Resume - I have been a electrical/electronic repair for over 15 years. I can repair anyth...

Misco Jobs

Resume #77262

CONTACT INFORMATION:
View contact information...

Statement Results oriented, conscientious lead electrician experienced in computers, HVAC, kitchen equipment, radar and component repair. I am able to work as a team member or independently to get the job done. Excellent analytical skills promote good troubleshooting/repair, read schematic design and have good record keeping for maintenance, inventory control, and parts ordering.

Work Experience

Highline School District - April 2002 – June 2008
17810 8th Avenue South, Burien, WA 98148 Telephone: 206.433.2252
As electrician for the highline school district part of a team maintaining 52 facilities in the second largest school district in the state, I am responsible for all kitchen equipment repair and maintenance, HVAC systems, computer lab setup and wiring and other general plant repair and maintenance duties. Maintain records, order parts, and perform other necessary duties to maintain smooth and orderly operations.

Merchant Seaman – May 1997 to March 2002
Various Vessels and Employers providing seafood processing and geophysical research
Most often sole electrician on craft responsible for sonar, radar, HVAC systems maintenance and repair, galley machinery, processing machinery and systems, as well as general electrical wiring work and computer maintenance and repair. Responsibilities also included parts inventory record keeping, parts ordering, and maintaining maintenance records and scheduled routine diagnostics and servicing. List of ships and references are available upon request.

Antarctic Support Associates – June 1995 to October 1996
19411 Inverness Drive East, Suite 300, Englewood, CO 80112 Telephone: 303.790.8606
Electronic Technician on board the Research Vessel Polar Due operating out of Chile in Antarctic waters. Responsible for installation, repair and troubleshooting of electronic and navigational systems throughout the ship to include two complete computer systems with 18 terminals, Seabird sensor equipment for underwater, navigational communications, ship HVAC system, and weather equipment. Also responsible for on-board power and PBX systems.

Construction Electrical Support and Electrician March 1991 to June 1995
For Asphalt Equipment and Service Company, I was the electrician responsible for installation of switch gear and control panels in mobile control rooms of asphalt equipment command centers. Complete mobile van system with 480ac 3phz. Some vans were as high as 2000 amp draw. For Hendricks Electric, I worked as a member of an electrician team responsible for ship's rewiring for the coming season. These were from 480v 3phz and down. Compete processing of ship electronics. Along with modifications to switch gear for power systems. Troubleshooting, repair and installation. Worked as Chief Electrician for All Alaska Seafood's, Inc, and Unisea, Inc for two seasons maintaining all barge, ship, and processing plant systems, including troubleshooting, repairs, installation of new equipment and part ordering for navigational processing, communications, and computers. Experience gained at that time included repair and troubleshooting of conveyers, pumps, high pressure pumps, compressors, generators, boilers, steam and water (fresh and salt) lines, and forklifts.

Vinnell Corporation August 1989 to July 1990
10030 Rosehaven Street, Suite 100 Fairfax, VA 22030 Telephone: 703.385.3435
Calibration Technician for Saudi Arabian National Guard in Riyadh. Responsibilities included personnel supervision of staff engaged in the repair of Commel equipment, testing calibration procedures for repair of electrical, mechanical and electronic measuring and answering instruments.
August 1989-July 1990

Other Employment
The Boeing Company
3003 West Casino Road, Everett, WA 98203 Telephone: 206.655.1131

Pacific Vascular, Inc.
1401 E. Jefferson Street, Suite 500, Seattle, WA 98122 Telephone: 206.292.6444

ITT Support Service, Inc.
621 Industrial Ave., Paramus, NJ 07562 (Antarctic South Pole Station) Tel: 612.938.3767

RCA/OMS, Inc.
Cape Lisburne AFB, Kotzebue, AK 96752 907.725.1201

Schools/Training (Employer and Military Reserve)

Electrical Cryptographic Communication Systems 1977, 1980
Scientific Radio 1986
Blue Prints 1989
US Navy Weather Equipment 1986
Computer System 1986
Fire Fighting 1986
Clover Park VTI 1973
Graduate Lakes High School 1973

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 51 to 100 of 944)

Go to Search Parameters...

Brief Description

25 years in coal mining experience, willing to relocate, hard worker, willing to work overtime, available as soon as possible

Advanced engineering education with a MS degree in Mineral Economics. Emphasis in Financial Risk Management, Advanced Mineral Asset Valuation using MonteCarlo Simulation and Option Pricing Theory, Investment and Portfolio Management, Bilingual Spanish-English

Welder trade over 16 years +welding supervisor oil and minning industrie

Heavy Equipment Technician - Canadian Interprovincial Journeyman - 20+ years experience in truck and coach, heavy equipment, and diesel engine repairs. For the past 14 years have been heavy equipment technician for a John Deere Dealer.

Automotive Electrical Fitter Trade – covering Heavy/Duty mining and agriculture equipment working on Cat equipment and assorted mining equipment on sites in southern cross WA

A 30+ years experienced mining equipment maintenance manager. Working on projects in the USA and overseas in positions from mechanic to manager in underground and open pit mines.

Water well driller, TH60, T4, CP RT1800, Air & mud rotary, DTH, Under reaming

Over 18 yrs underground const. & mining experience. Roof support & bolting, ventilation, and direct supervision of employees. Current mine foreman/examiner certificates. Working knowledge & understanding of MSHA regulations. Teach, practice & enforce safety. Strong work ethics & leadership skills

Can operate machine tools for cutting metals and forming metals, mechanical technician

Multi-skilled artisan with 24+years mining experience.

Mine surveyor with eight years experience in carryout surveys for open pit mining.

I have over 19 years experience as a qualified maintenance/diesel fitter working in both gold mines and various workshop based jobs and more recently as a Mechanical Supervisor in Africa. During my last and previous roles I have been in supervisory positions.

Heavy Equipment Mechanic

Trade Skill: Tradesman in Heavy Duty Diesel Fitter/Mechanic

NCC in Diesel Plant Fitting- repairs to vehicles, engine overhauls, troubleshooting, planned maintenance, preventive maintenance

I have been a electrical/electronic repair for over 15 years. I can repair anything electricial

mining work on heavy eg.

20+ Years of experience in drill and blast procedures

Quality control inspector

Qualified Welder, Specialised Welding, Semi skilled Boilermaker, Line boring, Supervisor, Jnr. Plant Operator

Skills: Shift Supervisor, Air Jumbo, Electric Hydraulic Jumbo, Remote Control Electric and Diesel Scoops, Haulage Trucks, Boart Long Hole Drilling, Blasting, Jack leg, Rock Bolting, Cavo, Timbering, Staging, Slusher, Development, Raise Mining, Mine Rescue, Fire Fighting, First Aid

Over twenty one years experience as Heavy Duty Mechanic, seventeen years with underground mining contractors. Over eleven years experience as Master Mechanic and Lead Hand.

I am a experienced industrial electrician/electrical supervisor of fifteen years. My electrical experience is in the mining and rolling mill industries. I also Possess my MSHA and West Virginia electrical certifications up to and including high voltage for underground and surface work.

I am applying for a Maintenance Supervisor, Chief Mechanic or Rig Mechanic position. Please see my attached C/V. I am very interested in working offshore but have 7 years experience on land rigs. I do have my BOSET course and have updated my other certificates. I realize that I don’t have the offsho

March 24, 2007 Electrical Technician / Electrician

Mobile Equipment Maintenance position sought. I am a Mechanical Engineering Technologist as well as a certified Heavy Duty Mechanic with over 30 years of experience. I have excellent trouble shooting skills in hydraulics, electrical, and mechanical systems.

Internationally Experienced Heavy Equipment Mechanic - Workshop Supervisor

I can maintain, repair, disassemble & rebuild any piece of Heavy Equipment, Mining, Drills, Scoops, Shovels, loaders, dozers, Tractors, earth moving equipment, on & off road, transport trucks & trailers, logging, forestry, & construction. Propane, Diesel, Gas, Electric, and Hydraulics,& more

Mechanic,Electrical Foreman

over 10 years experience in electronic and over 2 years offshore electrical.

Exploration Geologist and well aquented with the mining and Exploration Software , almost 4 years of experiance. in Mining and Exploration.

Eqiupment Operator Open pit mining Haul Trucks 100ton to 330ton Tigers Dozers 10+ years big mining operations on dumps, high walls, and P&H shovel floors.

Welder ***16 years of Experience*** Incredibly Hard Worker

Caterpillar 3516,789,793 haul truck and support equipment mechanic and supervisor,associate degree and teams management training

10 years experience with heavy equipment and industrial service and repair

20 years of construction and equipment operator and house and equipment repair

Jounyman Heavy Equipment Mechanic

16 YRS OF MINING operating varies types of Equipment dedicated to what I love

A dedicated heavy equipment operator with 15 years of open pit mining experience. Supervised the daily production of sand plant operations. Including the harvesting, processing and staging of open pit materials. Experience working with numerous soil types.

Geologist and mineralogist (double degree, diploma). 1 year experience in mapping, supervision (rig and camp), underground, grass root exploration and production.

19 yrs of hard rock mining experience (ie: copper, gold) as well as diamond mining. Will adapt to most enviroments and willing to work overseas; will reply to all responses. Sincerley Stu Hogg

Training and trade testing of apprentices

Heavy Equipment Operator

I have 8 years experience in a large cement plant where I was a Millwright for 6 years. I also was a leader of the Safety Committee and I have a strong knowledge of the MSHA regulations

I am looking for a position which carries high impact as well as new challenges.

Worked surface mining 14 years heavy equipment

team player, I can work safely even with minimal supervision. proficient in in underground and surface drilling.during my last employment i was awarded with safety performance recognation.

Mining experience 20 yrs. Leader in all facets of underground mining,stope drift and timber leader. Jumbo jackleg stoper, heavy equipment truck to 40 ton tamroc jumbo, common core, Ontario mining certificate, various safty certificates, mine rescue certificate.

Presently have 32 years of sawmill and planner mill experience Operated all heavy equipment involved with lumber operation Safe work habits witch are indicated by 1 incident in 32 years Excellent mechanical knowledge

A dedicated, committed individual who is both practical and adaptable positive and versatile a self-starter with an ability to motivate individuals to achieve results a team player.Years of experience in the industry, wanting owrk overseas. flexible and reliable

1 [ 2 ] 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out