Misco Jobs
|
Go to Job Seeker's Center »»
|
«« previous resume
Resume #83560
next resume »»
CONTACT INFORMATION:
Summary Twenty two years of mining and construction experience in both surface and underground. Partner in Drilling & Blasting company that services the Mining, Construction and Rail Industries. I have served as Chief Inspector for Construction Management on The Heartland Corridor Project in West Virginia. Four as Chief Inspector for the city of Atlanta on the West Area CSO. Eighteen years in supervisory positions. Fifteen years drilling, blasting and training. Bituminous Coal Operators of America (BCOA) Supervisory Training Certified. Surface and Underground MSHA and OSHA Trainer. International Society of Explosive Engineers (ISEE) Member and level 2 Blaster.
Areas of Expertise Drill & Blast Quarry and Construction
Drill & Blast Shaft, Slope and Tunnel Development
Gassy Mine Foreman, Examiner and Blaster
Shaft, Slope and Tunnel Initial support and permanent lining.
Shaft and Tunnel Grout for water control and structural integrity
High and Low pressure Chemical and Cementatious grout
Smooth wall Blasting Techniques
Shotcrete.
Experience 2008-Present MANA Drill & Blast, LLC Atlanta, GA
President of Special Projects Mullan Tunnel Blossburg MT
Develop and Implement means and methods for efficient drilling in active railroad tunnels with minimal disruption. Estimate, Schedule and Drill core holes for tunnel lining modification exploration. For Montana Rail Link.
2008-2008 Jacobs Associates San Francisco, CA
Chief Inspector Heartland Corridor Roderfield WV
Construction management inspection to insure quality control and contract specification requirements on a major Railway Tunnel retro-fit project in a Union Environment for Norfolk Southern. Duties include, but not limited to Consulting with design and CM team issues with possible methane gas in tunnel areas due to coal seams in overburden. Collecting progress statistics, updating and monitoring daily reports and logs on progress. Monitoring ongoing contract progress.
2004–2007 Delon Hampton & Associates Atlanta, GA
Chief Tunneling Inspector West Area CSO Atlanta Ga
Construction Management Chief Inspector for Drill and Blast Shafts and tunnels on a $250 million CSO project in Atlanta., Oversee and Direct 10 inspectors on 7 sites, 4 Construction Shafts 40' diameter 100' to 175' deep, 1 intake shaft 20' diameter 100' deep, 1 overflow shaft 20' diameter 100' deep and 1 Pump station shaft 75' diameter 125' deep including initial support, permanent lining and contact grouting. Several thousand feet of Drill and Blast Starter and tail tunnels, Overflow and connector tunnels Excavation, Lining and Grouting were monitored also to insure contract compliance through monitoring daily shift reports Compile records for weekly progress reports. Assure compliance of blasting requirements for city, state and federal regulations. Serve in unofficial Public Relations Liaison position for city of Atlanta to communities during blasting operations. Compile and maintain blast data. Assist resident engineer with daily and weekly progress reports.
1996–2004 Dynatec Mining Contractors Various Loc.
Mine Foreman / Blaster, Barrick Goldstrike Meikle Mine Elko NV
Drill, Blast, Excavate and Line a 1400' x 21' diameter shaft for gold mine production. Including permanent lining and steel installation for 4 compartments. Deepen the same shaft to 1750' while in production 2 years later. Line Install steel and commission shaft. Drive 3600' of Decline 30'x36' for haulage, develop an underground shop and office area 60'x1200'x40' including bridge crane and fire door installation and commissioning, excavate and line ore passes and storage bins across several mine levels, Excavate and develop Crusher station 80'x200'x80' including setup and commissioning of 200 TPH crusher. Shotcrete line all these areas 8000+ yards. Process time and material estimates for construction bids. Directed daily safety meetings.
Mine Foreman / Blaster, Barrick Goldstrike Rodeo Mine Elko NV
Drill, Blast, Excavate and Line a 1300' x 12' diameter shaft for aggregate storage. Included hoist and headframe setup.
Mine Foreman/Blaster Gassy Mine, FMC Corp Little America WY
Drill, Blast, Excavate and Line an 800' deep 20' diameter ventilation shaft for a Trona mine.
Leadman/Driller CargillSalt Cleveland OH
Control water inflow in Production and service shafts of a Salt mine by drilling and injecting High pressure Chemical grout. Changed out hoist ropes on both production skips. Inspected and replaced guides and steel in both shafts.
1995–1996 Anglo Gold Elko, NV
Drill and Blast Specialist Foreman Murray Mine Elko NV
Train and Supervise drill and blast crews in an underground gold mine. Drill and blast bench and face rounds. Operate Atlas Copco and Tamrock jumbos, Tamrock Solo and Ingersoll Rand air track drills. Wagner 3.5 and 6 yard Muckers. Wagner and Dux Haul trucks.Power trucks and Scissor Lifts, Motor Graders, Boom truckand Backhoes.
1991–1995 Tower Rock Stone Ste. Gen MO MO
Surface Driller Ste Genevieve and Scott City Mo
Drill and blast rock in both production and stripping areas in a surface rock quarry. Operated Drilltech, Gardner Denver, Tamrock and Ingersoll Rand Air/Hydraulic and ITH Drills up to 6 ¾". Cat and Dresser Loaders up to 993c. Cat and Terex haul trucks up to 777. Skidsteer Loaders.
1989–1991 Cominco American Bixby, MO
Underground Equipment Operator
Build and maintain roadways in an underground Lead mine. Operated Cat and Komatsu Loaders up to 980. Cat and Galion Road Graders. Cat Articulating Haul Trucks. Various Drills and High explosives.
1987-1989 Mid-Continent Resources Carbondale, CO
Underground Lead Miner
Started out as the Safety/First Responder. Moved into coal mining and Lead Man position quickly. Mine caught fire and closed down.
Education/Certifications
MSHA Surface and Underground Trainer
OSHA Construction and General Industry Trainer
ISEE Level I & II Blaster
Shot Firer Certification Colorado, Wyoming & Illinois
Mine Foreman Certification Wyoming & Illinois
Mine Examiner Wyoming & Illinois
BCOA Supervisor Trained
FRA Inspector Qualified
Seminar Boot Camp: Public Speaking Course
Affiliations Member ISEE, Cobb County Chamber of Commerce, St.Louis Chamber of Commerce
Veteran of the United States Air Force.
Assistant Blaster for pyrotechnics show: Cape Girardeau, MO. Air Show
Additions
References: I have begun to consult companies on Drilling, Blasting and Safety training and techniques for both surface and underground mining in all rock types, as well as our Drill & Blasting Business. I bring over twenty years of mining and knowledge to the table that will be effective in any position.
next resume »»
Search Results (Resumes 1 to 50 of 941)
Go to Search Parameters...
Brief Description
Free!
Twenty two years of mining and construction experience in both surface and underground. Partner in Drilling & Blasting company that services the Mining, Construction and Rail Industries.
Free!
Electrical Supervisor/Technician. Construction and Commissioning, Explosion Protection Certification
Chemist / Metallurgist - Forte is gold analysis and extraction
Work effectively as a leader/supervisor with peers and Teams
20 Years electrical experiance
Overseas experience in Mineing and Oiland Gas in Maintenance Management
- Head of laboratory for electron microscopy (mineralogy, X-ray-analysis) - Research staff member (Material science, analytical electron microscopy) - Lecturer in mineralogy, microscopy, petrology, field geology, geological mapping - Exploration geologist
Maintenance Electrician
Skilled technician with 30 years experience.
experienced drilling blasting supervisor competent in all aspects of blasting tecniques
Free!
25 years miner operator, 2 years supervisor
Welder-fitter with over 20 years experience, supervisor, quality control experience, CWB certified. Dependable, hard worker, will travel.
Planner Electrical Jobs
Fitter and a Maintenance Supervisor.
I am a Kentucky certified miner, mine foreman, electrician and electrical instructor.
I am an experienced and qualified supervisor/manager with long term knowledge of the Manufacturing of construction Materials.
26 years of mechanic/welding background, Certified welder, 21 years Army SFC/E-7 retired
Experienced multi-skilled engineer with proven sales track record
Journeyman/Red Seal B Pressure Welder
MC Driver and Chef
Millwright welding tickets
Excavator-grapple, mobile shear, excavation, demolition, scrap handling, stripping, quarry work
10 years as maintenance manager, 10 years in africa. congo, mali. and guinea.
I have a comprehensive understanding of a wide and varied range of vehicles, including HGV, PSV, Heavy Plant and Drilling Machinery. I am keen to use these multiple skills in a post which will prove challenging. In addition to my mechanical capabilities, I also have a good working knowledge of hydra
28 years experience in ug/ hard rock and coal. Hard Rock: Alimak, Drift (rubber and rail), all types of stoping methods, and equipment operator of 1,1/4yd to 9yd loaders all brands, over shot rail muckers from 12b to 25 , jumbo drills single and double boom. Coal: Fletcher bolter and long wall
i am the man for your work ,i have run all different kinds of boring mills
Commissioning/SCADA systems/Electronics/mining industry
Maintenance oriented. Highly skilled and experienced.
Im a fitter with alot of skills, like winder fitter, hydraulic fitter, maintenance, heavy duty fitter. Hydraulic and pneumatic experience, reading off hydraulic drawing. do designing, planning and building of new power packs for raise bores aswell.
27 years underground -production&movecrew&dead work,good worker&very dependable.
32 years experiance in the mining industry. I worked as a Shaft Timberman(17years),Shift Boss on Developing, Tramming& Construction (9years), Diamond Drill Supervisor/Foreman/Site Manager(4years)
Automotive electrician.
Qualifications: NTS 3 and 4 courses: Ind. Electronics, Eng. Science, Mechanotechnics, Eng. Drawings and Applied Mathematics. I worked as an electrician and later as a Hoist Technician. I have experiance in Primary Crushers, Double drum and Koepie Winders (Hoists). Compressors, Ventilation Fans.
Certified Master Electrician with 18 years mining and smelting experience
Free!
Operational knowledge of mining mchinery,health & safety awareness in the mining enviroment, quickly able to learn new machinery and techniques, diverse knowledge of trades and the industry sector, excellent knowledge of mining and the machinery involved,having come from an engineering background.
Started mining at the age of 21,Have worked Successfully in 11 differant mines in Texas
Drilling supervisor with 30 years experience on a variety of drills in remote locations throughout Africa, Central & South America, and Canada. Use a collaborative approach in training and working with local employees on the safe and effective operation of drills.
Electrical / Instrumentation Technician, Heavy equipment Mechanic
Operating Cranes for over 32 Years
Qualified diesel fitter, qualified at transet as fitter for 27 years. heavy duty mining as follows: catepillar dosers , d9 and d10r, graders, 16h. earth moving equipmnet as 785 catepillars, trip 7f's, 7d's. loader 992 catepillar and 983 loaders. experience on generator water pumps service and rep.
Trade quallified boilermaker with 26 years experience
HEAVY EQUIPMENT OPERATOR with over 24 years experience in handling and operating different types of Heavy Equipment such as CAT Excavator 330, Crawler Crane 65 Toner, Mobile Crane, Tower Crane, Bulldozer at any type, Front Loader, Dump Truck and Light Vehicles
Trouble shooting, repair and maintenance of moblie mining equipment
30+ years in the mining field worked on a vast and varied range of machinery
Underground miner and supervisor
Have worked in the field for over 25 years.
I was a Contracts Manager with extensive experience in road construction in Africa for Grinaker/LTA. I have 15 years of experience in drilling, blasting and crushing. In this role, I was also in charge of the loading and hauling of aggregate materials used for road construction.
Underground fitter/machinist, with hydraulic experience, and am proficient in all types of welding. Reliable, motivated, self-starter, that is safety oriented. I have great interpersonal skills and work well with others. I go that extra mile to get the job done efficiently.
I would like to continue my career in mining as an equipment operator or a supervisor/foreman. I have worked in or around mines for the last 25 years, the last 5 as a supervisor.
Senior Maintenance Planner experienced with Ellipse, Mobile & Fixed Plant
[ 1 ]
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Seach Parameters
Change search parameters...
CATEGORIES:
Trades/Skilled;
INDUSTRIES:
Mining;
Change search parameters...
Keywords:
(e.g. mining engineer)
Find results with:
ANY of the words
ALL of the words
WITHOUT the words
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to
Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.
How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".
More Frequenly Asked Questions...
Employer's Center
»
Employers Home
»
Feedback
»
Help
»
Post Jobs
»
Edit/Delete Jobs
»
Search Resumes
»
Resumes By Email
»
My Account
»
Log In
»
Log Out
©1999-2009 Misco Jobs. All rights reserved. Contact:
support@miscojobs.com