Misco Jobs
|
Go to Job Seeker's Center »»
|
«« previous resume
Resume #15567
next resume »»
CONTACT INFORMATION:
View contact information...
SUMMARY OF QUALIFICATIONS
Production Manager
Process Engineer
Project Engineer
Metallurgist
Professional Engineer registered in Alberta, Canada ~ 708-426-3990
EDUCATION
Natural Gas Processing (Grad Chemical Eng. Course), University of Calgary, Calgary, AB, Canada
MBA Course Work, Laurentian University, Sudbury, ON, Canada
Bachelor of Engineering (Metallurgical), McMaster University, Hamilton, ON, Canada
EMPLOYMENT HISTORY
AMERICAN STEEL FOUNDRIES-KEYSTONE 2004 – Present
1700 Walnut Street, Granite City, Illinois, 62040, 618-452-2111
Quality Control Engineer
- Directed Operations in reducing scrap rate.
- Analyzed scrap defects to determine cause and solution.
BIG RIVER ZINC COMPANY 2003-2004
2401 Mississippi Ave, Sauget, Illinois 62201 618-274-5000
Production Supervisor (Temporary under Contract)
- Responsible for operations, safety and shift management of the electrolysis department. Managed around 20 unionized employees on the 2nd and 3rd Shift.
- Solved production problems.
THE DOE RUN COMPANY 1999 - 2003
HC 1 Box 1359, Boss, Missouri 65440 573-626-4813
Smelter Metallurgist (Lead-Acid Battery Recycling Division, Boss, MO), 2001-2003
- Technical assistant for operation of blast furnace, reverberatory furnace, refinery, battery desulfurization unit, and wastewater treatment plant.
- ISO 9001-2000 Certified Internal Auditor.
Hydrometallurgist (Mining and Milling Division, Viburnum, MO), 1999-2001
- Technical consultant to international smelters for the Engitec Flubor Process.
- Solved leaching and electrolysis problems during start up and operation of pilot plant. The pilot plant proved the technical and economical viability of the Engitec "Flubor ® Process". The process is the world's first electrowinning lead process.
ASARCO (Encycle) 1995 - 1999
5500 Up River Road, Corpus Christi, Texas 78407 361-289-0300
Facility Manager
- Operations Manager for 3 departments (half of the plant) of a unionized plant.
- Started up a new operational department: revised the process for greater safety; authored the operating instructions; initiated process improvements.
- Achieved higher sustained production by initiating process improvements. The feeds were highly variable, corrosive, caustic, pyrrophoric.
ZINC CORPORATION OF AMERICA 1989 - 1995
Bartlesville, Oklahoma
Technical Manager
- Retained by senior management during temporary and permanent plant closure. Was a key employee for re-opening the plant under the electrolytic zinc or other novel metallurgical process. Produced feasibility and environmental studies. Operated the chemical laboratory.
- Conference presentations to Canadian and American Zinc Producers Association.
Superintendent of Hydrometallurgy
- Reversed profit-losing situation by solving problems in process chemistry, long-term maintenance, and supervisory and union personnel issues.
- Set several production records for zinc and cadmium tonnage.
- Managed an 80-employee operations department.
Process Engineer
- Technical representative for ZCA. Evaluated Mitsui zinc powder manufacturing technology used in alkaline batteries. The evaluation resulted in a new, jointly owned ZCA-Mitsui plant built in USA in 1996.
NATIONAL LINEN 1986 - 1989
Fort Myers, Florida
Operations Supervisor
As first line supervisor managed 15 + people in this industrial laundry.
SELF-EMPLOYED CONTRACTOR 1984 - 1986
Red Deer, AB, Canada
Contractor
NOVA CHEMICALS CORPORATION 1980 - 1984
Joffre, Alberta
Project Engineer
- Coordinated the design and installation of a compressor station and Waste Water Treatment effluent diffuser.
- Novacor's representative for the architectural/engineering design of the head office.
- Audited the plant's mechanical integrity to prevent a vapor cloud release.
NORANDA-FALCONBRIDGE-TEXASGULF 1975 - 1980
Timmins, Ontario, P4N, Canada
Development Engineer
- Co-invented the Zinc Arsenate Process, (still in use after 25 years)
- Designed and commissioned the plant.
ATLAS STEELS 1974 - 1975
Welland Ontario, Canada
Metallurgist
- Physical metallurgist in the rod mill.
LICENSES AND TRAINING
- ISO 9001 – 2000 Certified Internal Auditor
- Recently I have undergone a US government background check as my son is completing his Top Security Clearance for the US Air Force
- Computer skills: Excel, Word, and PowerPoint
- HAZMAT 40 hour training, with current annual HAZWOPER training
- Operated: AA & DR Spectro-photometer, wet chemistry, Low Alpha Radiation Detector
- Fluent in Polish. Understand some Russian and French.
PATENTS
Co-Invented the process: The Recovery of Arsenic as Zinc Arsenate and its Utilization in the Purification of Zinc Plant Electrolytes. U.S. Patent 4,240,826
Through my research contributions the Doe Run Company obtained a larger ownership of the patent rights to the Engitec Flubor ® Process.
View contact information...
«« previous resume
next resume »»
Search Results (Resumes 101 to 150 of 652)
Go to Search Parameters...
Brief Description
Tax Specialist
Metallurgical Engineer, Project Engineer, Operations Manager, Primary metals, petrochemicals.
Supervisor Forman/Driller International
Truck Driving, Safety and First Aid Courses
Exploration Geologist. Worked in China and Australia on Gold and Tantalum projects respectivly.
To obtain work in the mining Industry using my experience as a warehouse attendant.
Geological Engineer, mapping, petrography, reserve estimates, exploration, mining, import/export, well drilling, GPS, logging, geoframe, geographix, excellent vocational English, MS Office, MBA in Business Administration, Experience in Marketing
I am very keen to work outdoors and have a great love of the West Australian outback. Therefore I am keen to work as a Haul Truck Driver and progress from there.
I have been working as a cook for many years now and I possess over 25 years of experiences in the domain. Just to give you a brief idea, I worked as a cook for over ten years in a bush camp with over 40 people to my charge (for treeplanters, hunting and fishing resort and for a Mining Exploration
Executive management of environmental work; can program in several computer languages.
I am a geologist looking for a new challenge outside the borders of South Africa. I have experience in exploration and mining geology. My mining background is opencast and underground. I am currently doing my masters degree on roof stabillity problems in underground coal mines.
I am an hse professional having qualifications like MBA,NEBOSH and IOSH, presently working in Afghanistan as HSE officer in KBR(UK) , I am willing to work any where in the world.
I am available for work & was recently working for P.S.N. through Orion Engineering, as a Senior Material Controller in Azerbaijan & Georgia, for the client B.P. Exploration (Caspian Sea) Limited and would be very interested in any future Oversea’s positions.
Telecommunication, Health, Safety, Environment and Security Coordinator
I am former Firefighter specialist in Rescue (Confined Spaces) and Hazardous Materials.
Qualified bogger operator
Equipment Operated D-10/D-8 dozer/welder/ rock truck/ hitachi 430 excavator cat 988 end-loader/cdl coal truck
I am a post graduate in Production engineering with over 18 years of experience in heavy earth moving equipment and auto vehicles
Commercial driving skills, safety and first aid courses
Electrical Professional available prefer exploration camps and remote locations
I have been in the Mining Industry for just over 8 years. I am a very dedicated hard working employee. I have underground mining experience in production, development and backfill.
I graduated with a Masters of Geology (2:1) from the University of Leicester in 2006. Since graduating I have worked as a drilling engineer in Oman and am currently working for the University of Leicester and the Diamond Trading Company and am producing a graduate certificate for them.
I hold a JD as well as an MBA in finance and have been a land manager for mining companies for the last 10 years. I am very well trained at acquisition, due diligence, negotiation, sales, entitlement, permitting and construction techiques. I have excellent references.
management, skilled labor, supervisor, computer, jack of all trades
Chemist
B. Sc. - Dissertation in Polymetallic Ore
Recently completed 40 hr underground mining class, and obtained certification. I am a hard worker with high regards for safety. I have experience working with and maintaining varios types of machinery,
I have been mining for about 8 years now With Eroc I was on the Development Bogger Before that Barminco at Plutonic WA as a Production Driller I was even thinking of maybe working overseas if the chance comes up
I am full time cartographer
Free!
Legal and Commercial Consultant specialising in Project and Contract Management. Specialist in O&G, Environmental, Engineering and Utilities
An experience individual with excellent knowledge of Freight handling / Exports Management with the objective of achieving organizational goals and making it a strong profit center, seeks an opportunity in managerial capacity.
Nineteen years of experience (Five year in Gulf) in varied discipline of Engineering i.e. Quality Control and Assurance, Inspection and Expediting, Piping Specification, Material Handling equipments & system specification, Shutdown maintenance Inspection, Construction Site Inspection(Piping,PV)
Operations, Technical, Contract, Leadership, Surface, Underground, & International Experience
I am a 2007-08 Mining Engineering graduate of the University of Kentucky's program with nearly twenty years of work experience in various capacities of Land Development including Project Management.
my skills and qualification shuold be display to the employer
Environmental geologist
I am ready to work as a helper/assistant.
SAP,JD EDWARDS,SYSTEM ANALYST,ABAPER,SAGE HR
Supply and Logistics Superintendent
Highly experienced project professional with broad engineering, maintenance and construction experience. Competitive by nature with a consistent focus on the “Bigger Picture”. Outstanding track record and highly adept at managing high-criticality maintenance and construction projects.
I am a Mining Engineer with nine years experience. I also have two years of credits in an MBA program. I am currently employed in the automobile industry as Internet Manager. I have four years sales experience and have been recognised as one of the top sales people in the South East Region of USA.
First class Analytical Skill with 10+ yrs of experience in Copper Industry.
Engineering/Project Manager skilled in organizational/project management/business development. Highly skilled in client relations/development. Diverse experience in environmental consulting/nuclear power/regulatory compliance/facilities/systems engineering/infrastructure projects.
EXPERIENCED HEALTH/MEDICAL PHYSICIST-ENGINEER-SCIENTIST
GIS, geomatics, ArcGIS, ESRI, Cartography, Map, Mapping, Geography
I trained as a technologist in the field of Geology and work best with little motivation and with little or no supervision
International Business Manager, fully Bilingual and 11 years of management and business development experience and multicultural background. I have managed high demanding teams and complex business for the Colombian and International Industry working for various multinational companies. Deep hands
* Driller 3-supervising/training drillers * 6 years experience * LM Rigs 37 - LMA110 and kempe underground * udr1000 - udr1500 surface * excellent safety record * excellent organization skills * strong work ethic
I am a student, graduating from the University of Alberta, Edmonton, Canada. I have experience in the high arctic, doing regional and local mapping. My research thesis is on BIF's, and their mineralogy. I am looking for a junior field oriented position in Exploration Geology. Willing to travel!!
I have been a Firefighter since 1990 and am considered to be a keen and effective senior member of the Defence Fire and Rescue Service. I am a mature, self-motivated and well-organised person who enjoys a challenge. I offer reliability, punctuality and commitment.
1
2
[ 3 ]
4
5
6
7
8
9
10
11
12
13
Seach Parameters
Change search parameters...
CATEGORIES:
Other;
INDUSTRIES:
Mining;
Change search parameters...
Keywords:
(e.g. mining engineer)
Find results with:
ANY of the words
ALL of the words
WITHOUT the words
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to
Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.
How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".
More Frequenly Asked Questions...
Employer's Center
»
Employers Home
»
Feedback
»
Help
»
Post Jobs
»
Edit/Delete Jobs
»
Search Resumes
»
Resumes By Email
»
My Account
»
Log In
»
Log Out
©1999-2008 Misco Jobs. All rights reserved. Contact:
support@miscojobs.com