Resume - QualificationsI have worked in the repair related field for over 23 years. I own...

Misco Jobs

Resume #9059

CONTACT INFORMATION:
View contact information...

Objective
I would like to obtain a position working in the international market place as a mechanic or a working supervisor doing fleet maintenance, generator repair or heavy equipment repair.

Qualifications
I have worked in the repair related field for over 23 years. I owned and ran a repair shop for the last 13 years working on both gas and diesel repairs. I managed between 10 to 15 employees year round as well as the day to day operations of the business. I worked in the shop as well as in field repairs. I have worked up on the North Slope in Alaska's oil fields doing on site repairs as well as many other sites around Alaska. I am up to date with the use of the latest diagnostic equipment scan tools and lab scopes. I have used M.P.S.I., SNAPON and O.T.C. scanners doing on board computer repairs. I have done all types of electrical repairs and extensive wiring. I am a self starter and work well without supervision. I am very accustomed to working long hours each day and working until my task is completed. I am a very good problem solver and work well under stressful conditions with others. I worked in a Kuwait in a D.S. maintenance shop for K.B.R. until March of 2004. I then transferred to Iraq to to work in the generator dept. in at Babylon. In April I was made a Forman and was then promoted to acting supervisor for all the coalition sites in June. I in this position was required to aid all the mechanics of the other sites in the repairing and the maintenance all generators as well as the ordering of required parts.

Education
I completed high school then attended Denver Institute of technology in Denver Colorado. This was a two year trade school. It was a gas and diesel technology course with heavy electrical classes. I then attended the University of Alaska; there I took many general education classes with a emphasis in math and science. I have taken numerous trade classes in computer diagnostic, air-conditioning, and fuel injection repairs as well as the use of lab scopes and scan tools. Each year I would try to take 3-5 classes in order to stay current.

Relevant Experience
I have worked as a mechanic for over 23 years. I have worked in both heavy equipment repair as well as more complicated fuel injected computer controlled systems. I have lived and worked In many remote parts of Alaska as well as Iraq and Kuwait and fully know what to expect while working in remote locations as well as other countries. I have spent a great deal on my working time a lead person at my job and have no problem interacting with others.

Work history
2-01-04 to present I went to work for KBR in Kuwait in a D.S. maintenance unit for the United States Army working on light to heavy wheeled vehicles. I did electrical repairs motor installs transmission replacements, fuel injection repairs and on board computer repairs. I was transferred to Iraq at the end of March and at that time I went to work in the generator dept as a mechanic/Forman. I maintained and repaired generators in the range of 5 kw up to 1250 kw prime power units. I order all the required parts for the dept as well as new generators. I set up a maintenance program for all seven sites in the coalition sector and assist in repairs at other locations if the mechanic at that location is unable to complete the required repair. We work on Perkins,Volvo, Cats and Cummins diesels generators.

10-01-91 to 1-31-04 I worked and owned Palmer Repair. I did light and heavy line repair work. I did all types of repairs to include fuel injection, motor replacement, transmission replacement, electrical repairs, and computer systems repairs. I worked on both gas and diesel engines minor and major repairs. I was I.M. certified to test and repair emission systems as well as air-condition repairs. I reprogrammed computers on late model trucks and cars to include both gas and diesel vehicles. I also worked on a variety of different equipment to include generators, and tractors. I have extensive experience with the use of lab scopes in the commission of derivability repairs to include power stroke diesels, 6.5 international diesels, and other manufactures to include Chevy, Dodge, Ford, and International.

02-15-89 to 9-15-91 I worked at R&R Repair in Alaska. I did all types of general repairs on both gas and diesel engines. I did all types of heating and air condition repairs. I did I.M. testing and repairs which includes fuel injection, computer diagnoses and electrical repairs. Most of the work at this shop was light line with a few transmissions and engine overhauls.

Personal information
I am 42 years of age and in very good health. I am single with no children. I like to travel, I do not smoke or use drugs of any kind.

Reference:
Will be provided.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 351 to 400 of 945)

Go to Search Parameters...

Brief Description

QualificationsI have worked in the repair related field for over 23 years. I owned and ran a repair shop for the last 13 years working on both gas and diesel repairs. I managed between 10 to 15 employees year round as well as the day to day operations of the business.

I'd like to switch careers and have a get er done attitude

I am qualified on Remote Control scoops. I run haulage trucks ,cages ,skips, crushers ,conveyors,and most any underground mobile equipment.

To obtain full time employment as a heavy equipment operator in the oil sands.

15 years experience of Finance Analysis, Cost Control, Finance Reporting and Internal control experience / OIL AND GAS INDUSTRY ‘ KEY PERFORMANCE INDICATORS - KPI expert performer and designer.

I have a wide on and offshore range of experience in heavy equipment installation, commissioning and maintenance. Managing and supervising day-to-day preventive maintenance.

Designing, putting on service and managing 9 years whole logistics of implementation a national network for 10 billion clients

Underground Miner/Equipment Operator

I would like to utilize my skills as a beltman and to learn more in the coal mining business.

Pipe Fitter, Foreman, General Foreman.

11 years of heavy equipment operation and supervisory experience

boilermaker with fitting and welding experience in mining ,construction and hydraulics

I am a surveyor looking for a rewarding job.

20+ yrs experience surface and DTH

360 excavator operator with 8 years experience

Knowledge in operating the electrical equipments

Technical Author, Trainer, Project Manager

I have done a little of machinery work with bob cat and backhoe. I have completed a course in Generic Induction to surface coal mining. I am a confident welder and have been working with mig and stick welders for the past 5 years.

Experenced equipment mechanic currenty working for a Caterpillar dealer

Certified Welder, Forklift/Crane Operator

Experienced and expert on operating heavy equipment machines

Crane specialist. Heavy duty mechanic, mobile crane operator, trade licences. Towercrane ticket, and presently apprenticing as milwright to further my skills. Operate and repair many makes models of hoisting equipment. Rigging, inspection, supervision skills + more 20yrs exp with industry leaders

Registered Electrician with 20 years expirience trained in gas and electric arc welding, Basic First Aid, Lathe operation, Certificate in Computer Technology and two yearly Cardio Pulmonary Resusation and Saftey training for Electrical licence

Motivated, energetic, pro-active, confident go getter committed and thriving on challenges. Always striving to keep abreast with latest technological research anddevelopment. Quick learner with an eagerness for supplementary enlightenment. Strong administrative, technical and interpersonal and skil

Heavy duty auto eletrician, 18 years expat Caterpillar dealership experience,work includes pipelines and mines.

Caterpiller Trained Heavy Diesel Fitter with open cut and underground Experiance on Caterpiller, Tamrock, Leiberherr equipment

Millwright, Mine /Concentrator, Construction,Auto sector, Electrical,PLC experience

I can drive semi, payloader, tractors, good with tools and at fixing equipment

Engineering Tradesperson (Fabrication) (Boilermaking)

Experience has been gained operating from supervisory, management and design standpoints on a variety of E&IC contracts within the U.K. and overseas.

17+ years contruction electrician foreman, electrical engineering and PLC experience. The majority of which was obtained on high profile DOE contracts; DOE Q cleared; BSEE

I'm qualified to work underground with my underground hard-rock common core, i am also qualified to work as a Registered Practical Nurse.

Senior Exploration Geologist with excellent international experience in various commodities. I am searching for short term or permenant employment at a CEO Exploration Manager. Experience includes multinational and Junior companies in various parts of the world.

skid steer, mini excavator, certified clear cutting, underground apprentice, surface apprentice

Heavy Lift Manager

worked in the Middle east on Power plants for 2 and a half years, stat generator sets

Journeyman Millwright (Industrial Mechanic) 4 years overseas at a high altitude gold mine. 6 years working in various industries in western Canada. 36 years old.

Broad and diverse drilling experience with specific in-depth knowledge of Tamrock DK-75 & DK-95 Double Pass, B&E series 49R Electric, P&H 1200 Electric, Atlas Capco 271 & 351 Pit Viper, and Atlas Capco Rock-8 Pre Split Drill.

Project Manager or Owner Representative. Over 25 years of experience in Industrial Instrumentation and Controls (I&C) engineering, construction, commissioning, start-up, operations, maintenance and training in a variety of industries. Project Management Professional (PMP) Certification #1200696.

Heavy Duty Mechanic

Energetic Maintenance Manager seeking employment out side Africa, I’m Self Motivated Self Disciplined and have Extensive Experience in Managing Large Opencast Mining Fleet and Large numbers of Work Force

Condition Monitoring Technician - Vibration Analyst Cat III (ISO 18436.2 2008) 15 years experience. CSI and Bently VA products, Fixture and Pruftechnic Alignment experience, Flir Infra red camera experience. Mechanical Commissioning Supervisor - Nickel project 10 months)

Experienced underground Miner I, with six years underground experience. Seeking mining job preferably in Alaska, but will consider other areas.

Need a welder?

More than 30 years experience in the field of General Engineering, Plant Maintenance Management, Project Management, Telecommunications, Electrical/Instrumentation and Process Control.

Blueprint reading ,Hydraulics,Sheet metal layout, fabrication,Mig, Arc, Gas Welding,3-phase electric motors, Underground explosives

Intermediate Mining Engineer with several years of practical underground metals mining experience.

Heavy Equipment Mechanic/ Operator/ Welder or Mill Maintenance Mechanic.

an experienced radio communication technician and electronics technician

Machinist,C.N.C. / Manual 20+yrs. experience

1 2 3 4 5 6 7 [ 8 ] 9 10 11 12 13 14 15 16 17 18 19

Seach Parameters


Change search parameters...
CATEGORIES: Trades/Skilled; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out