience in Mill Wright Maintenance in heavy process industries Worked in Heavy Engineering Establishments. Experience in handling Breakdown and Preventive Maintenance Work of Machine Tools. Hydraulic and Pneumatic Problems.

Looking for offshore 28/28 rig welding job

Scaffold Inspection and Co-ordination

Arc, gas, glass(quartz) welding

I HAVE ALMOST 20 YEARS OF EXPERIENCE IN THE ELECTRICAL FIELD RANGING FROM DOMESTIC, HEAVY INDUSTRY, MINING AND OFFSHORE DRILLING INSTALATIONS.

I am a qualified and Certified RED SEAL ELECTRICIAN / E&I Lead Hand with a broad background within the Petro-Chem industry both on and offshore. Experienced in leading teams, self-motivated with excellent communication skills,

Diesel Fitter, Welding, Electrical, Pnuematics, Hydraulics, Horizontal and Vertical Boring, Precision machining, Earth moving Equipment, Crushers, Power screens, Fenner boxes, Jaw crushers, Pneumatic, Plumbing.

I&C Specialist with 20 yrs experience, Navy Sub Vet, PLC/DCS and project management

Project Geologist

Fitter with diesel experience (locomotives) and heavy lift qual.s, looking for work in Perth from January 2008

Welder, Mechanic, Mill Wright, Maintenance

I am post graduate in Geology from Pune University in 2003 worked as a Lecturer on clock hour basis at Rajaram college , Kolhapur. and searching for a job in mining.

Heavy Equipment Operator to include Mobil Cranes, Crawler Cranes, Overhead Cranes, Forklifts, and Tractor/Trailer

Heavy Equipment Mechanic. I Have experience on a wide range of equipment from mining to construction. Experience rebuilding engines, hydrauilic and drivetrain components. Welding and fabrication skills. John Deere and Hitachi factory certified. Hard working and self motivated individual.

22 years in operations.

I inspect equiptment for faults & malfunctions,determine repairs required,do the repairs required and test them.

Blast Hole Driller & blast tech.

Great diagnosic skills, hard worker willing to travel

I know I could be a good asset to your company. I have been in the commercial, industrial electrical field for 9 years. I have skills in various fields such as electronics, PLC work, carpentry, masonry, concrete work, mechanics, welding, and fabrication.

Caterpillar Dealership, Surface and Undergound Mining Experience.

Experienced in Mobile and Industrial hydraulic components overhaul and repair including final drive of Komatsu D375-5, O&K RH-40 final drive, cylinders, track adjuster cylinder…etc.

T & T Diesel Mechanic & Automotive Mechanic

7 yrs. underground mining experience including position of leadman and 5 yrs. commercial/industrial pipefitter also in the position of leadman and foreman.

I have worked in the mining industry for 20 years. I am seeking work in Australia.

Experienced Mechanic, Have a wide range of experince from small engine to large diesel.I have a comercial drivers license and current DOT physical. Licensed Classes ABCD. Endorsements Hazmat, tanker, doubles and triples. I am also an experienced driver.

Electrical Licence. C class heavy vechile licence.

Mechanical Draughtsman with expirience in Automobile industry (Engine Design)

30+ yrs in heavy equipment of all types, mostly friction cranes, draglines, etc.

Boilermaker/Rigger

Qualified Plumber & Gasfitter, Experience in Industrial Mining, Roofing and pipe work. Commercial Plumbing & Roofing,

Wet Mill Crusher Mechanic Tech 3, 1.5 years experience,

Electrical Professional available prefer exploration camps and remote locations

I have several years of experience working in international trading (export and import), manufacturing, international shipping, and forwarding companies. During this time, I have obtained excellent knowledge of domestic and global logistics, and supply chain management.

A highly qualified crane operator, for over 25 years, experience in dfference kinds of crane, payloader, trailer, forklifter etc.

Have a journeymen welding ticket with red seal and journeymen carpenter ticket, have extensive fabrication experience, maintenance experience in the shop and field, have worked on p&h shovels, all types of caterpillar equipment, have worked on surface open pit mines and underground hard rock mines.

Millwright looking for a new career

Recent graduate with a Bachelor of Applied Science in Instrumentation seeking employment for supervisor positions within the instrumentation field or as an E & I Specialist.

I am a boilermaker fabricator looking for work in mining. i would greatly appreciate it if any position ,any were in the world came up.

Underground fitter - Caterpillar ad40 ad45b 2900 2900g 1600g etc it12 it 18 it28g etc 12h graders, Atlas Copco rigs. M2d L6c 282 boomers etc.

Skilled in AutoCAD, Microstation, Survey Data Tech

Heavy Duty Diesel Mechanic/Fitter. 12 years experience with Volvo trucks and buses, hard working reliable skilled diesel technician.

1 2 3 4 [ 5 ] 6 7 8 9 10 11 12 13 14 15 16 17 18

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out