Resume - Maintenance Superintendent with over 20 years experience in Mining and heavy ind...

Misco Jobs

Resume #83178

CONTACT INFORMATION:
View contact information...

Personal Statement

Safety is an underpinning personal value of mine. My commitment is to the safe execution of all activities and practices that I lead and am involved with. As a leader, I demonstrate a high level of commitment, credibility, perseverance and self-motivation. I communicate well at all levels and have excellent interpersonal skills. I have a track record of coaching individuals for improvement in mining and industrial workplaces.

Employment Details.. .

Position:
Service:
Facility: Superintendent Maintenance - Dampier Salt
October 2007 - present
Dampier Salt's Port Hedland operation.
This operation employs approximately 90 individuals to process 3.2 million tonnes of salt per year. The maintenance team comprises 35 personnel, 6 of whom are direct reports.

Achievements:
* Improved safety performance and awareness by the team, recording only 2 minor injuries over the last 16 months.
* Embedded the JHA, Take 5 and Safe Work Observation processes.
* Reorganised the Maintenance team to meet the needs of the business.
* Formulated key asset life plans and identified critical spares listings with min/max holdings.
* Safe commissioning of new conveyor systems and Bulk storage facilities.
* Established KPIs for the team and embedded these within the performance management program.
* Implemented and administered best practice "Lean Maintenance" principles and various "Five S" projects for mobile and fixed plant.
* Structurally and mechanically rebuilt a salt harvesting machine.
* Rebuilt Hitachi boom and bucket then changed out and rebuilt the other unit as a routable spare
* Rebuilt several road train trailers including chassis straightening/replacement
Accountabilities:
* Understand and work within Dampier Salts policies, including; Quality, Environmental, Sustainability, Fair Treatment and Communities policies.
* Promote company values such as Integrity, respecting individuals and assets, open communication and commitment by its leadership and workforce.
* Participate and action audit findings, management of detailed incident investigations to identify root cause, contributing factors and corrective actions.
* Maintained all statutory registers, as well as ensured that all mandatory inspections/tasks were actioned within their timeframes.
* Management of fixed plant maintenance assets, including 21 separate conveyor systems, wet salt product stacking, the wash plant activities, site pumping, twin boom stacker and shuttling ship loader capable of 2200 tonnes per hour.
* Management and administration of all contractor workgroups.
* Use of SAP CMMS, ensuring that all relevant information is recorded accurately and in a timely manner.
* Formulate and manage Change Management and Capital request documentation.
* Relief Site Manager as required to cover annual leave and other absences.
* Formulate and administer the maintenance budgets, (both capital and operating).
* Weekly and monthly costs review in accordance with long term planning objectives.
* Optimise plant efficiencies and operating capacity through the analysis of equipment defect modes and trends.
* Action auditable items so that they comply with site and company requirements.
------------------------------------
Position:
Service:
Facility: Manager Newman Business Unit
Sept. 2005 - Oct 2007
RCR Construction and Maintenance
This operation supplied a maintenance service to the mining industry in the Pilbara region of Western Australia. I employed and managed a workforce that regularly exceeded 100 personnel of various trades' disciplines. Of these 9 were direct reports.

Plant maintained: Conveyors, stackers, reclaimers, various sizes of jaw crushers, gyratory crushers, milling and screening arrangements, beneficiation plants, and train load out facilities.

Achievements:
* Reduced the turnover of staff by selecting and recruiting individuals who wished to relocate to the Pilbara and created an option for "family orientated" FIFO rosters.
* Improved team safety awareness and reporting requirements to reduce injuries.
* Implemented the company's training matrix and identifying skills shortfalls. Training programmes were established to cover the identified gaps.
* Commissioning of conveyor systems and dust control systems for various clients.
* Built lasting relationships with clients by consistently achieving targets and delivering projects on time, within budget and without compromising safety.
* Established and administrated the site OH&S Committee.
* Exceeded the budget profit expectations while controlling budget spend.
* Successful management of logistics to cover large shutdowns across multiple sites.
* Setup an inspection and monitoring program to gauge wear of wear liners on mobile equipment.
* Rebuilt buckets, booms and relined dump truck trays for Leibheir, BGC, Riotinto and McMahon's within costs and without incident.

Accountabilities:
* Understand and work within RCR Maintenances policies as well as various clients.
* Build and maintain relationships and trust with internal workgroups, clients and service providers, develop and mentor team members.
* Liaise with client area Planners, Supervisors and Superintendents to formulate achievable maintenance and shutdown plans.
* Onsite management of large infrastructure projects at various client operations.
* Maintain open communication and co-operation in regards to all major incident investigations and injury management cases to various clients groups.
* Performance management of all direct reports and provided support for the performance management of indirect reports.
* Provide advice, direction and projected costs to clients for maintenance and breakdown activities.
* Safe management of resources to meet peek labour demand periods while also keeping these same individuals gainfully employed during off peak times.
* Use the companies CMMS for the recording of all transactions and associated costs.

------------------------------------

Position:
Service:
Facility: Superintendent Workshop & Contracts for Fleur Australia
Jan 2005 - Aug 2005
Fleur Australia and MBFjv, Olympic Dam
Fleur and the Joint Venture supplied a dedicated maintenance function to Western Mining and later BHP Billiton. The service included supervision, planning, scaffold erection, crane allocation and management. The labour supply arrangements covered Riggers, Electricians, Boilermakers, Fitters and unskilled personnel. This involved approximately 100 staff and trades with 12 of these being direct reports.

Achievements:
* Regular shutdown organisation and management of an additional 200-300 maintenance personnel.
* Maintain a safe work culture while managing a transient and workforce not knowledgeable in specific site procedures or safety requirements.
* Built relationships with team members and developed base skills required.
* Developed relationships and trust with various client representatives.
* Gained approval and Implemented safety guard railing to all site cranes and mobile machinery, prior to it being a WorkSafe or BHP requirement.
* Gained budget approval to implement the workforces training requirements.
* Identified and successfully implemented several "Five S" type projects to change organisational culture and set a minimum accepted standard.
Accountabilities:
* Management of competing priorities regarding task execution, this was especially critical during periods of multiple unplanned outages.
* Formulation of and administration of I.T.P documentation (Inspection and Test Plans)
* Chair the daily Pre-Start meetings and fortnightly safety Toolbox meetings.
* Conduct and review daily Safe Work Observations for self and direct reports, identify concerns and highlight opportunities to the team at daily pre-start meetings.
* Formulate and review Safe Work Procedures for repetitive tasks as well as reviewing and suggesting improvements for team JHA's.
* Implement workforce training requirements to enable employees to safely and competently perform their designated duties.

------------------------------------

Position:
Service:
Facility:
Superintendent Maintenance
June 2004 - Dec 2004
Fox Resources-Radio Hill operation, Karratha
The Radio Hill operation was an old plant that had been mothballed and in a decaying state for several years. My role was to oversee the contract company performing the refurbishment of the plant equipment, then commission and maintain the operation.
This operation had a 200,000 TPA capacity for nickel refining with a total workforce of 62 individuals, 9 of these being direct reports

Achievements:
* Assisted with the development and implementation of the company's key safety values and drivers such as the Safety First and Protect your Mates initiatives.
* Refurbished and commissioned the Nickel/Copper crushing and processing plants with no lost time injuries and within budget.
* Sourced, trained and developed a strong balanced maintenance team.
* Organised the initial budget forecast for maintenance activities.
* Installed and managed the Mex CMMS and the later transition to the Pronto Maintenance software package.
* Developed preventative maintenance programmes for critical plant with specific work packs.
* Developed asset life plans for critical plant.
* Identified and maintained appropriate spares holdings for critical plant.
* The safe organising and management to allow the reline of the site Ball Mill using offsite contract personal.

Accountabilities:
* Ensure all preventative safety measures were appropriate and adequate for the tasks performed, such as JHA formulation and review, comprehensive risk assessments for complex tasks involving multiple work groups and on the job inspections using the "Protect your Mates" initiative.
* Ensure maintenance plans were achievable and had a high compliance, when not achieved review cause factors and reschedule.
* Management and maintenance of the Lime and Caustic plants and storage facilities.

------------------------------------

Position:
Service:
Facility:
Superintendent Maintenance
Jan 2003 - Mar 2004
Murray Basin Titanium- MBFjv, Wemen, Victoria
This was a Mineral Sands operation using a 400tph floating dredge which in turn fed a wet processing plant producing 25 tons per hour of high grade mineral concentrate. (Titanium Sands). The operation employed a total of 55 individuals, 11 being direct reports.

Achievements:
* Reduced unplanned stoppages, boosting plant mechanical/electrical availability.
* Analysed re-occurring faults and implemented preventive and predictive type maintenance practices to achieve this. Using this approach sometimes led to the replacement or modification of specific pieces of plant.
* Development of a 24-month major maintenance schedule, this proved to be an excellent tool to assist with the justification of future maintenance budgets.
* Controlled the costs of all in-house and out sourced maintenance activities by implementing contract awards to various service providers.
* Implemented and trained personnel in the correct use and benefits of using JSA's and Restricted Entry Permit Systems.
* Introduced a company sponsored Fitness for Work Program.
Accountabilities: * The formation of the Safe Work options (similar to a Take5) and SWP procedures, furthermore the acceptance and compliance to these by my work crews.
* Ensure compliance of all Statutory Mining, local and State Government legislations and regulations.
* Reduction of excessive unplanned downtime.
* Source, and manage all Contractor work groups.
* Supervise Procurement and Stores personnel.

------------------------------------

Position:
Service:
Facility:
Maintenance Planner/Supervisor
Jan 2000 - Dec 2002
Site: Sons of Gwalia (SOG) Leonora
This site was SOG's longest running and most profitable Gold mining and processing operation. The operation mined ore from several open cut satellite ore bodies as well as 2 separate underground decline operations. The operation produced between 400,000 oz and 565,000 ounces of fine gold per year with a workforce of approximately 270 individuals, 17 of these being direct reports

Achievements:
* Formulated a weekly and monthly maintenance schedule that was achievable for both electrical and mechanical workgroups.
* Implemented detailed work packs, these contained specific tooling, work procedures, a first pass JHA, permits required and a list of required parts and their locations.
* Managed my duties and responsibilities in a duel role as the Planner/Scheduler and Supervisor.
* Achieved sustainable improvements over time of both plant availability and reliability.
* Implemented plant criticality assessment and identified critical spares using a Top Down Bottom Up type survey.
* Reviewed and optimization of all plant PM tasks.
* Developed Life plans for all critical plant equipment.
* Formulated and prioritized a Hit List of work that was planned and ready to go with all parts available (this was implemented when the plant was available for unplanned events).

Accountabilities:
* Management and supervision of reagent area maintenance activities, also including site the Lime silo and associated automated dosing system.
* Maintenance and overhaul of various types of slurry pumping systems
* Managed Work-pack preparation and parts identification for planned work.
* Review all non compliances to plan and initiated contingencies to achieve desired results and availabilities.
* Managed maintenance activities for all underground fixed plant equipment including site dewatering operations.
* Relief Maintenance Superintendent as required to cover leave and other absences.
------------------------------------

Position:
Service:
Facility:
Contract specialist Welder/Fitter
Jan 1999 - Dec 1999
Site: Macrae's Gold mine, South Island, New Zealand
This site is New Zealand's largest and most successful gold operation. The operation produces approximately 170,000 oz of gold annually from low grade ore reserves using autoclave and floatation technology. The site workforce was approximately 85 persons plus a contract crew of 55 to install and commission the autoclave and associated equipment.

Achievements: * Qualified in A.M.S.E 9 titanium welding for all positions using both automated and manual Tig welding processes.
* Achieved a pass rate of 98% for tested welds both stainless steel and titanium.
* Assisted with the brick lining of the lining of the autoclave and achieved 100% success regards brick retention on inspection after trials.
* The successful installation of valves, flanges, check valves and bypass pipe work without compromising critical flange and gasket surfaces.
* Successful hydrostatic testing of all pipe work associated with the autoclave.
* Assisted in the development of welding repair procedures and preventative maintenance tasks.
* Involved in the safe initial run up and commissioning of the AutoClave and associated oxygen plant, this was completed within budget and on time.

Accountabilities:
* Responsible for the safe execution of fitting and welding duties, including validation of permits, task preparation and JHA formulation
* Responsible for quality documents and control of titanium welding processes.
* Responsible for all risk control procedures related to fabrication and installation of titanium and stainless steel pipe work.
------------------------------------

Position:
Service:
Facility:
Fitting and Welding Forman
Mar 1997 – Dec 1998
Gidgee Gold Mine, West Australia
This site although old and run down was surprisingly reliable. The site operated a contracted mobile crushing facility and a gyratory crusher. The process plant was C.I.L and made use of electro winning cells and a gravity recovery circuit.
The site workforce was approximately 90 persons with a maintenance crew of 8, 4 of these were direct reports.

Achievements: * The successful fabrication, installation and commissioning of a gravity gold circuit to capture free gold using a keilson bowl arrangement.
* The successful rebuild of the Rule Tower and conversion to a uniform wear plate system.
* The successful reline of 3 C.I.L tanks.
* Initiated bore case cut downs for pit dewatering operations without damaging pumps of flexible hoses

Accountabilities:
* Manage all new fabrications and repair work, both on the plant and at satellite open pit operations.
* Organise work packs and scopes of work for team members.
* Management of contractor work crews.
* Manage pit dewatering activities including pump and engine maintenance, poly and steel pipe repairs and pump relocations.

------------------------------------

Position:
Service:
Facility:
Fitting and Welding Leading hand, relief Supervisor
Jan1993 - Feb 1997
Cockatoo Island, West Australia, working for West-Arc Engineering.
West arc was contracted to maintain the crushing circuit, beneficiation plant, stacking and ship loading activities for Eltin's Mining.
The site employed approximately 45 individuals, of these 10 were electrical and mechanical maintainers and 9 of these were direct reports

Achievements: * Successful installation and commissioning of a Transimin CVR impact crusher, conveyor systems, hydraulics and associated walkways.
* Successful refurbishment and commissioning of a rotating apron feeder.
* The installation of a Nordberg mobile apron feeder and Jaw crusher assembly.
* The overhaul of a magnetic separation machine including oil tank reservoir rebuilds.
* Developed safe work procedures for repetitive tasks such as screen mat, jaw liner and impact bar change outs.
* Embedded a safety culture in the workforce that seen the benefits in using safety systems such as J.H.A use.
* Participated in the planning, overhaul and commissioning of the ship loading facility and ore stacking conveyor systems.

Accountabilities:
* Achieve and maintain high plant availabilities.
* Set relevant KPI standards for team, communicate these and assist in their achievement.
* Manage any incident investigation for the team.
* Plan weekly forward workload.

------------------------------------
Courses, qualifications and experience in…
* Managing and diffusing conflict in the workplace, introduction to advanced.
* Workplace harassment & discrimination awareness introduction to advanced.
* Negotiation to get a result, Introduction to advanced.
* Indigenous employee cultural awareness and understanding.
* Five "S" and Lean Maintenance best practice and implementation using the "Six Sigma" process.
* Technical writing introduction to advanced.
* Current MSIC and Port Hedland Port Authority induction cards (valid to 2013 and Oct 2009 respectively).
* St John's Workplace First Aid Course to level 3 (Senior) & Oxy-viva Certified. (Just out of date).
* Job Safety Analysis, Risk and Hazard Management techniques and document formulation.
* Kepner Tregore Problem solving and Project planning and implementation workshops.
* ICAM, TapRoot and Dimmia Basic to advanced root cause analysis and incident investigation tools.
* Radiation safety officer certified.
* Microsoft Project basic, Word Processing intermediate, Excel spreadsheets to advanced, Power Point Introduction to advanced.
* Attended training, highlighting best practice Maintenance planning techniques,
* SAP, Tips and tricks, and Maintenance planning modules, MainPac, Impact XP & Smart-Stream CMMS.
* Forklift, 20 ton mobile Slewing Crane, Dogman certified and "IT" 28 Tool Carrier Certification (Worksafe).
* Current HR and R Class Australian driver's license.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 201 to 250 of 944)

Go to Search Parameters...

Brief Description

Australian Mining Engineer

Experience welder and heavy equipment mechanic

I have many years in mechanical electrical troubleshooting and Repairs also very skilled in fabrication and welding repairs.

To utilize extensively my Technical and Business skills in an Engineers role, particularly bring about change in an Organization to improve system and procedure, Cost Control, Management reporting and strategic Planning in order to maximize profit and minimize risks

To do maintenance tasks and overhaul all types of mechanical equipment. This includes, but is not limited to, dismantling and stripping equipment, assembling and reconditioning equipment, faultfinding on mechanical equipment and the lubrication of bearings and all moving parts on overhauled equipmen

I am looking to gain experience at a mine site and go on to develop a career as a mine geologist.

I am a Heavy equipment operator /crusher mechanic/welder, I am looking for a better employment.

Free! I am a production geologist with over 15 years experience across a wide range of commodities including base metals, copper and gold in both open cut and underground environments.

Drilling engineer - diamond core drilling

roofbolter 3rd shift single boom or double scoopman-ram car can tram miner -section utility- belt crew belt-power moves

Time served apprentice trained mechanical fitter, with experience of large fixed plant in quarries, factories, foundries and cement plants

15 Years experience in Construction and Mining. Qualified Diesel Mechanic with Supervisor and Foreman skills.

I am a Metallurgical Engineer with over nine years in-depth working experience in the mining / metals extraction industry. Has been exposed to metallurgical research, process control, process modelling, mineral processing plants, smelting environment and production planning. Currently I am a Process

HSE - Working safely, cost effectively and abiding to my employer's Safety, Health, Environmental and Quality policy.

Mechanic with 14 years experience ranging from draglines loaders and shovels to haul trucks and over the road trucks. Also including welding skills, as well as proficient with hydraulic and electrical schematics.

Equipment operation and management

Industrial Electrician/Instrumentation Technician with Linesman training

Mechanic & Welder on construction equipment, to include repair and rebuild all parts.

Extensive work in coal field

Millwright traveler, precsion, turbine, str.welder, mech, steel/iron work, machinist

Warehouse laborers

Seeking an international position on an oil platform, drilling company, shipping industry, mining industry or any similar heavy duty industry as Mechanical Fitter and Turner where my experience, training and good working habits will be an asset to your company.

To obtain employment in the mining industry. Thank you for your time and consideration.

A detailed summary of my skills and experiences within all the aspects of production drilling and blasting, both in open cut and underground mining. I have specialized in this field for the last fourteen years and my resume details my competence and confidence within the mining industry.

Operating zoomboom,over head cranes 20,40,80ton,loaders 644,624,544,l90,l120,packer 2,000hrs have my loader tickets and crane tickets. first aid level a cpr .

B Level welder with CWB flux core ticket, bondable, dual citizen (Canada/USA),

I am currently working as an Operations Research Officer in De Beers. I am based in its headquarters, in Johannesburg. My key responsibility is to compose optimal plans for management for mining our resources subjected to various constraints and objective functions.

Inexperienced Surface Miner, Class A CDL Truck Driver, Army Veteran, Paralegal

Maintenance Superintendent with over 20 years experience in Mining and heavy industrial workgroups, I am a compedent and efficient manager of resources and always meet my target goals. My goal is to work for a respected organisation in the mining industry which will provide both challenge and reward

Twenty year mill experience leading crew independently in full mill operations

13yrs diamond drilling,7yrs international,3yrs supervisor, fluent in Spanish, worked in North, Central, South America, Mexico, and Europe. Deep holes to 2000 meters High altitude up to 5000 meters surface and underground.

Moving to Georgia Thomaston Area 4/01/04

Qualified Mechanical Fitter with experience in the following industries: Paper, Sugar, Aluminum, Sawmilling & Mining. I have alot of experience in the paer, mining and also textile industry.

Field Machinist/Millwright

I'm young, smart, skilled, ambitious and my motto is: if you work hard, do your very best and go after your goals, the world will open up to you!

Cat mechanic

Continuous Coal Miner, 4 years experience, Fireboss, Mine Rescue Team Co-captain

Underground operator

Electrician - Construction

I am likely to be something of a perfectionist and will sacrifice pleasure ells where in order to accomplice my work to a set standard, I am determined and have high standards set my work. Combined with my positive no-nonsense style of work I always get positive results from my work. I can work unsu

Trade Qualified Boilermaker with over 15 years experience

Skilled in trouble shooting and maintenance of various types of equipment Cleaned, lubricated and performed routine maintenance work on machinery Performed safety checks on various types of equipment Repaired stationary industrial machinery and mechanical equipment

I have 30+years in the heavy equipment field service. I work on all parts of any machine diesel or gas that is construction or mining related. Don't let the years fool you. I can work circles around the younger guys and teach them more than they have ever learned.

Qualified diesel mechanic with 12 years experience in a commercial and mining environment and 3 years Maintenance supervisor experience.

Industrial Electrical, Instrumentation, Power Generation Systems, PLC and Scada design and programming, Construction and Maint.

back hoe ,skiddre, harvester, porter, off road trucks cat 769,773,777

Am a male compentant Auto-LHD Electrician with 5years working exposure in different machine and vehicle

Managing Mine Resources, Maintenance Planning, Mine Start-Up,

Electrical Project/Construction Management

Superintentant sand and gravel mining, from start to reclamation./ Clean construction debris and recyling site experiience.

1 2 3 4 [ 5 ] 6 7 8 9 10 11 12 13 14 15 16 17 18 19

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out