Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #81084 next resume »»
CONTACT INFORMATION:
View contact information...

Objective

To obtain a job with your company
Work History
Crane Field Technician
Konecranes Inc, Tulsa, OK 2008 - Present
Maintain cranes at customer facilities, pm's cranes and installs of new cranes. Disassemble machinery and equipment to remove parts and make repairs. Repair and replace broken or malfunctioning components of machinery and equipment. Repair and maintain the operating condition of industrial production and processing machinery and equipment. Examine parts for defects such as breakage and excessive wear. Reassemble equipment after completion of inspections, testing, or repairs. Observe and test the operation of machinery and equipment in order to diagnose malfunctions, using voltmeters and other testing devices. Operate newly repaired machinery and equipment to verify the adequacy of repairs. Clean, lubricate, and adjust parts, equipment, and machinery. Analyze test results, machine error messages, and information obtained from operators in order to diagnose equipment problems. Record repairs and maintenance performed. Study blueprints and manufacturers' manuals to determine correct installation and operation of machinery. Record parts and materials used, and order or requisition new parts and materials as necessary. Cut and weld metal to repair broken metal parts, fabricate new parts, and assemble new equipment. Demonstrate equipment functions and features to machine operators. Enter codes and instructions to program computer-controlled machinery.

Maintenance Technician
Underwood Truck Repair, Pryor, OK 2006 - 2007
Adjusts working parts, such as fan belt tension, voltage output, contacts and springs, using hand tools, and verifies corrections, using gauges.
Assembles electrical parts, such as alternators, generators, starting devices, and switches, following schematic drawings, using hand, machine, and power tools.

Platoon SGT
Thunderbird Youth Academy, Pryor, OK 2004 - 2006
Supervise Cadets attending the thunderbird training program. Supervise 25
male cadets and 6 female cadets. I followed the Bravo SOP and work well with other cadre on my shift and all other shifts, I report to the Shift supervisor and enforce the rules and regulations and keep total control at all times.

Maintenance Electrical Journeyman
Orchids paper products, Pryor, OK 2001 - 2004
Maintain winders, wrappers. Motor controls, Variable speed Drives, Voltage 460 &
below, set up machines, maintain electrical services for all equipment.
Installation of new equipment and maintain it. Adjusts working parts. Assembles electrical parts, such as alternators, generators, starting devices, and switches, following schematic.

Heavy Machinery Mechanic
Oklahoma army national guard, Pryor, OK 1992 - 2001
Maintain military equipment and vehicles. Adjusts working parts, such as fan belt tension, using hand tools, and verifies corrections, Assembles electrical parts, such as alternators, generators, starting devices, and switches, following schematic drawings, using hand, machine, and power tools.
Disassembles defective unit, using hand tools..

Education
Pryor High School - Diploma
Orchids electrical classes, Oklahoma state university
Electrical and electronics degree

Certificates & Licenses
US Army -Heavy duty machinery mechanic (62B) Army -
Plumber/ pipe fitter (52K) Army - Combat lifesaver (92B)

Driver's License
Type: Commercial, Class A
Endorsement: Passenger
Restrictions: Air Brakes, School Bus

Volunteer Experience
I love to volunteer for my kids sporting events; I have coached soccer, baseball & football.

Military Service
Oklahoma National Guard August 1992 to Aug 2001. - Honorable Discharge.
Specialist first class - heavy Equipment mechanic.
Commendations: Merit Awards and Unit Awards.

References
References provided upon request.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 301 to 350 of 920)Go to Search Parameters...
Brief Description
Ore Handling Plant Superintendent (Alternate Project Manager); Electrical Maintenance
Mechanical Draughtsman with expirience in Automobile industry (Engine Design)
30+ yrs in heavy equipment of all types, mostly friction cranes, draglines, etc.
Electrician who posseses a wide variety of electrical knowledge
Conveyer belt: Maintaining of chutes, Transfer chutes, Box fronts, Radial doors, Hydraulic Cylinders on radial doors. Setting belt alignment. Maintenance on idlers (rollers) head pullies, Tail end pullies.
Boilermaker/welder, nonslewing crane ticket, dogman, side loading crane ticket, cert2 in fire and rescue, cert3 in mines rescue.
Front line supervisor, to train the trainer, mine development jumbo lead hand, OH@S,first aid certificate
I have multiple years of mining and heavy equipment operator experience. I am looking for a full time position.
to obtaian a job
I've been working in the diesel business for over 10 years. I do everything from general maintenance to major rebuilds. From office type work to operating equipment when need be.
I have several years of experience working in international trading (export and import), manufacturing, international shipping, and forwarding companies. During this time, I have obtained excellent knowledge of domestic and global logistics, and supply chain management.
Have a journeymen welding ticket with red seal and journeymen carpenter ticket, have extensive fabrication experience, maintenance experience in the shop and field, have worked on p&h shovels, all types of caterpillar equipment, have worked on surface open pit mines and underground hard rock mines.
I have been working in the mine industry for the past 30 years. Recently reassigned to site services for DeBeers Canada Snap Lake Project. Currently gaining experience on the several sizes of Komatsu loaders, Bobcat, Dozers, Water and Fuel Truck.
Millwright looking for a new career
Recent graduate with a Bachelor of Applied Science in Instrumentation seeking employment for supervisor positions within the instrumentation field or as an E & I Specialist.
My skills are working safely long hours and hard
heavyequiptmentoperator opcat certifed in wheel loader&dozer nuca certifed
2 Yrs underground mining. Experience in operation of a large variety of equipment, load/blast process and utilities/maintenance experience
Versatile, knowledgeable, exploration geologist
8 1/2 years experience in the U/G mining industry, majority of this time I have been diamond drilling but have experience in Supervising, Training and Longhole Production Drilling and associated mine support functions both in Australia and Zambia. Presently in WA but am willing to travel.
PROCESS OPERATOR/FIRE ASSAYER/SECURITY 1993-2001 OBJECTIVE: To obtain a position that utilizes the knowledge and experience that I have acquired.
Scaffolding & Safety
Operation experiance for some equipment, mechanical aptitude, clean drivers abstract with own vehicle, basic underground safety training
Industrial Maintenance Technician/Electrician
Electrical Foreman / Service Technician
Miner 3
4 years high school welding Classes, 2 years machine shop work including some machining and hydraulic work
i am a panel beater by trade wanting to take a on a new career
A1 grade machinist working on all machines in timber indust,tool setter and sharpener m/c setter also,4 year trained app city and guild london institute, driven most front loaders but no tickets as all in saw mills when the driver was working on other m/c. also work on contract for australia post .
5 Years with sandvik mining & construction s.a.2 Years at sandvik field services.Have been promoted as senior technician 10 months ago.qualified in the south african air force as a aircraft mechanic on the puma helicopter.i specialise in ejc 115-axera lp drill rigs.this is my passion.
Scoop operator, minitrack operator,some pinning experiance,utility work on the unit.
Mechanical maintenance equipment of all types
I have expertise in general operations, contract administration, budgeting and human resources, among others. I have years of experience working with the public, business owners, managers and government officials. In addition, I have on-the-ground experience in public works, drilling and pipelines.
Qualified and Certified NCCCO Operator with all endorsements willing to travel
troubleshoot and repair mining equipment,Electrical,hydraulic,mechanical,welding
Qualified heavy diesel machanic
More than 15 years of environmental / safety experience in mining industry; 1.5 years of experience in exploration by drilling as geologist; 2.5 years of experience in exploration by drilling as environmental / safety specialist
Free! Telecom and electronic engineer, specializing in RF, with over twenty years worldwide experience.
Seventeen yrs mining exp all equipment. Specialty dragline up to and presently operating 4600 Manatowak. Eight yrs foreman-certified Ohio.
QualificationsI have worked in the repair related field for over 23 years. I owned and ran a repair shop for the last 13 years working on both gas and diesel repairs. I managed between 10 to 15 employees year round as well as the day to day operations of the business.
I'd like to switch careers and have a get er done attitude
I am qualified on Remote Control scoops. I run haulage trucks ,cages ,skips, crushers ,conveyors,and most any underground mobile equipment.
To obtain full time employment as a heavy equipment operator in the oil sands.
15 years experience of Finance Analysis, Cost Control, Finance Reporting and Internal control experience / OIL AND GAS INDUSTRY ‘ KEY PERFORMANCE INDICATORS - KPI expert performer and designer.
I have a wide on and offshore range of experience in heavy equipment installation, commissioning and maintenance. Managing and supervising day-to-day preventive maintenance.
Designing, putting on service and managing 9 years whole logistics of implementation a national network for 10 billion clients
Underground Miner/Equipment Operator
I would like to utilize my skills as a beltman and to learn more in the coal mining business.
Pipe Fitter, Foreman, General Foreman.
11 years of heavy equipment operation and supervisory experience
1   2   3   4   5   6   [ 7 ]   8   9   10   11   12   13   14   15   16   17   18   19  
Seach Parameters

Change search parameters...
CATEGORIES: Trades/Skilled;
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com