Resume - Welder Fitter, with pressure certification (F3/F4 on 5G uphill progression -mild...

Misco Jobs

Resume #84515

CONTACT INFORMATION:
View contact information...

Abstract: I am a self motivated, precision oriented and productive while maintaining safety standards and high efficiency. I work well under any condition. I know how to meet deadlines and make critical decision under pressure.

Professional Qualifications

ABSA Welding Performance Qualification
Calgary, Ab, 2009 (Expiry 06/2011)
Grade B-Pressure Welder

Olds College Vocational Welding
Olds, Ab, 2006 / 2008
Apprentice 1st, 2nd, 3rd period
Journeyman Welder with Red Seal.

Work Experience

* Braymo Energy Corporation, Ab 2008 / 2009
Journeyman Welder
Applied expertise with Mig / Tig / Stick welding to assemble custom industrial/commercial heating units from 1 to 100 million BTU. Fabricated components from blueprints, using alloy steel (HARDOX) and mild steel. Operated shear, brake, plasma cutter and oxy-fuel cutting equipment. Performed leak test on tube bundles and boilers. Worked in heights and confined area inside boiler chambers. Used fork lift and rigging equipment every day. Helped millwright setting up motors, fans and drive systems on heating units.

* Courtney Berg Industries Ltd., Ab 2006 / 2008
Welder apprentice

Supervised Gravel box and End Dump production, and assisted engineers and draftspersons making revision on blueprints for prototypes. Applied expertise with Mig / Flux core welding to build truck boxes including grain box, end dump, gravel box, landscape deck and flat deck. Installed and tested hydraulic tailgate and all-swing tail gate. Made visual inspection of all welds. Used forklift and overhead crane for moving components and finish products; including 35 feet long End Dumps. Maintained welding stations, including changing wire spools, liners, tips and troubleshooting minor. Worked as a welder and pipe fitter helper on mud tanks and operated welding robot. Used iron worker, brake, shear, OAC, plasma and oxy-fuel cutting equipment.

* Various Reforestation Contractors, Canada, 2003 / 2005
Tree planter

Work in remote area, in camp setting. Was paid per piece and managed to plant 2000+ tree per day average. Very physical and demanding job in every climate and environment (rain, sleet, mud, hills and from sub-zero to +40C temperature). Extensive use of spatial layering in order to replant land as efficiently as possible. Had to conform to strict quality control while maintaining a breakneck pace.

Skills

Welder Fitter Fabricator

Process: SMAW (stick), GTAW (tig), FCAW, GMAW (mig), OAC, OAW, PAC, CAC-A

Manufacturing equipment: Drill Press, Shear, Brake, Robot Welder and other.

Forklift up to 10 ton, Overhead crane 10 tons and Rigging experience.

Interpret Blue prints

Other experience: Millwright and sheet fabricator helper.

Other Certifications
WHMIS
2007

Lifeguard certification (pool/lake)
1997

First Aid
1997

Awards/Achievements

Apprenticeship and Industry Training Board Scholarship 2008
Recognize apprentices and trainees who have demonstrated excellence in their trade http://www.tradesecrets.gov.ab.ca/index.html?page=scholarships_awards/scholarships_awards.html
(See 2008 award recipients)

Safety Award - 2008
2 years without any lost time for injuries.

Safety award - 2007
Voted safest person in the manufacturing department.

References Available Upon Request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 401 to 450 of 922)

Go to Search Parameters...

Brief Description

Underground Miner : position in a Company where training abilities, work experience and advancement capabilities can be demonstrated.

I am seeking Medical Advisor/Occupational Health position to continue my occupational physician’s career with a multinational company.

Welder Fitter, with pressure certification (F3/F4 on 5G uphill progression -mild steel). Worked in fabricating shop on commercial and industrial products. Very proficient with GMAW and SMAW. Little experience with GTAW. Worked mostly mild still and some alloy. Little aluminum experience.

Journeyman Industrial Electrician , Apprentice Instrumentation Mechanic / PLC , DCS, HMI, SCADA . Underground / Surface, Oil and Gas, Mining

I am an electrician and electrical contractor. I have been involved in a variety of different projects including a Power Station, Coal Mine, Prision and an Airport.

Rotating & reciprocating equipment technician

I am looking for permanent employment at a company where I can use my training and experience to perform my job function. I would like to work for a company where advancement in to management or some other professional aspect of the company is a possibility

25 years Industrial Construction experience as a Construction Manager, Superintendent, Project Coordinator, Estimator and Maintenance Planner.

Structural Steel Detailer, Tekla v15, Pro Steel v17 Auctocad 2008

I have 7 years experience of electrical installation onshore and offshore Oil / Gas Industry complemented with a 4-year recognized apprenticeship.

Fitter / Rig Mechanic. Overseas experience FIFO, All standard and preventative mechanical maintenance on all oil & gas rig systems, Please view attach resume. Thank you Regards Neil Hopper

Professional Land Surveyor

International Operations- Foreman, Diamond Driller, RC Driller, Long Hole Driller, Blaster etc.

Young haul truck driver eager to get back to work, trained on both articulated & rigied frame haul trucks.

Sales, Engineering Project Manager

Free! Varied and broad experience in construction, on/offshore projects, mechanical & piping, shipping, logistics, materials and QA-QC all mainly in the oil & gas industry for over 35 years. Countries worked: Eq/Guinea-Nigeria-Egypt-Ivory Coast-India-China-Canada-Spain-Holland-UAE-Oman-Qatar-Malaysia-Indo

Qualified, results-producing Emergency Management Professional with experience steering and directing all aspects of operations, administration, budgeting, and equipment maintenance. Successful in managing multiple projects with compelling priorities involving program development.

I have worked as a chef in extreme conditions in the past. nothing i can't handle big or small jobs.

Load overburden, split coal, push in a shop

A grade electrical licence. Underground communications. Tamrock drill equipment service and fault finding, Flygt pump repairs and maintenance. Ability to read and draw schematics/wiring diagrams. HV switching. Primary/secondary ventilation. Commercial electrical installations. Duty desination.

Hard worker pursuing a career in the mining industry. Experienced in heavy equipment repair. Mechanical aptitude and willing to learn.

Mining Engineer with 20+ years experience, Supervisor of Drilling Crews, great work ethic, will meet deadlines and bottom line, effective team builder

I have 13 years of experience in,mining and oceanography,i have worked in an institition where i held leading posts and have been able to achieve all the set cooperative startegies in the shortest time as possible

I have over 20 years in the underground profession and I am looking for some company that can utilize my experience.

Proficiency with problem analysis and resolution Specializes in light / heavy wheeled vehicles and construction equipment

I am a qualifies Inter provincial (red Seal) Industrial Mechanic (millwright), as well as a Interprovincial (red seal) welder certificate, with a all psition SMAW CWB and a 2 position GMAW CWB ticket.

-1 yr: Business Consult. in Comm. Futures Trading for analysis commodity markets -1 yr & 2 mths: implement, maintain database & filing system -2 yrs: Expl. Geologist working in the field at remote locations, produce maps,maintain database; Sound knowledge of safety policies

Managing, organising and participating in geological field studies, drilling and geological testing programAnalysing geological, geochemical and geophysical survey data, well logs and other test results, maps, notes and cross sections, core samples, drill cuttings and rock samples

I am a safe and productive Miner with ten years of increasing experience

Quailty Coordinator, Welding Specialist, Safety Training Coordinator, Operations Coordinator Prefer Former CIS Russia, Kazakhstan

Professional Qualifications: BE Sales & Marketing Open, City & Guilds Mechanical Technician,ONC Pipe Maintenance & Instillation,NVQ Level I, II, III Quality Auditing,Diploma supervisory management Team Leadership I & II,

Troublshooter, computer and networking, electronics, technicial

Seasoned Professional with 14 Plus years varied experience in the Geology Field. Relocation possible.

My two and a half years experience working in the mining atmosphere in the Morenci Mine repairing and maintaining CAT equipment and haul trucks coupled with my interest and passion for heavy duty mechanics will hopefully align well with what you are looking for.

I am Professional Logistician (CITT), Certified Purchaser, Journeyman H/D-Parts Technician and Warehouseman. I live and work in Fort McMurray (Warehouse Supervisor for Nexen Canada at Long Lake Project ($21 million inventory) -20 years of combined material distr.experience

Have exstensive experience, training, and knowledge as an underground coal mine Maintenance Foreman/Electrician in longwall and continuous miner sections. Have excellent electrical, mechanical and hydraulic skills along with welding,cutting, and fabrication skills.

Diamond driller / Truck driver

Experienced offshore Client Representative and qualified Hydrographic surveyor; with Master's ticket, NEBOSH, MCSE .

Project Management / Inspection / Procurement / Quality Assurance

Diesel mechanic/ Fitter 20 years mining experience

To abtain a position as a technition, or maintenance employee. Skills are mostly Mechanical and Recovery for wheeled vehicle, Heavy and light. Also over 6 years in the US Military

Find a job in the mining industry to continue using the broad knowledge of mining techniques that I have; and learn new ones.

Concrete plant operator, concrete mixer driver, semi-dump truck and some flatbed experience. Also site supervisor with end loader and skid steer experience. Many years of welding, machining, and maintenance duties.

I am a Red Seal certified Heavy Duty Mechanic. For the past ten years I have been employed with Douglas Lake Equipment first as Field Service Technician then moving up to Parts and Service manager.

Heavy Equipment / Crane Mechanic / Welder

Mechanic; Hydraulic Tech; Crane Operator - Mechanic; Detroit & Allisson Transmission Mechanic

I've been around heavy equipment since I was young, working on cash crop farms and then construction equipment like lift trucks, dozers and pay loaders , and now want to re-enter the work field in what I know best and enjoy the most.

Looking to start my career in the mining industry as a 2nd year heavy duty mechanic in the summer of 2004. I will be graduating from Assinibione Community College with my level 2 certificate in heavy duty, farm, and transport.

I have 18 years experience in the oil field on drill rigs also have 10 years experience as caterpillar mechanic I have computer, construction,electrical,plumbing skills and I am very safety minded

Electrician - Certified

1 2 3 4 5 6 7 8 [ 9 ] 10 11 12 13 14 15 16 17 18 19

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out