Resume - Certified surface and underground coal miner

Misco Jobs

Resume #73104

CONTACT INFORMATION:
View contact information...

OBJECTIVE

Working as a certified surface and underground coal miner I have always expressed an interest for challenging and demanding career field. I respond well to a challenge and thrive on the opportunity to enjoy the rewards of hard work and dedication. I have exceeded in job site safety and attendance being highly respected by co-workers. Noted for strong communication and negotiating skills with the ability to adapt and work well under intense conditions to meet operational requirements.

WORK OF EXPERIENCE

2002 - 2008 Motion Solution LLC. Beckley, West Virginia
Technician Crew/ Co-owner

Building and performing repair maintenance blown alcohol racing engines. Tire changes, car adjustments, re-fueling, determining track conditions for adjustments to suspension system. Using portable weather stations onsite to determine atmospheric conditions to tune engines for each pass. Keeping daily maintenance and part logs along with shop stock orders

2006 - Current B and B Fabricators Saltville, Virginia
Pipe fitter / Fabricator

Fitting 3/4 to 24 inch pipe in preparation plants, routine maintenance and repairs working on the surface of coal mines. Cutting and welding of structural steel, cutting and welding thick wall and DOM pipe using 7018 1/8 inch rods and/or 6013 5/32 rods. Plate and Chute work working with Stone hard, Dura liners, ceramic, and hard plate. Installation of Raw Coal Screens, new pedestal mounts, structural supports and new feed chute work. Structural steel and conveying systems fabrications. Cutting, welding, and laying pipe with no height restrictions or limitations. Also, operating job site equipment and tools such as fork lifts, boom trucks, Hilti drills, etc. Setup of oxygen and acetylene tanks and gauges.

1999 - 2002 Vienna Volunteer Fire Dept. Vienna, West Virginia
Probationary Fireman

In this job I learned safety on the fire ground, science of fire, properly wearing and working in an (SCBA) Self Contained Breathing Apparatus. Several intense search and rescue methods, smoke training, ventilation, and forcible entry. Learning portable fire extinguishers and foam streams. Working well with others to accomplish safe fire ground operations, command and control. Also, skills in auto extrication, rescue tools (Jaws of Life, etc.) and mechanical advantages, Earning me several commending newspaper articles and several certifications in firefighting and first aid.

EDUCATION

2000 - 2002 Home Schooled Parkersburg, West Virginia
High School

2001-2002 West Virginia University Ext. Parkersburg, West Virginia
Firefighter I

2006 - 2006 Tincher Safety, Inc Cabin Creek, West Virginia
State Of West Virginia Surface Miner Certification# 4-19820
State Of West Virginia Underground Miner Certification# 4-152088
HEAVY EQUIPMENT EXPERIENCE

Caterpillar 773 Rock Truck
Caterpillar 777 Rock Truck
Caterpillar D6 Dozer
Caterpillar 232 Skid Steer
New Holland Skid Steer
National 900 A Boom Truck
GMC Top Kick 7500

D6E Dozer pulling steering clutch for repair

Caterpillar 773B Rock Truck with Heui engine (hydraulic electronic unit injector)
repairing a wiring harness problem under the valve cover

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 501 to 550 of 891)

Go to Search Parameters...

Brief Description

Electrical and Instrument system design and commissioning, Project Engineering, Control and Automation Engineering. I am degree qualified in Electrical and Instruments

Millwright Journeyman

Well experienced as an Electrical Field Maintenance and Construction QA/QC & Foreman in Oil and Gas Facilities, Refineries, Airport and Mining Industries with a demonstrated ability to lead Maintenance and Construction Projects.

Over 20 years Quality Management and Supervision experience in Heavy Engineering Construction Industry

Cwi/QA/QC Manager

Electrical

I have 28 years experience in maintenance, the experience gained in the instrumentation trade up to the management level. I have gained vast experience in technical faultfinding and technical and staff related problem solving, mostly in the shortest time due to process requirements.

Registered EU Mech. Eng w/ 15 years experience in the oil and gas environment - North America, North Africa, Middle East,. High-energy individual whose best attribute is my ability to work well with other people.

I have a strong construction background and am looking for a new career in mining.

I bring with me over eight years of practical experience working various categories of heavy equipment in a variety of different environments including surface and underground mining. I also have completed both 24hour and 40 hour HAZMAT

Welding and electrical and management and mining class 32 hour certified fork lift operator

Piping and Welding Supervisor QA

I served my apprentership with Suir Electric an qualified in 2003. Since then i have worked in all areas of Domestic, Commercial & Industrial electricial work. In the last 18 months I have been employed as a Lifts & doors engineer installating and maintaining.

SKILLS SUMMARY Manager, with strong electrical and mechanical background, 15 yrs construction and maintenance electrical experience, 9 years mechanical experience, performed purchasing and business development skills,. Proficient in Microsoft Word, Excel,

I have over 27 years in mechanical repairs

I have 15 years of process operating experience and 3 years of heavy equipment operating/ underground mining experience and I have been active on an Emergency Response Team as well as the Occupational Health and Safety committee for the past 3 years.

I¡¦m a Canadian/ Syrian citizen with Business, Engineering, Water/Wastewater and (HSE) Health Safety Environment Background I have been working in the field of HSE (Health Safety Environment) management for past 10 years/ 5 yr Management HR BUS PR Project GS ADM OPS

Siemens , Allen Bradley PLC programming, Honeywell TDC 2000 and Foxboro DCS programming and troubleshooting. Profibus Certified installer and troubleshooting. Project management. Wonderware InTouch and Citech SCADA systems. Excellent troubleshooting skills.

Lean Master and Master Black belt instructor, facilitator and coach currently with BMG (Breakthrough Managemnt Group). Main function currently as Six Sigma and lean account executive responsable for the deploymemnt of Lean and Six Sigma initatives with various local and international orgenisations.

Dirt Superintendent / Foreman/ Heavy Equipment Operator with 25 years experience.

MSc Mining geology student graduating this summer. Looking for a summer project in association with a company, preferrably in exploration, hopefully leading to employment. Interests are in Gold and Ni-Cu-PGE exploration. Extensive field experience in remote areas.

Fitter, Turner, Machinist, Planner, Scheduler

Supervision construction commissioning startup air separation ,heavy oil etc.

I have 20 yrs experience as a surveyor. I was trained in the U.S. Army as a Field Artillery Surveyor. I have experience on highrise buildigs and sub-divisions. I have surveyed oil and gas pipelines and power line routes. I also worked on marinas providing layout and volume reports.

Superintendent, Rotating Equipment - Estimate manhours, design schedule, Supervise and coordinate all rotoating equipment installations.

General Safety & Surface mines training, NORCAT, Sudbury, ON

Heavy Duty Diesel Technician/Fitter, service field experience, two years supervising/consulting on mining equipment, 10 yrs crane experience (tadano certified), class 1 driver's lisence (air brake endorsement)

Fast track professional, successful in field of instrument, control and electrical for installation, commissioning, repairing, maintenance, calibration and modifications of Electronic, Pneumatic, Safety, Analytic instruments. and control systems.

Experienced chemist with over ten years working in EOR/IOR projects associated to laboratory and field to the oil & Gas industry in Venezuela. Coordinated and used different analytical equipments, methodologies and facilities, following standard procedures of laboratories and operations

Apprenticeship exemption granted for the technical in-class component Levels 1, 2, 3

Mining Engineering with MBA

QUALIFICATIONS/LICENSES: Full Drivers License, Class 2 Truck License, 'Site Safe' endorsement, 'Wheels, Tracks & Rollers' Drivers License & Endorsement (Unit Standards 16701, 16702, 16703). Skills Summary: Digger Operator, Bobcat Operator, Roller, Truck Driver (4 wheeler), Concrete Laying,

Miner/trainer/shift boss assessor

I am trained in the mechanics and operation of back hoe, bobcat, jack hammer, dumptruck, forklift, sissor lift, crane(boom truck), delimber, and rock crusher. I also have skills with tack welding, drafting and construction.

Recently graduated from 4yr BA(Hons) in Geology, looking for FIFO work in any country, flying to/from UK/Ireland. Course & dissertation work provided some fieldwork experience. French to higher Leaving Cert level. Please see personal statement in resume for more details.

I am a 3rd year heavy duty mechanic i have worked on all sorts of equipment from electric gorman rupp pumps to desiel engine huydraulicly actuated concrete pums,air compressors ,loaders,cement mixer trucks,centerfuges , pannels,pipehaulers, forklifts

Can work with computers, good communication skills, team player, can work under pressure

Machine operator maintenance personel quality lab tech. Geology major consulting major sales

Transport & Logistics Safety (HSE):Road Safety Monitoring, • 3PL Contractors/ Subcontractors pre start up HSE Audits (HSE MS, HSE Plans, Documentation Control, Vehicles Roadworthiness Inspection, Drivers Competency Assessment, Workshop Audit, Transport Routes Survey, etc.)

Fitter Including Machining and Diesel Fitting

experienced electrician with vast instrumentation and supervisory experience.

15 years experience in the management, production, materials, logistics and international transport fields, 13 of which are at managerial level, the last 10 years being spent as an expatriate in Nigeria, France, Togo and West-Central Africa.

I am experienced with a wide range of underground equipment. I am confident in my ability to work in an underground mine and add to the production of mined materials. I will be an asset to any company seeking a hard working individual with the desire to learn and achieve.

Possess solid understanding in Building Services, such as designing, managing projects, supervising and evaluating payment certificates

Skills: Auto CAD versions 9 thru 2006i, Prime Medusa, UNIX, Micro Station, Microsoft Office, along with several other computer based applications.

I am working as an instrument technician in petrochemical industry and i have more than 10+ year experience in this field. I know about repaire, calibration and maintanance of electronic field instrument like transmitter, switches, control valve, dcs an dplc system, bagging machine.

Certified surface and underground coal miner

Logistic Job Skills: Stock Turn-in/Turn-out, Stores Indent/Requisition, Stores Data Entry, Physical Inventory Management, Stock Replenishment, Management Reports, etc.

I have almost completed an apprenticeship in Automotive (Mechanical-Heavy Vehicle Road Transport) and am seeking to gain experience in the workplace as an Assistant to a Heavy Duty Mechanical Fitter.

SCADA, DCS, T&C, O&M

1 2 3 4 5 6 7 8 9 10 [ 11 ] 12 13 14 15 16 17 18

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out