Resume - Repair and Maintenance, Product Quality Analyst, electrical fault analysis, acce...

Misco Jobs

Resume #78837

CONTACT INFORMATION:
View contact information...

Career Objective
To become a part of a growing and respectable company that has stability and advancement opportunities where I can expand my knowledge and skill sets.
Education
Associates of Applied Science GPA=3.85 out of 4.0 graduated from I.T.T. Technical Institute
Major in Electrical Engineering
CCNA Networking Associate Certification

Experience
2007 – current Texas Instruments Stafford, Texas
Repair and Maintenance Technician Prober and Tester support

* Isolate, troubleshoot and repair multiple tester platforms, which include Teradyne, Polaris, LTX Fusion, and various other customer test platforms.
* Run diagnostics and electrical fault isolation
* Board replacement
* Power Supply adjustment and replacements
* Support the test floor and maintain tool utilization at 98%.
* Interface with customers and engineers to provide increased quality and dependability on any all tester platforms.
* Maintain and order spare parts if needed.
* Troubleshoot PCB's to the component level and repair as needed to maintain tester utilization and reduce downtime.
* Access and usage of Unix and Linux operating systems.
* Extensive ISO 9000 training

Experience
2003 – 2007 Texas Instruments Stafford, Texas
Product Quality Analyst AEC Automotive Division

* Analyze Micro controllers. Through electrical fault isolation techniques.
* Support customer returns and improve quality through defect identification, defect reduction, defect electrical isolation, test case improvements and implementation. Drive customer returns to closure and identify root cause.
* Operation of Automated Testing Equipment: Platforms: Teradyne, Polaris, Fusion, and various other customer test platforms.
* Provide corrective action to reduce defects to improve quality and reliability.
* Provide formal status and final reports in the 8D format.
* Extensive ISO 9000 training

Experience
2000 – 2003 Texas Instruments Richardson, Texas

Plasma Test Laser Technician
* Operate Laser, VCT, VLCT and LTX Fusion series testers
* Operate under engineering conditions "Load specialty Job files etc"
* Interface with Engineering on Dispositions and minor issues with product flow
* Monitor and troubleshoot tester setups to maximize yield and minimize probe / re-probe cycle time and scrap
* Perform data analysis in performing lot disposition after processing
* Work closely with PDE and assist as I can in bin summary analysis, material scrap/dispositions and program anomalies
Experience
1999 – 2000 Texas Instruments Richardson, Texas
Wafer Fabrication Manufacture Specialist, (Photolytic)
* Work in a clean room environment
* Wafer handling protocols
* Operate photolithical equipment in production of silicon wafers utilizing precision optical equipment (electron microscopes, steppers using unix xterm interfaces and alignment machines
* Follow written and verbal procedures
* Interact with customers and suppliers within a team environment
* Troubleshoot exposure problems and make adjustments accordingly
* Identify hold lot issues; implement corrective action and direct rework as necessary

1987-1999 Texas Instruments/Raytheon McKinney, Texas

Electronic Engineer Technician AT/ET (Acceptance Test,
Environmental Test) Job grade 74
* Perform Qualification testing on deliverable/prototype products
* Provide formal documentation on testing results and events performed
* Trouble shoot malfunctioning systems and work closely with Engineering to correct issues, utilizing voltmeters, oscilloscopes and analytical software relevant to the particular system under test
* Interface with customers/suppliers within the organization
* Control work flow to meet customer demands and on time delivery
* Work with and write formal operating procedures and written operating instructions as needed in operation of systems to meet Military standards and customers needs
* Maintain and trouble shoot equipment used in the lab (Test sets, Chamber controllers, vibration controllers, circle chart recorders, meters, PC's, operating systems such as Windows NT and Unix/Solaris.
* Gather field data on systems, instrument them with accelerometers, operate them under field conditions while recording on a DAT machine, take the data and import it into a signal generator, and alter the signal as needed per customer requirements (increase or decrease DB/RMS levels) to be input through Electro Dynamic Shakers controlled by Ultra Spark workstations running on Solaris Unix and Spectral Dynamics Shaker controller software
* At times provide LAN connectivity so that the customer can interact with their units under test from home or from their workstations. Some test are very long durations, sometimes as long as 1 year (Reliability Growth and accelerated life Tests)
* Perform sound tests within a soundproof environment, recording DB levels under operational and non-operational conditions to meet customer requirements
* Provide testing recommendations to customers to meet Military standards

Special Skills
* Extensive electrical test data analysis. Able to interpret electrical functional data for electrical fault isolation.
* Power Supply functionality, adjustment, and replacement
* Good understanding of electrical circuitry and their functionality.
* Good understanding of semiconductors, their properties and fabrication methods and techniques.
* Certification of completion of Advanced Vibration Equipment Operation Administered by Environmental Test Laboratory of Texas Instruments
* Use testing and monitoring equipment as in voltmeters and oscilloscopes, signal generators (Spectral Dynamics software)
* Good written and communication skills
* Work well in a teaming environment
* Work with little or no supervision
* Control workflow to meet customer requirements
* Read drawings and schematics, follow and write formal procedures
* TQC certification (Total Quality Control)
* Basic Unix operating system usage
* Signal generation and wave form manipulation using Software made by Spectral Dynamics
* Troubleshooting skills, some component level and card to system level
* Operation of Teradyne, VCT, VLCT, LTX Fusion Probe testers
* SMS functionality
* Microsoft Word, Excel, some Access
* Operating Systems—Winnt 4.0 and up, WinME, Win2000, Win2000 server, Solaris, Linux, Unix

Honors
* Member of the Honor Society at I.T.T. Technical Institute
* Highest Honors awards

References
* Furnished upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 451 to 500 of 945)

Go to Search Parameters...

Brief Description

Diesel mechanic/ Fitter 20 years mining experience

To abtain a position as a technition, or maintenance employee. Skills are mostly Mechanical and Recovery for wheeled vehicle, Heavy and light. Also over 6 years in the US Military

Find a job in the mining industry to continue using the broad knowledge of mining techniques that I have; and learn new ones.

Concrete plant operator, concrete mixer driver, semi-dump truck and some flatbed experience. Also site supervisor with end loader and skid steer experience. Many years of welding, machining, and maintenance duties.

I am a Red Seal certified Heavy Duty Mechanic. For the past ten years I have been employed with Douglas Lake Equipment first as Field Service Technician then moving up to Parts and Service manager.

Heavy Equipment / Crane Mechanic / Welder

Mechanic; Hydraulic Tech; Crane Operator - Mechanic; Detroit & Allisson Transmission Mechanic

I've been around heavy equipment since I was young, working on cash crop farms and then construction equipment like lift trucks, dozers and pay loaders , and now want to re-enter the work field in what I know best and enjoy the most.

Looking to start my career in the mining industry as a 2nd year heavy duty mechanic in the summer of 2004. I will be graduating from Assinibione Community College with my level 2 certificate in heavy duty, farm, and transport.

I have 18 years experience in the oil field on drill rigs also have 10 years experience as caterpillar mechanic I have computer, construction,electrical,plumbing skills and I am very safety minded

Electrician - Certified

Welder or Welder Supervisor

In response to this, please consider my PROJECT BASED resume for Instrumentation positions pertaining to your need.

Trade Qualified Boilermaker(Heavy Fabrication) 10years Exp, Proficent at MMAW, GMAW, FCAW welding process, Air-Arc Gouing. Tickets include: Forklift, Working at Heights, EWP.

Seeking a full time position as a mid level or journeyman welder.

Seeking employment in open pit or quarry work as a heavy duty repairman

Mechanical Fitter, Mining Experience, Various Machinery Tickets.

Experienced Design Engineer

Been supervisor of a small rock crusher for over 2 years. Worked in mining for 4 years; experience: loader, backhoe, dozer and a little trackheo, and a jawed crusher. Perform maintance and upkeep of plant

I am a licensed Heavy duty mechanic trained and certified in Canada. I have extensive oil field/drilling experience. I am trained in Caterpillar natural gas compression products. I have extensive supervisory experience as well.

Heavy Equipment Operator: Operated Heavy Equipment in a safe and effective manner in order to minimize the risk of injury, property damage or loss of life.

Operator - dozer,loader, excavator, shovel, backhoe, drill I can operate large or small equipment I have machinest experience I have been general manager of surface mine in charge of all operations currently operate my own equipment in excavating business

An experienced security professional with 24 years of strong corporate security and law enforcement qualifications who has demonstrated a high level of success in a variety of significant and highly critical assignments in a fast paced environment. Also has an impressive track record of hands-on exp

3) One year course in operation and maintenance of Heavy Earth moving Hydraulic equipment like Bulldozers. Pavers JCB sensor paver etc. experience in operation and maintenance of bulldozers J.C.B. writgen surface miners sensor paver etc.

Channel sales, Institutional sales, Oem sales, Business development, International sales

Repair and Maintenance, Product Quality Analyst, electrical fault analysis, acceptance testing, interpret drawings and schematics, advanced vibration, reliability growth testing, precise measuring equipment, tester platforms (Teradyne, Polaris, Fusion), power supply adjustment and replacement

Software Developer .NET, Java SQL

Instrumentation I&C DCS Technician

As a skilled excavator operator in most fields presently holding CPCS operators card at NVQ level

Contracts Manager

Process Plant Manager, Metallurgical Management, Production Manager, Chief Sorter and Certified Flow-Sort X-Ray Machine operator.

Procurement, Materials and Logistics Manager (SCM): 20 years international experience in gas & oil and energy projects.

Looking for Heavy Industrial Fitter/Mechanic type role - me with 5years experience - worked on Caterpillar, Komatsu, Hitachi, O.K etc. I am seeking employment in QLD, NSW or oversea, available to start at the end of this week and willing to relocate worldwide. Committed, reliable, and ready to go.

Looking for management position in mineral (gold and precious metals) exploration and environmental engineering consulting.

Previous warehouse work..good hard worker ,fast learner

A proactive leader with extensive reliability centered maintenance management and hands-on experience in the repair, overhaul and troubleshooting of mobile equipment, initiate change and reengineering of quality improvement processes while maintaining a positive, safe and productive environment.

Multi skilled and flexable. Highly experienced mechanical fitter presently contracted to ITT Systems Division, Kuwait. More than 12 years overseas experience, working in Europe and the Middle East.

Supervision, planning, scheduling, coordination, maintenance (prevantive & breakdown), budgeting/forecasting, optimum inventory management, resource development & deployment, utilities etc.

29 years experience in all phases of building trades construction. I have specialized in residential plumbing, new construction, repair, renovation and commercial pipefitting.

Highlight: Thirty-Six Years Continued Experience in the petro-chemical, power generation, mining and commercial industrial sectors, working with several major companies at various levels of responsibility in the procurement/supply/distribution/and management of materials.

Very experienced explosives engineer, with account and man management experience. Former regional manager of the UK,s foremost explosives supplier. Experienced in mining and construction projects.

To obtain a challenging position that utilizes proven experience and skills.

Underground Miner: Miner, quality control inspector, shifter, lead man, hoistman. Shaft & drift, jackleg & jumbo, track & rubber tire.

Licenced Electrician, Refrigeration Mechanic, Qualified Fitter and Turner, Cert 4 Assesment and Workplace Trainer, Workplace Health and Safety Officer. Trade foreman

Mechanic/Welder Field, shop, underground

Well qualified Tunnelling professional with broad experience in several technical key areas like microtunneling,dewatering,piling and CCTV sewerage inspection includes management,administration and team building skills in Project Management, troubleshooting, execution in Infrastructure industry.

laboratory, mechanical, electrical, computer, supervisory and leadership skils

Grader Operator at Stillwater Mining Company. Have 2 years experience in underground road construction.

I have 10 total years in the environmental field ranging from conducting historical research on irrigation and water use in 17th and 18th century New Mexico to conducting site investigation field activities, including soil and ground water sampling and monitoring well installation, conducting enviro

Underground miner / operator

1 2 3 4 5 6 7 8 9 [ 10 ] 11 12 13 14 15 16 17 18 19

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out