Resume - I have travelled extensively through Europe and lived in Spain, Italy and Brazil...

Misco Jobs

Resume #3488

CONTACT INFORMATION:
View contact information...

OBJECTIVE
Seeking an entry-level Mechanical Engineer position.

EXPERIENCE
Guzik Technical Enterprises, Mountain View, CA, USA.
Mechanical Engineer, March 2004-Present.
-Provided quality support to company's production floor, keeping drawings updated, isolation, and rectification of production problems and verification of engineering changes.
-Responsible for the redesign of existing components of test equipment for disk drives and magnetic heads manufacturers according to costumers request, design verification and design validation.

University of Ancona, Italy.
Graduate Student, July 2001-July 2002.
-Studied the behavior of commercially pure titanium (CP2), from a well known Titanium industry, during the hot rolling process in order to avoid possible cracks.
-Studied the kinetics of dynamic and static recrystallization of titanium CP2 to improve the process of rolling the material, evaluating the effects of temperature and strain rate on the titanium deformation.
-Analyzed the structure of titanium specimens before and after hot deformation by scanning electron microscopy (SEM) and optical metallography.

ACCOMPLISHMENTS:
-Obtained Stress-Strain curves using the torsion machine to simulate different conditions of work, and consequently determinate the value and the variation of titanium CP2 ductility for each condition.
-Demonstrated that rolling the material in two steps, with an intermediate heating in between the steps, increase the titanium's ductility by the recrystallization phenomenon. Proposed the implementation of a second step in the company's hot rolling process.

National Iron and Steel Company, Companhia Siderurgica Nacional(CSN), Brazil.
Mechanical Technician, December 1991-March 1994.
-Responsible for inspection of blast furnace mechanical equipments, troubleshooting, filling reports of equipment condition and repair orders.
-Manager of the Maintenance Department Supply Team. Responsible for the management of spares parts to attend the Inspection Team's demand including control of stock availability, ordering material from warehouse and making purchase orders.

ACCOMPLISHMENTS:
-Developed strong relationships between the supply team and the Inspection Team resulting in improvement of the performance of both teams as well as the efficiency of the Department.

EDUCATION

University of Ancona, Italy.
Master of Science in Mechanical Engineering. January 1999-July 2002.

University of Ancona, Italy.
Bachelor of Science in Mechanical Engineering. October 1994-December 1998.
Graduated with a GPA of 4.0 on a 4.0 scale.

University of Vigo, Spain.
European Study Abroad, Erasmus. January 2001-August 2001.
Emphasis in mechanical engineering.

Pandia Calogeras Technical High School, Brazil.
Mechanical Technician. January 1988-January 1992.
Certified in technical mechanics, and iron and steel works.

SKILLS
-Fluent in Italian, Portuguese, Spanish and English.
-Proficient in AutoCAD.
-PC proficient including Microsoft Windows, Microsoft Office, Photoshop, Internet research, and email.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 651 to 700 of 715)

Go to Search Parameters...

Brief Description

I am a qualified and experienced safety professional/officer.

Competent Instruments/Production Technician

An energetic, pro-active Human Resource Generalist with expertise in all human resources functions and skills in recruitment, relocation, immigration, employee relations, team leadership, facilitation and training. Fluent in English, Dutch, German and (elementary) French

Class A CDL, railroad equipment ie. spotter truck tandem dump truck, front end loader, fork lift, assorted types, sizes and hp tractors & mowers, snow removal, emergency & on call & work in extreme and inclement weather conditions, wiring, installation & preliminary programming of traffic signals.

I am a student of Physics in the third year of my bachelors degree, I have work experience in Geophysical data collection, Construction, and data processing. I have done Karate since I was 6, and I was the captain of the hockey team in highschool. I love a challenge.

Bilingual Entry Level I&C Engineer

Implementation of H.S.E. policies on and off project sites, Knowledge of fire prevention and safety practices, Field sampling for all Environmental studies, ability to make accident investigations and prepare reports, good administrative & Environmental quality management skill, good teamwork spirit

Help me to be part of workers in your establishmnet

Experienced in purchasing, buying, and expediting

Knowledge in repairing computer hardware and other components of the computer. Reprogram operating system of computers if required. Installing software’s needed by the computer. Troubleshooting computer problems.

Looking for o job with better condittions

Geological engineering technologist diploma from Cambrian College, Sudbury.

AutoCAD "2D, 3D", Customer Service, Microsoft Office, Car Supervisor Engineer etc

exp driver

Pursuing Master’s in Material Science & Engineering at Michigan Technological University, Houghton MI(May 2006)

Logistics, Oversize Goods Handling, Material & Inventory Controllers, Shipping

I am an EH&S specialist to energy, industrial and commercial clients. I have experience in soil & water sampling, soil conservation, erosion control, remedation, reclamation of oilfield sites, environmental liability models, management systems and emergency response. I am an registered P. Biol.

Forensic reviewing and reporting, 2 years engineering pipeline company, 4 years government drugs screening laboratory, GC/MS, 10+ years non wizardry speech freedom computer environment

Interested in Labour work(e.g Drilling helper) available immediately

Entry Level Chemical Engineer

Pursuing MBA Marketing. Completed BE Mechanical good at convincing people, selling skills, etc, good at computers, good communication skills

Experience in construction and as a trades assistant to carpenters, builders, electricians, bricklayers. Have exerience in cold and hot work forklift scissor lifts confined spaces looking for a career in mining

Senior Instrument Technician / Foreman "Experience: 10+years", working with one of the largest refinary in middal east.

BA-degree in Geosciences ( 4 years) graduated in 2000

Computer Programmer, Database Administrator, System Analyst

Microbiology, environmental health and safety technologies/ studies,supervison, training, research& development, safety audits/ investigations, compliance monitoring, educationa, professional and academic training in biological/ life sciences, environmental health &safety.laboratory operations

Geologist/Hydrogeologist 40hr OSHA Cert 8 hr OSHA cert

I am a trained Geologist. I am versed in working in the field. I can work well under minimum supervision. I am honest, deligent and keen to progress. I am a team player. It is best to reach me by E-Mail

I am an Advanced Rigger of 2 years experience. I have a variety of skills including Steel erection, underground work, Franna operator and Heavy lift. I am currently employed as a Heavy lift rigger for mammoet. I am skilled in all aspects of rigging including plan/ lift study reading and dual lifts.

General Manager ,10 yrs Experience; 3PL Logistics, Supply Chain Management, Freight Forwarding, International Trade, Project Management, Materials & Inventory Control, Client &Vendor Relations, Finance, Information Systems

Petroleum Technologist, Technical Support, Electrical Engineer, Oil & Gas Analyst

Manager Information Systems / Office Assistant / Data Entry Operator

An experienced Micro and Macro Level Project Management position offering an opportunity for growth in the Construction, Manufacturing and Production Industry.

Engineering Degree, analytical skills, full management skills (ISO9000:2000)

PRO-E 2001, Unigraphics, AutoCAD, Solid Works 2004 Diploma in Mechanical Engineering from B.L.D.E.Ass Polytechanic.Bijapur, Karnataka State in 2001

Computer Operator, Administrative Clerk, Data Entry Operator etc.

B.Sc. International Transport & Logistics

Three (3) years experienced in producing of detailed structural steel and concrete drawings (fabrication and design drawings) for onshore, offshore and Front-End Engineering Detailed-Design projects. One (1) year experienced in manufacturing plant as Technical Staff/ Production Engineer

Safety experience in many different settings (i.e. government, manufacturing, healthcare) with a BSE in occupational health and safety from an accredited university

MS in Mining Engineering (5years)+ Diploma of Specialization in Mining Sciences and Technologies (Post-graduate Research 3 years) - Freelance experience in QUARRY PLANNING and DESIGN (2 years)

Mechanical Fitter&assembling,Mechanical Site Installations,High School&Industrial Training Institute

GIS, Software Developer and Smart Card Programmer

I'm a chemist with a B.S. and a technical college Diploma in chemical technology with one year experience.

Geologist

I am looking for vacancies in Kazakhstan. I am graduating from the Miami University, OH, US in December 2005 (with the Bachelor's Degree in International Studies and minor in Marketing Research); I will be able to start working right after graduation.

Recent Bachelors of Science Graduate with lots of motivation and desire to learn more!

Nearly Six years experience in IT Industries focusing on Computer Hardware, Software, Peripherals, & Networking solutions.

19 years combined work experience braisened to be an Assistant

I have travelled extensively through Europe and lived in Spain, Italy and Brazil. I am fluent in oral and written Italian, Spanish, Portuguese, and English.

ASWANATH'S RESUME FOR STOREKEEPER/WAREHOUSE JOBS

1 2 3 4 5 6 7 8 9 10 11 12 13 [ 14 ] 15

Seach Parameters


Change search parameters...
CATEGORIES: Other; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out