Resume - Lead Electrical Outage/Project Planner, Senior Electrical Planner, Mechanical Su...

Misco Jobs

Resume #80249

CONTACT INFORMATION:
View contact information...

PERSONAL INFORMATION:
Date of Birth: February 19, 1955
Place of Birth: Benton Harbor Michigan
Citizenship: USA
Passport: Yes
Visa Status: None
Gender: Male
Marital Status: Married

EXPERIENCE SUMMARY:
Over thirty three years of diversified experience as Lead Electrical Outage/Project Planner, Senior Electrical Planner, Mechanical Supervisor, Safety & Environmental Manager, OSHA Certified Instructor, QA Supervisor, QC Field Supervisor and Lead Electrical Inspector. Maintenance Planning Software includes PIMS, Ventyx/INDUS (Passport Portal G and J), Primavera P3, Word, and MS Project.

ACCOMPLISHMENTS:
Senior Planner:
- Member of organization (Work Control) that led DC Cook Nuclear Plant in obtaining an INPO 1 rating in one fuel cycle (from an INPO 3 rating - an industry first) by reducing backlog of corrective maintenance work orders to top quartile.

Environmental & Safety Manager:
- Inherited Clean Air Act compliance issues resolved without litigation or fines
- Developed an environmental program that was recognized as a leader in Pollution Prevention efforts by the Michigan Environmental Council, Michigan Department of Environmental Quality, and the Print Industries of Michigan
- Registered (and sold) VOC Emission Reductions Credits in the Michigan Open Market Trading Program
- Charter member of the Michigan Great Printer's Project
- Developed many close working partnerships with State of Michigan MIOSHA and DEQ representatives
- Initiated and led strategies that resulted in reductions of direct medical costs by 50%, Medical OSHA Recordable) rates by 30% and Lost Time rates by 41%
- Developed Environmental and safety program of company with 1100 employees from non-existent to one that was recognized for its accomplishments by the State regulators and National Environmental Groups
- Developed and led Pollution Prevention initiatives that reduced VOC emissions by 60 tons annually

Procedure Writer
- Developed all initial installation and modification procedures (where none existed) for all new construction and modification activities at the DC Cook Nuclear plant for the civil, electrical, mechanical/piping, welding from "tribal knowledge", codes, site specifications etc.

LANGUAGES
English (US) – Fluent
Italian - Beginner

EMPLOYMENT HISTORY:
March 2005 to Present: SUN Technical Services, Inc.
Lead Electrical Outage/MOD Planner * DC Cook Nuclear Plant
Using VENTYX/INDUS (Passport J) and MS Word, planned electrical, I&C and HVAC preventative maintenance, corrective maintenance and design changes. Performed field walk downs to identify and resolve job hazards, installation problems and to identify support work such as temporary power, scaffolding, etc... Worked with Design Engineers, Procurement Engineers and System Engineers as needed solving installation issues. Researched drawings, specifications, vendor manuals, maintenance history and change documents to ensure work was planned and performed per applicable codes and plant requirements. Ordered equipment, materials and parts as needed, updated BOMs and initiated Engineering Evaluations and work permits as required. Wrote detailed job sequences identifying critical parameters to ensure the successful execution of the task or project. As a Lead and Senior Planner other Planner's work was reviewed for completeness, accuracy and that the task could be successfully performed as planned. Trained planners on INDUS and the DC Cook work control process. Modifications worked included Digital Turbine Controls, Power Uprate (MSRs), Supplemental Containment Cooling, RTD Bypass, Reactor Head replacement.

February 2005: Babcock & Wilcox
Modification Project Electrical Planner * Quad Cities Station
Using Passport J, planned outage corrective maintenance and design change electrical work activities through field walk downs, researching one-line, elementary drawings and wiring diagrams, ordering materials and interfacing with the Design Group and engineering organizations as needed. Using Word wrote detailed job sequences identifying critical parameters that ensured successful execution of the task or project.

July 2004 to December 2004: SUN Technical Services, Inc.
Senior Electrical Planner * DC Cook Nuclear Plant
Using PIMS (NPM) and Word, planned electrical and HVAC preventative maintenance, corrective maintenance and design changes. Performed field walk downs to identify and resolve job hazards, installation problems and to identify needs such as temporary power, scaffolding, permits, etc. Worked with Design Engineers, Procurement Engineers and System Engineers as needed solving installation issues. Researched drawings, specifications, vendor manuals, maintenance history and change documents to ensure work was planned and performed per codes and plant requirements. Ordered equipment, materials and parts as needed. Wrote detailed job sequences identifying critical parameters to ensure the successful execution of the task or project.

May 2004 to July 2004: NESTLE USA
Safety & Environmental Head (Manager)
Managed the safety, emergency plan, training and environmental programs of a half-million square foot facility with over 450 union associates with oversight over process safety management, ergonomics, Job Safety Analysis, control of hazardous energy, confined space, storm water, air emissions, hazardous waste, contractor safety, material handling, etc.

April 10-17 2004: NIC
Electrical Quality Inspector (ANSI N45.2.6 Level II) * Browns Ferry
QC Training

March 2004: Atlantic Group
Electrical / I&C Quality Assurance Inspector (ANSI N45.2.6 Level II) * St. Lucie Unit 1
QA Surveillance and oversight on modifications and updates to instrumentation systems in the control room (fiber optic Foxboro power supplies and input/output and communication modules).

October 2003 to December 2003: * SUN Technical Services, Inc.
Safety Root Cause Analyst * DC Cook Nuclear Plant
Safety expert on a team performing a PII root cause analysis of a commercial diving accident at the Donald C. Cook Nuclear Plant in Michigan. As a part of the Root Cause investigation the client's safety program, culture and risk assessment process were evaluated with recommendations for effective corrective actions.

December 1995 to July 2003: IPC Communication Services
Safety & Environmental Manager
Responsible for the safety, environmental and security programs of six facilities in four states (Michigan, California, Tennessee, and Texas). Developed initial written company policies and procedures needed to ensure compliance with government safety and environmental regulations (MIOSHA/OSHA, NESHAP, AHERA, DOT, CWA, CAA, CERCLA, RCRA and EPA/Michigan DEQ). Monitored employee work practices and coached employees to recognize unsafe behaviors. Developed company-wide Business Continuity and Emergency Plans and managed the company's high tech OEM customer security programs for our software products.
- Authorized OSHA Certified Instructor (General Industry Safety Standards - 29CFR1910)
- Authorized OSHA Certified Instructor (Construction Safety Standards - 29CFR1926).
- Performed Job Hazard Analyses of work sites and of monitored employee safe work practices.
- Maintained MSDS program.
- Negotiated service contracts (security, hearing exams, regulated hazardous waste, used oils, etc.)
- Performed "New Source Reviews". Prepared and submitted 'Air Permits to Install' for new equipment.
- Prepared and submitted EPCRA/SARA Toxic Chemical Release Reports and Tier II Reports
- Emergency Coordinator for Business Continuity Plan, Emergency Plan, and Fire Emergency Plan

February 1995 to June 1995: NISCO/AQA, Inc.
Mechanical Supervisor * DC Cook Nuclear Plant
Supervised union sheet metal workers, ironworkers, carpenters and laborers during refueling outage. Monitored activities in the field to keep projects on track. All work was finished ahead of or on schedule and per outage milestones. Ensured work was in accordance with applicable codes, customer procedures and specifications, per approved design documents and in the safest, most cost-effective manner. Completed work walked down for completeness and as-built documentation prior to obtaining quality inspections and acceptance.

December 92 to June 1995: NISCO/AQA, Inc.
QA & Safety Supervisor * DC Cook Nuclear Plant
Audited and performed surveillance of welder qualification and weld procedure qualification tests for compliance to AWS D1.1 and ASME Boiler & Pressure Vessel codes and reviewed welder qualifications and weld procedures qualifications for acceptance per AWS D1.1 and ASME B& PV codes. Managed OSHA Safety program, establishing policies and procedures along with conducting training as needed to ensure compliance with all OSHA and MIOSHA, NESHAP, AHERA, and EPA regulations.

January 1991 to October 1992: Raytheon/UE&C-Catalytic
Procedure Writer * DC Cook Nuclear Plant
Developed initial written AEP Construction Department's electrical, mechanical, ISI. ASME Section XI, civil and structural procedures. Performed 10CFR50.59.e reviews and co-chaired the Design Change Compliance and Design Change Close-Out task teams.

June 1987 to January 1991: Raytheon/UE&C-Catalytic
QC Inspector: Level III Electrical, Level II: I&C, Structural, Visual Weld * DC Cook Units 1 &2
Trained, tested and certified Level I/II electrical inspectors, inspected all phases of electrical work from embedded installations to equipment pre-operational testing. Reviewed completed Job Orders for final acceptance.

April 1987 to June 1987: Basin Engineering
QC Inspector: Level II Electrical/I&C * Trojan Nuclear Plant
Performed EQ inspections on MOVs. Inspected Raychem splices, cable pulls, control room panel and MOV wiring modifications. Witnessed MOVATS testing of MOVs.

October 1986 to March 1987: Nuclear Energy Services, Inc.
QC Inspector: Level II Electrical, I&C, Mechanical/Piping, Visual Weld * Three Mile Island Unit 1
QA oversight of motor operated damper functional testing and Start Up/Pre-Op tests of the ESF ventilation system. Performed inspections on Technical Specification Surveillance Tests and I&C calibrations (bench/loop) of Foxboro multiplier, summers & signal characterizer modules, effluent radiation monitors, transmitters, transmations, level and pressure indicators, flow meters, chlorine detectors, etc. Also inspected Appendix R work & TSI thermolag installations, flamastic coatings, etc..

July 1986 to August 1986: R. A. Weirich & Associates
QC Inspector: Level II Electrical * LaSalle County Station
Performed inspections on Raychem splices and Okonite taping on MOVS, solenoids and Conax ESCAs.

December 1984 to April 86: Butler Service Group, Inc.
QC Inspector: Level II Electrical, instrumentation &Control * Clinton Power Station
Performed surveillances and inspections on the calibration (bench/loop) and maintenance of transmitters, transmations, pressure and level indicators, optical isolator cards, PCBs, flow meters, radiation monitors and associated instrument lines (impulse, pneumatic, signal and ample). Performed inspections and surveillances on the maintenance and rework of Limitorque valve operators, Hydramotors, solenoid valves, switchgear/MCCs, diesel generators, electrical penetrations and various electrical components.

November 1982 to November 1984: Butler Service Group, Inc.
QC Inspector: Level II Electrical, Instrumentation & Control * Enrico Fermi Unit 2
Inspected Hangers, conduit, tray, cable installations and terminations. Inspected control rod drives and control rod position indicating probe work. Performed Quality Engineering reviews on electrical and I&C work packages prior to issuing for work to assign witness and hold points and to identify necessary inspection procedures and checklists to verify work. Reviewed 10% of all test packages assigning witness and hold points, reviewing the remaining 90% of test packages after testing for acceptance of test results.

April 1982 to November 1982: Henry J. Kaiser Co.
Lead Electrical Inspector: Level II Electrical, Visual Weld * Zimmer Nuclear Power Plant
Working Assistant Lead Electrical Inspector performing inspections on electrical installations; anchors, hangers and raceway. Welds inspected per ASME B&PV code, ANSI B31.1, AWS D1.1 and AISC. Provided direction to three electrical inspectors in the drywell/wetwell areas of the plant.

October 1981 to March 1982: Ebasco Services, Inc.
QC Inspector: Level II Electrical, Instrument & Control * WPS 3
Performed surveillance on several subcontractor electrical installation and inspection activities, assuring compliance to their procedures, specifications, codes and standards and acceptance reviews of installation, welding and inspections procedures to AWS D1.1, ANSI and IEEE. Reviewed completed inspection records and work packages for acceptance and close out.

September 1980 to September 1981: Lord Electric Co.
Lead Electrical Inspector: Level II Electrical * WPS 3 & 5
Supervised the inspection activities of five electrical inspectors, assuring in-process installations were inspected and documented in a timely manner. Assisted the QC Manager in initiating and revising installation and inspection procedures. Also, performed indoctrination and training of inspectors.

May 1978 to July 1980: Fischbach/Lord Electric Co.
QC Field Supervisor: Level II Electrical, Visual Weld * WPS 2
Supervised twenty five electrical and weld inspectors. Coordinated with Construction Management to provide QC coverage as required to support their activities and schedules. Interfaced with the Client and Construction Management to resolve any perceived quality program deficiencies and quality concerns.

February 1978 to May 1978: Bechtel Power Corporation
QC Inspector: Level II Electrical * Palo Verde Nuclear Generating Station
Performed inspection on embedded electrical installations.

January 1976 to February 1978: L. K. Comstock & Company, Inc.
QC Inspector: Level II Electrical, Visual Weld * Fermi Unit 2 & DC Cook Nuclear Plant
Performed inspections of welds per AWS D1.1 and on conduit and tray installations. Witnessed cable pulls and inspected cable terminations and splices. Worked with the Westinghouse representative verifying the installation of the full and part length coilstacks into the reactor head (DC Cook Unit 2).

EDUCATION:
1973 Graduate St. Joseph High School, St. Joseph, Michigan 49805
1981 Transformers and AC circuits – Ebasco Services, Inc.
1981 Welding Principles – Ebasco Services, Inc.
1986 MOVATS Signature Analysis Systems – MOVATS Inc.
1986 Thermal Lag Coatings – TSI, Inc.
1991 Leadership & Team building – AEP Electric Power Company
1993 Asbestos Abatement Contractor Supervisor – WMI Educational Services
1994 HUD Guidelines on Metallic Lead Abatement – WMI Educational Services
1994 Asbestos Abatement Supervisor Re-qualification – WMI Educational Services
1994 OSHA Certified Instructor Construction Industry Standards – Dept. of Labor OSHA Training Institute
1996 Air Permit to Install workshop - Michigan DEQ
1996 Hazard Waste Management - Environmental Resources
1999 OSHA Certified Instructor General Industry Standards – Eastern Michigan University
2001 Process Improvement – Southwestern Michigan College
2002 Ergonomics - University of Michigan
2002 Critical Materials & Wastewater Discharge Reports - Michigan DEQ
2003 ISO14001, Michigan DEQ and Honda Manufacturing
2004 OSHA 30 Hour Course "General Industry" – Nestle University
2005 Industrial Suite (Passport J) Training – DC Cook
2005 OSHA 10 Hour Course "Construction" – DC Cook
2006 Industrial Suite (Passport J) Training – DC Cook

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 651 to 700 of 944)

Go to Search Parameters...

Brief Description

Eight (8) years experience as heavy equipment operator local and overseas

Mark up Leading hand, Blast crew member, Westrain Plant Operator Training Course

My technical specialty lies in installation, troubleshooting and repairing Electrical, Mechanical, Automation production problems. I can install conduit, cable tray, main panels, and sub-panels, distribution transformers, ground systems and, wide variety electro-mechanical devices

Safety Professional with over 25 years experience and dedication to the industries with a Safety first and foremost attitude.

I am a qualified artisan skilled in hydraulics and heavy duty equipment, currently working as a product specialist and studying towards a mechanical engineer diploma.

Geologist with Exploration Experience

Journeyed Industrial Electrician

NEBOSH Certified HSE advisor, HSE Trainer, Tech-IOSH member

Interested in Industrial Instrumentation Mechanic Apprentice Position: Currently have the following safety courses: H2S Alive, CSTS, First Aid, Confined Space and High Angle training, WHMIS, Firefighting Technical Certificate.

PLANNER SMELTER

I have been welding for 3 years

Lead Electrical Outage/Project Planner, Senior Electrical Planner, Mechanical Supervisor, Safety & Environmental Manager, OSHA Certified Instructor, QA Supervisor, QC Field Supervisor and Lead Electrical Inspector

Vast array of critical experiences. Operate both independently (single remote site medic) or team (advance life support ambulance service). Disaster management, coordination skills (patient, scene & bystander safety) during crucial events. Coordination of multi-disciplinary emergency services (fire,

15 plus years experience in tool and equipment management, warehousing, materials management. Dependable, reliable and honest. Looking for long term employment.

Retired PAF personnel having 25 yrs of experience and also remianed as instructor.

Currently working as the Service Manager for the CAT dealer in Papua New Guinea, Tabubil branch. There are 56 employees in the service department and the branch takes care of up to 40% of HD PNG earnings.

Heavy Equipment Operator (Certified)

My 19 years of experience reflect 13 years of project detailed engineering as a Control & Instrumentation Engineer and 4 years in maintenance and upgrade projects in a reliability based environment, applying amongst other the following typical standards and practices: ANSI, IEC, BSA, DIN, API

SAP FICO consultant with 10 years experience

Seeking Chemist or Laboratory Technician Position-will relocate

Research Thesis on ANTENNA/RF

Plant operations supervisor / trainer, remote overseas locations

25 yrs Heavy diesel mechanic in Construction and Pipeline

Heavy Equipment operator

Experienced excavator operator on most models of machine up to 80 tonnes. Expierinced in both Civils and Demolition. I am willing to work over seas if needed.

Geologist with background experience in Mining and Exploration of mineral resources- gold and base metals. QAQC for sampling projects. Ability to prepare technical Exploration reports for Project Managers incl drilling proposals.MapInfo, Micro-Mine, Vulcan, MP3, MS-packages.Ore reserve calculation

I have been working as a Computer Technician for the past two (2) years. I received eight (8) CXC subjects and BSc. in Electronics and Communications from the University of Technology. I also have two (2) years engineering related experience working with TCom/Huawei Technologies/CLARO.

Multi-skilled operator, decision making

Logistics, shipping and Offshore Assistant

Driven by innovation and integrity as a member or your technical group I will be able to provide technical drafting support using the latest version of Microstation, Intergraph, Auto Cad and other GIS, ICGS software platforms. In addition, perform non-routine and complex drafting assignments, Coordi

Ph.D. in materials science and engineering, four year experience in teaching, five year experience in working in various industries. Fields of specialty; corrosion, coating, materials selection

I have 12 years experience in the South African Police ( VIP Protection , Access Control , Cime Prevention , Investigatins ) , 3 Years experience in The Private Security Industry ( Regional Manager ) and 1 year experience in conflict zones ( Baghdad , raq as a Mentor / Advisor )

Specialized in International Human Resources, I am currently in Dubai responsible for personnel management in a multicultural environment. In France, I also actively participated in Rio Tinto Alcan to the setting up of a European HRIS.

I started my career in 1991. I am a qualified fitter & turner (trade) Currently working as a workshop foreman. Did courses in inspection (QC) and management.

I have been involved in developement and implementation of various safety programs and helping create safety cultures within organizations on and off the job. My most recent assignments have been in UAE and Mexico as a HSE Manager and I would like to continue in this role.

I am Proficient in Process Modeling/Simulation and Oil & Gas Production Optimization using Nadal Analysis (SAM, PERFORM, PROSPER). I have experience in Oil Analysis, NDT corrosion inspection, and equipment condition monitoring.

Experienced Automation/Process Control Engineer

Master Mariner and have experience as Senior Officer on LPG Carriers

10+ Years Experience PLC Programming PC Board Testing/Repair Test Point Systems

I am interested in employment for any position where I may acquire new skills or my current skills may be fully utilized. I have experience in Crush and Convey, Leaching, Haulage, Safety and Environmental areas. Upon my employment I will bring a safe and positive work ethic to your company.

I have Masters Degree in Geology with experience in Coal Exploration.

My name is A. Pradeep Kumar, I have completed my post graduation in Applied geology from osmania university in 2004.and now I am working as a geologist in trimex international fze;dubai. I have experience in seismic processing and interpretaion,where i used soft wares life PROMAX,FECOU5.3 ,GEOGRAPHI

Qualified Instruments Technician with a National Diploma and Certificate of Apprenticeship

Free! In excess of 15 years Health and Safety experience. Strong coaching. Leadership skills and experience in BBS. Experience includes large 3D programs in all types of terrain including mountains, Arctic, and cold weather conditions.

Over 12months experience as a Field Assistant in Mt Isa QLD. Core Sampling, Gridding, RC and Diamond Drill Pads, Diamond Core Saw Operation. Willing to be trained also willing to relocate for the right position.

Survey Technician/Mapper/Drafter

Instrument Technician with Overseas Russian Experience.

Extensive working experience in Chemical Processing, Power Generation and Oil & Gas Industries. Versatile team player with an ability to incorporate new concepts and interact with all levels of professionals. Expertise in Project, Maintenance, Materials Management and ERP (SAP, MAXIMO, Primavera R3)

Over 20 years of experience in a career, dedicated to the provision of engineering services in the development of Maintenance Engineering and completing major projects. I am, most adept at successful employment in a multi-discipline environment.

Highly qualified HSE Contractor looking for overseas positions.

1 2 3 4 5 6 7 8 9 10 11 12 13 [ 14 ] 15 16 17 18 19

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out