Resume - team player, I can work safely even with minimal supervision. proficient in in ...

Misco Jobs

Resume #79570

CONTACT INFORMATION:
View contact information...

OBJECTIVE: To upgrade my knowledge and skills or to learn more innovative techniques in diamond drilling in both underground and surface operation as well as in oil drilling.

PERSONAL INFORMATION:
Date of Birth: 2 January, 1972 Age: 37years
Place of Birth: Lepanto, Mankayan, Benguet Sex: Male
Religion: Anglican Civil Status: Married
Weight: 160lbs Height: 5'7"

WORK EXPERIENCE:
POSITION/OCCUPATION: Driller
Date of Employment: March, 2007 to December 2008
Company Name: Boart Longyear Pty. LTD.
Address: 919 Marion Road, Metchell Park, SA. 5043
Duties & Responsibilities
- Insure the safety of the drill crew.
- Ocular inspection of Drill rigs and site safety.
- Rig Site Prestart inspection, Condition Drill Rig Refill Oil and fuel if needed
- Prepare/checkup and setup drilling materials.
- Checkup the whole situation of the out going core recovery to the core bottom.
- Drilling
- Carryout or perform related jobs assigned by my supervisor from time to time
Machines Operated:
- LM 75, LM 90, LMA 90
AWARDS: Recognition of Safety Performance

POSITION/OCCUPATION: Driller
Date of Employment: January 2004 to December 19, 2006
Company Name: Diamond Drilling Corporation of the Philippines
Duties & Responsibilities
- Ocular inspection of Drill rigs and site safety.
- Rig Site Prestart inspection, Condition Drill Rig Refill Oil and fuel if needed.
- Prepare/checkup and setup drilling materials.
- Checkup the whole situation of the out going core recovery to the core bottom.
- Drilling
- Carryout or perform related jobs assigned by my supervisor from time to time.
Machines Operated:
- LM55, longyear 38 and 44
- Atlas Copco – Diamic U6

POSITION/OCCUPATION: Data Analyst
Date of Employment: February, 2000 to December 2003
Company Name: Christian Children's Fund, Inc.
Address: Masla, Tadian, Mountain Province
Duties & Responsibilities
- Insure that all monthly report from the areas are submitted on time.
- Consolidate the monthly reports and prepare the quarterly accomplishment reports and annual comparative report.
- Write or create software for the organization
- Community organizing
- Trainor on Project Management
- Assist in the preparation of annual plan and budget
POSITION/OCCUPATION: Driller
Date of Employment: May1998 to January 2000
Company Name: Diamond Drilling Corporation of the Philippines
Address: Lepanto, Mankayan, Benguet
Duties & Responsibilities
- Ocular inspection of Drill rigs and site safety.
- Rig Site Prestart inspection, Condition Drill Rig Refill Oil and fuel if needed.
- Prepare/checkup and setup drilling materials.
- Checkup the whole situation of the out going core recovery to the core bottom.
- Drilling
- Carryout or perform related jobs assigned by my supervisor from time to time.
Machines Operated:
- LM55, longyear 38 and 44
- Atlas Copco – Diamic U6

POSITION/OCCUPATION: Driller Assistant
Date of Employment: May 1997 to May 1998
Company Name: Diamond Drilling Corporation of the Philippines
Address: Lepanto, Consolidated Mining Company
Duties & Responsibilities
- Ocular inspection of Drill rigs and site safety.
- Rig Site Prestart inspection, Condition Drill Rig Refill Oil and fuel if needed.
- Assist in the Preparation/checkup and setup of drilling materials.
- Assist in Drilling.
- Carryout or perform related jobs assigned by my supervisor from time to time.
Machines Operated:
- LM55, longyear 38 and 44
- Atlas Copco – Diamic U6

POSITION/OCCUPATION: Maintenance officer (General Services) Partime
Date of Employment: November to March 1996
Company Name: Episcopal Diocese of North Central Philippines
Address: 358 Magsaysay Avenue, Baguio City
Duties & Responsibilities
- Plumber, Electrician, Carpenter
- Carryout or perform related jobs assigned by my supervisor from time to time.

POSITION/OCCUPATION: Auto Diesel Mechanic
Date of Employment: 1990 to 1993
Company Name: Kabunian Motor Works
Address: Km 8 Camp Dangwa, La Trinidad Benguet

Duties & Responsibilities
- Overhauling light vehicle (diesel Engine)
- Perform all Under Chassis repairs
- Welder/ Fabricator

EDUCATIONAL ATTAINMENT
Educational level: College
Course: Bachelor of Science in Information and Computer Science
Year: 1993 to 1997
School: Baguio Colleges Foundation/ University of the Cordelleras

Educational level: Vocational
Course: Auto Diesel Mechanic
Year: 1989
School: Baguio School of Arts and Trade

Educational level: Secondary Education
Year: 1985 to 1989
School: Lepanto High School

Educational level: Secondary Education
Year: 1979 to 1985
School: Lepanto Elementary School

Other skills:
Driving, Computer Programming, Farming, Painting, Welding/fabrication.

Training Acquired:
Senior First Aid - MediAide Emergency Training Australia
Safe Working at heights – Safety and Rescue Australia
Under ground 4 wheel driving - BHP Olympic dam Australia
Strong spine. - Boart Longyear PTY. LTD.
Task Hazard Analysis(THA) - Safety and Rescue Australia
Risk Assessment - Safety and Rescue Australia
Isolation/tag out lock out - Safety and Rescue Australia
Underground site induction.- BHP Billiton, Olympic Dam, Australia
- Explosive Awareness
- Behavioral Based Safety(BBS)-
- Manual handling-

Project management: Christian Children's Fund, Inc.
Strategic Planning: Department of trade and Industry/ CCF
Project Development Writeshop: Department of Social Wilfare and Dev't
Database Management: Christian Children's Fund, Inc.
Case Management: DSWD/ Christian Children's Fund, Inc.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 51 to 100 of 938)

Go to Search Parameters...

Brief Description

Heavy Equipment Technician - Canadian Interprovincial Journeyman - 20+ years experience in truck and coach, heavy equipment, and diesel engine repairs. For the past 14 years have been heavy equipment technician for a John Deere Dealer.

Automotive Electrical Fitter Trade – covering Heavy/Duty mining and agriculture equipment working on Cat equipment and assorted mining equipment on sites in southern cross WA

A 30+ years experienced mining equipment maintenance manager. Working on projects in the USA and overseas in positions from mechanic to manager in underground and open pit mines.

Water well driller, TH60, T4, CP RT1800, Air & mud rotary, DTH, Under reaming

Over 18 yrs underground const. & mining experience. Roof support & bolting, ventilation, and direct supervision of employees. Current mine foreman/examiner certificates. Working knowledge & understanding of MSHA regulations. Teach, practice & enforce safety. Strong work ethics & leadership skills

Can operate machine tools for cutting metals and forming metals, mechanical technician

Multi-skilled artisan with 24+years mining experience.

Mine surveyor with eight years experience in carryout surveys for open pit mining.

I have over 19 years experience as a qualified maintenance/diesel fitter working in both gold mines and various workshop based jobs and more recently as a Mechanical Supervisor in Africa. During my last and previous roles I have been in supervisory positions.

Heavy Equipment Mechanic

Trade Skill: Tradesman in Heavy Duty Diesel Fitter/Mechanic

NCC in Diesel Plant Fitting- repairs to vehicles, engine overhauls, troubleshooting, planned maintenance, preventive maintenance

I have been a electrical/electronic repair for over 15 years. I can repair anything electricial

mining work on heavy eg.

20+ Years of experience in drill and blast procedures

Quality control inspector

Qualified Welder, Specialised Welding, Semi skilled Boilermaker, Line boring, Supervisor, Jnr. Plant Operator

Skills: Shift Supervisor, Air Jumbo, Electric Hydraulic Jumbo, Remote Control Electric and Diesel Scoops, Haulage Trucks, Boart Long Hole Drilling, Blasting, Jack leg, Rock Bolting, Cavo, Timbering, Staging, Slusher, Development, Raise Mining, Mine Rescue, Fire Fighting, First Aid

Over twenty one years experience as Heavy Duty Mechanic, seventeen years with underground mining contractors. Over eleven years experience as Master Mechanic and Lead Hand.

I am a experienced industrial electrician/electrical supervisor of fifteen years. My electrical experience is in the mining and rolling mill industries. I also Possess my MSHA and West Virginia electrical certifications up to and including high voltage for underground and surface work.

I am applying for a Maintenance Supervisor, Chief Mechanic or Rig Mechanic position. Please see my attached C/V. I am very interested in working offshore but have 7 years experience on land rigs. I do have my BOSET course and have updated my other certificates. I realize that I don’t have the offsho

March 24, 2007 Electrical Technician / Electrician

Mobile Equipment Maintenance position sought. I am a Mechanical Engineering Technologist as well as a certified Heavy Duty Mechanic with over 30 years of experience. I have excellent trouble shooting skills in hydraulics, electrical, and mechanical systems.

Internationally Experienced Heavy Equipment Mechanic - Workshop Supervisor

I can maintain, repair, disassemble & rebuild any piece of Heavy Equipment, Mining, Drills, Scoops, Shovels, loaders, dozers, Tractors, earth moving equipment, on & off road, transport trucks & trailers, logging, forestry, & construction. Propane, Diesel, Gas, Electric, and Hydraulics,& more

over 10 years experience in electronic and over 2 years offshore electrical.

Exploration Geologist and well aquented with the mining and Exploration Software , almost 4 years of experiance. in Mining and Exploration.

Eqiupment Operator Open pit mining Haul Trucks 100ton to 330ton Tigers Dozers 10+ years big mining operations on dumps, high walls, and P&H shovel floors.

Welder ***16 years of Experience*** Incredibly Hard Worker

Working as a Rig Mechanic in 2000HP, 1500HP Rigs, Both Kelly drive and Top drive systems

Caterpillar 3516,789,793 haul truck and support equipment mechanic and supervisor,associate degree and teams management training

Mechanic,Electrical Foreman

20 years of construction and equipment operator and house and equipment repair

Jounyman Heavy Equipment Mechanic

16 YRS OF MINING operating varies types of Equipment dedicated to what I love

A dedicated heavy equipment operator with 15 years of open pit mining experience. Supervised the daily production of sand plant operations. Including the harvesting, processing and staging of open pit materials. Experience working with numerous soil types.

Geologist and mineralogist (double degree, diploma). 1 year experience in mapping, supervision (rig and camp), underground, grass root exploration and production.

19 yrs of hard rock mining experience (ie: copper, gold) as well as diamond mining. Will adapt to most enviroments and willing to work overseas; will reply to all responses. Sincerley Stu Hogg

Training and trade testing of apprentices

Heavy Equipment Operator

I have 8 years experience in a large cement plant where I was a Millwright for 6 years. I also was a leader of the Safety Committee and I have a strong knowledge of the MSHA regulations

I am looking for a position which carries high impact as well as new challenges.

Worked surface mining 14 years heavy equipment

team player, I can work safely even with minimal supervision. proficient in in underground and surface drilling.during my last employment i was awarded with safety performance recognation.

Mining experience 20 yrs. Leader in all facets of underground mining,stope drift and timber leader. Jumbo jackleg stoper, heavy equipment truck to 40 ton tamroc jumbo, common core, Ontario mining certificate, various safty certificates, mine rescue certificate.

Presently have 32 years of sawmill and planner mill experience Operated all heavy equipment involved with lumber operation Safe work habits witch are indicated by 1 incident in 32 years Excellent mechanical knowledge

A dedicated, committed individual who is both practical and adaptable positive and versatile a self-starter with an ability to motivate individuals to achieve results a team player.Years of experience in the industry, wanting owrk overseas. flexible and reliable

MSHA Qualified Electrician, Part 77.103 since 1993/ Instrumentation/ HVAC

Having 14 years of work experience in Ship Building/Repair, Petroleum and Mining industry in both Philippines and Dubai (UAE).Worked as Insulator, Tinsmith, Pipe fitter, Fabricator and CAD Operator for mechanical and structural works. Used AutoCad Software as drafting tool.

Mechanical fitter, heavy engineering, worked all over africa, currently in mali, knowledge of hydraulics and pneumatics, work on winders mills etc laser alignment

1 [ 2 ] 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out