Resume - I am looking for a position which carries high impact as well as new challenges.

Misco Jobs

Resume #84848

CONTACT INFORMATION:
View contact information...

PROFESSIONAL EXPERIENCE
Present
Construction Labor Contractors
Knoxville, TN. (Supervisor) Tom Tilley 865-293-8037
JOURNEYMEN SHEET METAL MECHANIC:

NASA Jet Propulsion Laboratory
Pasadena CA.
2008
ENGINEERING TECHNICIAN II:
Duties included supporting the Mars Science Laboratory (MSL). Assignments included assembly and disassembly of mock-ups, prototype and flight spacecraft. I conducted tests on electromechanical and prototype electromechanical devices and assemblies. Performed and installed assemblies in clean room environments. Qualified flight technician specialist working in high bays and 10,000 class clean rooms and in this capacity supported most of the laboratories at JPL.

JBM Incorporated
Knoxville, TN. (Supervisor) Steve Stiles 865-573-9800
2006 - 2008
SHEET METAL MECHANIC:
I designed, lay out and fabricate equipment and machinery for power plants, paper mills, cement plants and aluminum foundries across the United States. Coordinated teams in the field for installation of equipment that I fabricated in Knoxville, Tennessee.

Bennett Construction
Home Remodeling (owner) 423-257-2057
Santa Ynez, CA.
2003-2006
ARCHITECTURAL DESIGNER AND BUILDER:
Construction and budget input early into the process allowing the design to develop in alignment with the client's goals. Worked in areas from new construction to remodeling kitchens, bathrooms, removing walls, reworking electrical wiring, adding and changing the existing lights, new stucco, new texturing walls, painting, stone work, manufacturing granite counter tops, tile, domes and barreled ceilings and architectural columns.

Space Systems Loral
Palo Alto, CA. (Supervisor) Randy Simons 650-852-4000
2000 - 2003
SENIOR LEAD, LAB TECHNICIAN:
My duties surrounded the Assembly, Integration and Test on communication satellites. I installed flight hardware per payload requirements to the complete spacecraft for final flight. Integration of the communication panels onto the Bus Module, integration of tower assemblies, antennas and reflectors delivering a final assembled spacecraft to the launch base. Programs supported to the following spacecraft: Optus C1, DirecTV-5, DirecTV flights 5/7, Echo Star flights 8/9, Sirius CDRadio flights 2/3/4, Wild Blue, IPStar, MBsat, MTSat-1R, Satmex and Intelsat 9 flights 5/6/7.
Other assigned tasks included the training of technicians, coordinating teams at performing and completing the assigned tasks that had priority. NASA certified in flight harness, flight bonding of structure, thermal compound adhesives, the mate/demate of harness connecters and torque certifications. I assigned a stamp for witnessing as a quality delegate which is equal to QC quality control.

JBM Incorporated
Knoxville, TN. (Supervisor) Steve Stiles 865-573-9800
1997-2000
SHEET METAL MECHANIC:
I designed, lay out and fabricate equipment and machinery for power plants, paper mills, cement plants and aluminum foundries across the country. Coordinated teams in the field for installing the equipment fabricated in Knoxville, Tennessee

United Technologies Chemical Systems
San Jose, CA. (Supervisor) Cliff Williams 408-776-5315
1987-1994
MISSAL SHEET METAL MECHANIC:
Lay out and fabricated all flight hardware working with a team of engineers for the new upgrades to increase payloads on the Titan IV Launch Vehicle. Assembly and hydrostatic testing of flight hardware for the following programs: Space Shuttle 'Booster Separator Motors', Tomahawk Cruise Missile 'MK 111 and MK 106 Motors', and Trident-D5 ICBM. Assembly and helium leak testing for the Tomahawk Cruise Missile 'Titanium Warhead'. Heat-treated flight components for Titan IV and Tomahawk programs.
Worked with design, manufacturing and quality engineering teams to implement new programs. Fabricated all the flight hardware totaling forty flights and eighty boosters of the Titan IV Launch Vehicles.

Lockheed Missile and Space Company
Sunnyvale, CA.
1984 - 1985
VEHICLE TECHNICIAN AND SHEET METAL MECHANIC:
Developed shop aids and tooling for a wide variety of spacecraft projects.
Fabricated and installed components on spacecraft systems.
Planned necessary operations and their sequences.
Layout and selection of materials and parts per drawings.
Recommended solutions for engineers from both verbal and written instructions.

Lockheed Missile and Space Company
Austin, TX.
1981-1984
SHEET METAL MECHANIC:
Worked within several test teams to prove launch capability of unmanned remote vehicles.
Assisted R&D teams with UAV's onsite, at launch, retrieval and at wind tunnel facilities.
Evaluated data and provided design recommendations to systems engineering.
Fabricated ground support and flight hardware for special programs.
Worked with engineers to modify designs for more efficient shop fabrication.

1977-1980
Worked right out of welding school starting1977. I worked at four different companies, mainly with defense sub-contractors. Duties included completed layout, welding and custom fabrication with metals up to ten inches thick, rolling or forming with 800 ton press breaks on items like: nose cones, rounds, wing struts for F-16's, storage silos for MX missiles and forming mandrels for nose cones that went on the boosters for the Space Shuttle.

EQUIPMENT USED 28 YEARS:
Bench type and stand-alone type drill presses capable of drilling with bits up to three inches in diameter. Bridge Port mills, lathes of 24" diameter. Press brakes, from hand operated to those with the capability of bending up to sixteen foot long flanges. All types of measuring devices such as calipers from 6" to 48", dial and veneer, and most all electric and pneumatic hand tools.

EDUCATION
Welding School certified structural steel and pipe 1978.
Attending online courses of the University of Phoenix 2001.
Attended ETSU (East Tennessee State University), working on my Engineering
Degree from 1995-1997.
Attended UT (University of Tennessee), worked toward my degree in General Engineering during 1997.

SECURITY CLEARANCE:
Top Secret issued in 1981 by Lockheed

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 51 to 100 of 944)

Go to Search Parameters...

Brief Description

25 years in coal mining experience, willing to relocate, hard worker, willing to work overtime, available as soon as possible

Advanced engineering education with a MS degree in Mineral Economics. Emphasis in Financial Risk Management, Advanced Mineral Asset Valuation using MonteCarlo Simulation and Option Pricing Theory, Investment and Portfolio Management, Bilingual Spanish-English

Welder trade over 16 years +welding supervisor oil and minning industrie

Heavy Equipment Technician - Canadian Interprovincial Journeyman - 20+ years experience in truck and coach, heavy equipment, and diesel engine repairs. For the past 14 years have been heavy equipment technician for a John Deere Dealer.

Automotive Electrical Fitter Trade – covering Heavy/Duty mining and agriculture equipment working on Cat equipment and assorted mining equipment on sites in southern cross WA

A 30+ years experienced mining equipment maintenance manager. Working on projects in the USA and overseas in positions from mechanic to manager in underground and open pit mines.

Water well driller, TH60, T4, CP RT1800, Air & mud rotary, DTH, Under reaming

Over 18 yrs underground const. & mining experience. Roof support & bolting, ventilation, and direct supervision of employees. Current mine foreman/examiner certificates. Working knowledge & understanding of MSHA regulations. Teach, practice & enforce safety. Strong work ethics & leadership skills

Can operate machine tools for cutting metals and forming metals, mechanical technician

Multi-skilled artisan with 24+years mining experience.

Mine surveyor with eight years experience in carryout surveys for open pit mining.

I have over 19 years experience as a qualified maintenance/diesel fitter working in both gold mines and various workshop based jobs and more recently as a Mechanical Supervisor in Africa. During my last and previous roles I have been in supervisory positions.

Heavy Equipment Mechanic

Trade Skill: Tradesman in Heavy Duty Diesel Fitter/Mechanic

NCC in Diesel Plant Fitting- repairs to vehicles, engine overhauls, troubleshooting, planned maintenance, preventive maintenance

I have been a electrical/electronic repair for over 15 years. I can repair anything electricial

mining work on heavy eg.

20+ Years of experience in drill and blast procedures

Quality control inspector

Qualified Welder, Specialised Welding, Semi skilled Boilermaker, Line boring, Supervisor, Jnr. Plant Operator

Skills: Shift Supervisor, Air Jumbo, Electric Hydraulic Jumbo, Remote Control Electric and Diesel Scoops, Haulage Trucks, Boart Long Hole Drilling, Blasting, Jack leg, Rock Bolting, Cavo, Timbering, Staging, Slusher, Development, Raise Mining, Mine Rescue, Fire Fighting, First Aid

Over twenty one years experience as Heavy Duty Mechanic, seventeen years with underground mining contractors. Over eleven years experience as Master Mechanic and Lead Hand.

I am a experienced industrial electrician/electrical supervisor of fifteen years. My electrical experience is in the mining and rolling mill industries. I also Possess my MSHA and West Virginia electrical certifications up to and including high voltage for underground and surface work.

I am applying for a Maintenance Supervisor, Chief Mechanic or Rig Mechanic position. Please see my attached C/V. I am very interested in working offshore but have 7 years experience on land rigs. I do have my BOSET course and have updated my other certificates. I realize that I don’t have the offsho

March 24, 2007 Electrical Technician / Electrician

Mobile Equipment Maintenance position sought. I am a Mechanical Engineering Technologist as well as a certified Heavy Duty Mechanic with over 30 years of experience. I have excellent trouble shooting skills in hydraulics, electrical, and mechanical systems.

Internationally Experienced Heavy Equipment Mechanic - Workshop Supervisor

I can maintain, repair, disassemble & rebuild any piece of Heavy Equipment, Mining, Drills, Scoops, Shovels, loaders, dozers, Tractors, earth moving equipment, on & off road, transport trucks & trailers, logging, forestry, & construction. Propane, Diesel, Gas, Electric, and Hydraulics,& more

Mechanic,Electrical Foreman

over 10 years experience in electronic and over 2 years offshore electrical.

Exploration Geologist and well aquented with the mining and Exploration Software , almost 4 years of experiance. in Mining and Exploration.

Eqiupment Operator Open pit mining Haul Trucks 100ton to 330ton Tigers Dozers 10+ years big mining operations on dumps, high walls, and P&H shovel floors.

Welder ***16 years of Experience*** Incredibly Hard Worker

Caterpillar 3516,789,793 haul truck and support equipment mechanic and supervisor,associate degree and teams management training

10 years experience with heavy equipment and industrial service and repair

20 years of construction and equipment operator and house and equipment repair

Jounyman Heavy Equipment Mechanic

16 YRS OF MINING operating varies types of Equipment dedicated to what I love

A dedicated heavy equipment operator with 15 years of open pit mining experience. Supervised the daily production of sand plant operations. Including the harvesting, processing and staging of open pit materials. Experience working with numerous soil types.

Geologist and mineralogist (double degree, diploma). 1 year experience in mapping, supervision (rig and camp), underground, grass root exploration and production.

19 yrs of hard rock mining experience (ie: copper, gold) as well as diamond mining. Will adapt to most enviroments and willing to work overseas; will reply to all responses. Sincerley Stu Hogg

Training and trade testing of apprentices

Heavy Equipment Operator

I have 8 years experience in a large cement plant where I was a Millwright for 6 years. I also was a leader of the Safety Committee and I have a strong knowledge of the MSHA regulations

I am looking for a position which carries high impact as well as new challenges.

Worked surface mining 14 years heavy equipment

team player, I can work safely even with minimal supervision. proficient in in underground and surface drilling.during my last employment i was awarded with safety performance recognation.

Mining experience 20 yrs. Leader in all facets of underground mining,stope drift and timber leader. Jumbo jackleg stoper, heavy equipment truck to 40 ton tamroc jumbo, common core, Ontario mining certificate, various safty certificates, mine rescue certificate.

Presently have 32 years of sawmill and planner mill experience Operated all heavy equipment involved with lumber operation Safe work habits witch are indicated by 1 incident in 32 years Excellent mechanical knowledge

A dedicated, committed individual who is both practical and adaptable positive and versatile a self-starter with an ability to motivate individuals to achieve results a team player.Years of experience in the industry, wanting owrk overseas. flexible and reliable

1 [ 2 ] 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out