Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #87752 next resume »»
CONTACT INFORMATION:
View contact information...

Objective
To take my skills and talent that I've acquired as a craftsman and business owner and put them to use for a highly respected, reputable company. To put my natural leadership skills and ability to supervise to work for a company that takes pride in it's quality and attention to detail.

Qualifications
Most recently I have owned my own framing business for the last 9 years. I have continued to work on the job sites to ensure my product is nothing less than exceptional. With my experience in the construction industry being so varied, I have gained my Class A to operate various tractors, trailers, trucks, and pieces of equipment. I have always maintained and worked on my own equipment and vehicles, my skill and experience in mechanics dates back to when I was a teenager working out of our own garage. My skills are diverse, as I have worked in many areas of construction, including roofing, siding, block, plumbing, stucco, demolition, and general remodeling. I have also worked both residential and commercial, single family and multi-family projects. I work well with others, possess strength in leadership, and communicate well with homeowners/ clients, contractors, inspectors, and other subs alike I have experience in heavy equipment operations including- skid steers, many all terrain fork-lifts (Petty bone, Lull, Ingersol-Rand, New Holland), dump trucks, day cab tractor trailer, doc trucks, clam trucks, mini track hoes, and a variety of tractors. My driving record is clean and health card current.

Relevant Experience
7/2008-1/2009 Ice O-Metric Contracting Inc., Big Lake, MN
General laborer. We worked on the St. Cloud Army National Guard helicopter base addition. I installed a foam insulated steel panel system and commercial grade steel trim. Misc. steel framing. All Commercial.

2/2003- 6/2008: Morlock Construction, Zimmerman, MN
Owner and supervisor for framing crew. I read blueprints, created bids, and framed new construction and remodel, while acting as the job superintendent for the builders that I worked for. Jobs have included both single family and multi-family projects.

9/2005-7/2005 Brylock Contractors, Gulf Port, MS
Partner/ owner. This was a partnership that was formed by myself and another individual in response to the need for workers in MS after Katrina. Most of our work was non-profit, and when I say non-profit, I mean we did not charge for our services. We did demolition and rebuilding both residential and commercial.

7/2001- 2/2003: MBM Construction, Zimmerman, MN
Partner/ owner. A three way partnership of a new home construction framing company.

Other companies employed with:
CSN Construction: Zimmerman, MN
Remodeling and additions.
Chad Nasby, owner, 763-286-7322

Bakken Builders: Big Lake, MN
Sub-contractor, framing, remodeling.
Commercial and residential.
DJ Bakken, owner, 763-263-3900

Palmer Homes North: Ramsey, MN
Framing and remodel.
Jason Palmer, owner 763-464-2511

Cairnes Construction: Elk River, MN
Lead carpenter, crew supervisor. New home framing.
Rob Cairnes, owner, 763-238-7340

Sierra Corporation: Blaine, MN
Lead carpenter, new home framing.
John Likum, owner, 763-783-9616

Mark's Stucco: Ramsey, MN
Stucco laborer
Mark, owner 763-427-7344

Anderson Plumbing: St. Francis, MN
Out of business, number not available

All Home Remodeling, Greenfield, MN
Framing, general construction.
Ray Schreckenghaust, owner, 612-685-2676

Viking Pattern and Mold, Blaine, MN (1990's)
Mold maker
763-746-4004

Carley Foundry, Blaine, MN (1990's)
Mold Maker
763-780-5123

Certificates/ Licenses
Class A CDL, MN.
Forklift certified
Permit to carry a concealed weapon, MN.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 601 to 650 of 945)Go to Search Parameters...
Brief Description
Unlicensed Engineer, Diesel Mechanic
Apprenticeship exemption granted for the technical in-class component Levels 1, 2, 3
Mining Engineering with MBA
Over 20 years management, construction, production and sales experience dedicated to achieving profitability and delivering outstanding customer service. Energetic professional with exceptional analytical, organizational and people skills. Strong personal ethics and integrity. Treat each customer as
I am trained in the mechanics and operation of back hoe, bobcat, jack hammer, dumptruck, forklift, sissor lift, crane(boom truck), delimber, and rock crusher. I also have skills with tack welding, drafting and construction.
Good at learning and implementing, target oriented, flexible and can work under any conditions
30 years in the repair and maintenance of heavy equipment in both shop and field setting.. Supervision experience !
Machine operator maintenance personel quality lab tech. Geology major consulting major sales
Fitter Including Machining and Diesel Fitting
Construction manager, laborer, Class A CDL Drivers license, mechanic
Maufacturing Automation
Operations Manager,Plant Manager,Equipment Manager, Maintenance Manager
My capabilities have been achieved through many experiences which include training and support of in-house staff in multiple locations, while working on concurrent projects as a Sr Designer/Project Engineer.
HSE Mechanical Engineer. Quality, Safety and Environmental issues skills.
Free! Industrial construction electrician with two years maintenance in open pit mine
I graduated from Associated Training services for Heavy Equipment Operator .N.C.C.E.R Certification on a variety of excavating equipment .I have a Class A CDL with Tanker Endorsement.I am a hard dedicated worker and a fast learner..
Remote Paramedic, Firefighter, Paramedic
City and Guilds Diploma in Electrical Engineering,Apprenticeship training,5 years experience.
D.A.E. (Mechanical) 1970/3300 Second 1989
I am a Structure / Civil Engineer with 12 years expertise in Structure and infrasturctures for Petrochemical, Oil & Gas, CPO (Crude Palm Oil), Mining, Geothermal Power and Cement Projects
Dynamic professional with solid 22 years of experience in the shipping business and 4 years of experience in the document management engineering field, aims to respond to new challenges and contribute effective in the shipping and engineering field.
Experienced Heavy Equipment Operator/Open Pit Miner/Willing to relocate
Experienced Mechanical engineer as Tunneling specialist in operation,maintenance,construction tunnels and executing projects.
MINING/TUNNELING/MECHANIC
I would like to bring to your kind notice that I have got Ph.D in Hydrogeology, post M.Sc. (Tech.) in Hydrogeology, M.Sc Geology from prestigious Andhra University. I am having 15 research publications in National and International reputed Journals. I have Completed 2 major Research Projects
I have over 25 yrs experience in the oil and gas industry in various positions and with my technical training of 3 trades which are as follows; Licensed H.D. (diesel) mechanic, Licensed millwright, and Licensed motor mechanic I believe that I would be an asset to your organization.
Underground Blackhat Miner, EMT Miner Certification, Double-head Fletcher, Roof Bolter, Operate 488 Scoop
Engineer / EMS / SCADA / Electrical / Telecom / Power Sector
Admisnistrador de sistemas, Systems Administrator, Ingeniero de Sistemas, Systems Engineer, Ingeniero de Software, Software Engineer, Ingeniero Telecomunicaciones, Telecommunications Engineer, Project Manager
GIS Analyst/ Geoscientist...M.Sc. Geology, M.Sc. GIS, Cert. Data Processing and Info Tech
My skills are in construction, fabrication, maintanence and electrical HV fitting. I have CN, LF and WP tickets. First aid cert.
HR driver licence [Austr], Austr QF cert 3, Austr ESI cert 3, International switching Authorisation up to 88kv, Victorian line worker registration, WA licence for High Risk work, First Aid, Oh service testing [Metrel, NST], Safety blue card, EWP card, Internat Maint Electrician 4yr appy + 8yr exp
Geospatial Analyst with over 10 years in GIS, 4 years in remote sensing, 8 years in autocad, 4 years offshore drilling, and a Geology degree.
Areas of expertise include Civil/ Mining Management, Construction Supervision, Project Management and Procurement.
Environmental project scientist with project management experience in the areas of oil and gas and dry cleaners. I have extensive Phase I and Phase II experience. I have a proven track record of being on time and within budget while working on multiple projects.
Dual Post Graduate Mechanical Engineer with 10 years of experience
In May 2009 I will graduate from Texas Tech University with a Masters Degree in Transportation Engineering, with 3.66 GPA. With over 1 year of experience in Commercial Project, I have developed a strong background in Planning and designing.
If you read my work history you will see a great amount of experience in very relative systems to the position I am applying for. I can't say I know it all, but I have been exposed to most of it. As Manager or Superintendent, I have administered and negotiated labor, materials and services.
Diesel Fitter (Heavy Earthmoving), Maintenance Planner (Mobile), Project Manager (MARC), Maintenance Supervisor, Workplace Trainer and Assessor
I would like to express my interest in an entry level position in your Company. I completed M.Sc in Applied Geology from Jadavpur University in 2006 and now I completed my M.Tech in Mineral Exploration from Indian School of Mines University, Dhanbad and obtained first rank in M.Tech Mineral Exp
GIS, Geophysical Data Processing, Mapping, Airbone Surveying
Experience working Saudi ARAMCO & SABIC for Oil & Gas and Petrochemical projects as QC inspector or supervisor. Familiar with International Standards like NEC, NETA, IEC, NEMA, IEEE. Excellent in Computer work hardware & software. Experienced works in different field of Electrical Engineering.
I am able to effectively perform set tasks, successfully fulfil the task objectives and meet their dead-lines. I report information to the necessary authorities by means of written and/or verbal reports which are reliable and accurate.
Passion for safety; Proven skill to integrate owner/client needs with worker abilities; Deep intuitive understanding of motivations/goals behind differing party's actions; Experience-driven, reality-based understanding of varying industries and their roles in global development
QC Mechanical, API 570, API 653, CWI & NACE coatings inspector
I rely on over 14-year experience in Instrumentation & Control Engineering in FEED & Detailed Design Engineering, Construction, Supervising, QA/QC, Commissioning, Testing and Maintenance of Oil & Gas (Offshore, Onshore), Refining, Petrochemical and other major projects.
Free! Chemical process operator, Heavy equipment operator, Emergency Response Team Captain, Health and Safety member,
Over six years experience working as an engineering and environmental geologist. Manage, coordinate and field supervise all drilling activities and field work for large scale geotechnical and environmental projects for government and industrial clients in the eastern United States and Africa.
maintaining and operating various types of heavy equipment in the forest industry, building industrial roads, road deactivation
I am qualified to work as an analyst, appraiser or consultant. Would welcome assignments in operations research, finance, market research, data processing and related areas.
1   2   3   4   5   6   7   8   9   10   11   12   [ 13 ]   14   15   16   17   18   19  
Seach Parameters

Change search parameters...
CATEGORIES: Trades/Skilled;
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com