Resume - 7.5 Technical experience, guidance and command in all analytical and environment...

Misco Jobs

Resume #73214

CONTACT INFORMATION:
View contact information...

RESUME
OBJECTIVE

To hope my skills rise above the corporate ladder in the field of development. Always about the target and try to over come the difficulties to achieve the objective and looking for a fast track challenging career in a growing organization.

EXPERIENCE

Working as a Environmental Specialist in Royal Commission Contract. Kingdom of Saudi Arabia

7.5 years Chemical and analytical experience in Government of Kerala OSHA,PFA,NIOPH,US-EPA and ASTM standards. 7.6 years additional experience as an Environment Health and Safety (EHS) Committee Executive Member in Ministry of Health Services, Government of Kerala. India

1.5 years part time Research experience in Organic Research Division, Department of Chemistry, University of Calicut. India

JOBS PROFILE

Technical experience, guidance and command in all analytical and environmental based activities, services, management and techniques.
Knowledge of international standards, regulations, legislation and codes of practice,
Experience in standardization and calibrations of analytical instruments.
Hands on experience with High Performance Liquid Chromatography (HPLC, Waters), Gas Chromatography with MS (GC/MS), Microwave Digester (MARS,USA), Atomic Absorption Spectrometer (AAS).
Analytical based Software skills
* Familiar with Chemdraw software
* Experience with Empower software
* GBC Aventa software
* GC Solutions

COMPETENCIES
* Fast learner. Adapt well to changes and pressures in workplace.
* Work effectively with diverse groups of people.
* Friendly with an upbeat attitude.
* Ambitious and committed to excellence.
* Committed to deadlines and schedules.
* Able to relocate anywhere.
* Good presentation skills.

PROFESSIONAL QUALIFICATION
Degree Year University Major subjects studied
M.Phil Chemistry 2007 University of CALICUT Theoretical Chemistry, Spectroscopy
Organic Chemistry (Elective)
MS Chemical science
2000
University of KERALA, India Analytical Chemistry, Organic Chemistry, Inorganic Chemistry, Physical Chemistry
B.S Chemical science 1993
University of KERALA, India Organic Chemistry, Inorganic Chemistry, Physical Chemistry.
Physics, Mathematics

RESEARCH PUBLICATION:

* Composition and antimicrobial activities of Mangifera indica. (Paper presented in National seminar on Green Chemistry and Natural products, University of Delhi, India.)

* Composition and Biological activity of the essential oil of Litsea laevigata nees (Lauracea). (Paper accepted in Natural products communications)

ACADEMIC MEMBERSHIPS:

* Member in American Chemical Society.
* Member in Indian Society of Analytical Scientists.
* Member in Science Advisory Board.
* Member in Council of Chemists. India.
* Applied for Fellow in Institute of Chemists. India.
* Member in Association of Food Scientists and Technologists. India.
* Member in All India food Analysts Association.
* Member in National Service Scheme.

ADDITIONAL QUALIFICATIONS
B.Ed

1996
University of KERALA, India Physical science
Teaching methodology
Education technology

B.L.I.Sc 2000 University of CALICUT Library And Information Sciences
DCA (Diploma in computer applications)
1999 Phase Computers HYDRABAD Microsoft Front Page, Network installation & Administration, Database Administration, Windows9x, WindowsNT, Windows2000, WindowsXP & Linux.
PGDCAQM
(Post Graduate Diploma in Chemical Analysis and Quality Management) Course incomplete University of Hydrabad Basic Electronics, Quality Management, Instrumentation, Analytical Chemistry, Spectroscopy. Environmental Chemistry

SHORT EVENING COURSE

* Kerala Government Technical Education English Typewriting
* Certificate Course in French (Doing)

PROJECTS

Project 1: Composition and antimicrobial activities of Mangifera indica.

Supervising guide to

Project 2: Quality analysis of fresh water resources in Ullikal Panchayat. India
Client: M.Sc Project, St.Mary`s Post Graduate College, Waynad

Project 3: Study of Physical and Chemical properties of carbonated water from various small scale industrial units in Calicut City
Client: M.Sc Project, St.Mary`s Post Graduate College, Waynad

Participated important Seminar/Workshop/Conference/ Training etc

Training
* Food Administration
* Water Quality Monitoring and Management

Seminars
* New vistas in Chemistry
* New Trends in Chemistry
* Modern trends in Chemistry
* Library Management
* Adult &Continuing Education

Workshops
* Bioinorganic Chemistry
* Bioinorganic Chemistry
* Chemical Thermodynamics
* NMR Spectroscopy

Symposium
* Polymer sciences

Conference
* Material sciences and analytical chemistry

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 551 to 600 of 892)

Go to Search Parameters...

Brief Description

City and Guilds Diploma in Electrical Engineering,Apprenticeship training,5 years experience.

Over 26 years of skills, education and professional experience with large and small-scale industrial plants, utility design, maintenance and operation, and materials handling with 10 years Utility Engineering instruction experience at a local Technical College. Management skills include working to s

Manager - Business Operations Consulting ¡V Constructability Planning, Tracking Systems, and Composite Modeling.

Certified General Contractor, Concrete finisher, Underground Utillities, Reliable, Creative,dependable

Experienced Heavy Equipment Operator/Open Pit Miner/Willing to relocate

Company Dispatcher,service Coordinator,Administrative Exp.

Experienced Mechanical engineer as Tunneling specialist in operation,maintenance,construction tunnels and executing projects.

Built, operated and maintained three processing plants. Abrasives, roofing granules, high density sands for water filtration and coal preparation were the main products.

Electrician-Industrial

I have over 30 years of experience in the electrical industry, primarily in the industrial sector, and in a supervisory capacity.

I would like to bring to your kind notice that I have got Ph.D in Hydrogeology, post M.Sc. (Tech.) in Hydrogeology, M.Sc Geology from prestigious Andhra University. I am having 15 research publications in National and International reputed Journals. I have Completed 2 major Research Projects

I have over 25 yrs experience in the oil and gas industry in various positions and with my technical training of 3 trades which are as follows; Licensed H.D. (diesel) mechanic, Licensed millwright, and Licensed motor mechanic I believe that I would be an asset to your organization.

Engineer / EMS / SCADA / Electrical / Telecom / Power Sector

I have been a heavy equipment operator for ten years with extensive mining experience.

My skills are in construction, fabrication, maintanence and electrical HV fitting. I have CN, LF and WP tickets. First aid cert.

Master Electrician with 26 yrs experience in the construction field

Caterpillar maintenance specialist.

12 years international sub-structure civil engineering experience.experienced heavy equipment operator.

I have been working as a diesel mechanic.

Dual Post Graduate Mechanical Engineer with 10 years of experience

Educated, experienced, reliable, and hard working. Please ask for refrences, as I have many...all very positive and complimentary. Willing to start anywhere (within reason) and work my way up !

If you read my work history you will see a great amount of experience in very relative systems to the position I am applying for. I can't say I know it all, but I have been exposed to most of it. As Manager or Superintendent, I have administered and negotiated labor, materials and services.

All elements of safety implementation and instruction

I am able to effectively perform set tasks, successfully fulfil the task objectives and meet their dead-lines. I report information to the necessary authorities by means of written and/or verbal reports which are reliable and accurate.

skills and qualifications include: Commercial Diving, Underwater construction I am skilled in all kinds of works underwater, pipeline inspections and repairs, flange ups, Locating, equipment maintenance. welding, burning, non destructive testing levels 1 and 2. and underground coal mining.

QC Mechanical, API 570, API 653, CWI & NACE coatings inspector

I rely on over 14-year experience in Instrumentation & Control Engineering in FEED & Detailed Design Engineering, Construction, Supervising, QA/QC, Commissioning, Testing and Maintenance of Oil & Gas (Offshore, Onshore), Refining, Petrochemical and other major projects.

Project Management

Enviromental Process Engineer/Technician

I am MSHA certified. I have experience crushing and screening. I can operate loaders, dozers, scrapers, excavators and I have my CDL.

Eight (8) years experience as heavy equipment operator local and overseas

Mark up Leading hand, Blast crew member, Westrain Plant Operator Training Course

I am working a year now on trucks and cars and want to do my apprenticeship as a diesel machanic but have no place that can help me

I'm a very fast learner and I'm mechanicallly inclined and have the ability to be a dedicated employe

Qualified health and security manager. Experienced in leading H&S supervisor on oil and gas plants or on remote site. Also have experience on construction site. Implementation of H&S programs, accidents and incidents investigation.

Assignments in Mould Design / New Mould manufacturing / Mould repairing / Reverse Engineering / New Product Development / Quality Management with a growth oriented organization of repute

Journeyed Industrial Electrician

PLANNER SMELTER

certificate of proficiency in general construction carpentry[framework/formwork infastructers/ concrete finishing/ steel fixing

Vast array of critical experiences. Operate both independently (single remote site medic) or team (advance life support ambulance service). Disaster management, coordination skills (patient, scene & bystander safety) during crucial events. Coordination of multi-disciplinary emergency services (fire,

Bachelor of Engineering (Electronics & Communication) ,A.I.V.,A.M.I.E.

I am an Instrumentation Technician and Instrument/gas fitter with oil,gas, and industrial experience. Skills: AC/DC generator, chemical injection, I&C, PLC, panel tech, compressor, automation, integration, etc.

7.5 Technical experience, guidance and command in all analytical and environmental based activities, services, management and techniques.

Heavy Equipment Operator (Certified)

I did both undergrad and master's in mechanical engineering with broad range of experiance both in mechanical engineering along with IT

My 19 years of experience reflect 13 years of project detailed engineering as a Control & Instrumentation Engineer and 4 years in maintenance and upgrade projects in a reliability based environment, applying amongst other the following typical standards and practices: ANSI, IEC, BSA, DIN, API

MSHA Certified, 5+ years construction trade experience, experienced heavy equipment operator, bilingual (spanish/english)

Installation, calibration and maintanence of mudlogging sensors. Entire Mulogging services, drill cutting collection, identification and description, identification of over pressure zones

Instrumentation project management/Instrumentation designer

Working experience - 16 years & 3 months. Highly skilled, experienced, expertise and knowledge as a driller

1 2 3 4 5 6 7 8 9 10 11 [ 12 ] 13 14 15 16 17 18

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out