Resume - Repair and Maintenance, Product Quality Analyst, electrical fault analysis, acce...

Misco Jobs

Resume #78837

CONTACT INFORMATION:
View contact information...

Career Objective
To become a part of a growing and respectable company that has stability and advancement opportunities where I can expand my knowledge and skill sets.
Education
Associates of Applied Science GPA=3.85 out of 4.0 graduated from I.T.T. Technical Institute
Major in Electrical Engineering
CCNA Networking Associate Certification

Experience
2007 – current Texas Instruments Stafford, Texas
Repair and Maintenance Technician Prober and Tester support

* Isolate, troubleshoot and repair multiple tester platforms, which include Teradyne, Polaris, LTX Fusion, and various other customer test platforms.
* Run diagnostics and electrical fault isolation
* Board replacement
* Power Supply adjustment and replacements
* Support the test floor and maintain tool utilization at 98%.
* Interface with customers and engineers to provide increased quality and dependability on any all tester platforms.
* Maintain and order spare parts if needed.
* Troubleshoot PCB's to the component level and repair as needed to maintain tester utilization and reduce downtime.
* Access and usage of Unix and Linux operating systems.
* Extensive ISO 9000 training

Experience
2003 – 2007 Texas Instruments Stafford, Texas
Product Quality Analyst AEC Automotive Division

* Analyze Micro controllers. Through electrical fault isolation techniques.
* Support customer returns and improve quality through defect identification, defect reduction, defect electrical isolation, test case improvements and implementation. Drive customer returns to closure and identify root cause.
* Operation of Automated Testing Equipment: Platforms: Teradyne, Polaris, Fusion, and various other customer test platforms.
* Provide corrective action to reduce defects to improve quality and reliability.
* Provide formal status and final reports in the 8D format.
* Extensive ISO 9000 training

Experience
2000 – 2003 Texas Instruments Richardson, Texas

Plasma Test Laser Technician
* Operate Laser, VCT, VLCT and LTX Fusion series testers
* Operate under engineering conditions "Load specialty Job files etc"
* Interface with Engineering on Dispositions and minor issues with product flow
* Monitor and troubleshoot tester setups to maximize yield and minimize probe / re-probe cycle time and scrap
* Perform data analysis in performing lot disposition after processing
* Work closely with PDE and assist as I can in bin summary analysis, material scrap/dispositions and program anomalies
Experience
1999 – 2000 Texas Instruments Richardson, Texas
Wafer Fabrication Manufacture Specialist, (Photolytic)
* Work in a clean room environment
* Wafer handling protocols
* Operate photolithical equipment in production of silicon wafers utilizing precision optical equipment (electron microscopes, steppers using unix xterm interfaces and alignment machines
* Follow written and verbal procedures
* Interact with customers and suppliers within a team environment
* Troubleshoot exposure problems and make adjustments accordingly
* Identify hold lot issues; implement corrective action and direct rework as necessary

1987-1999 Texas Instruments/Raytheon McKinney, Texas

Electronic Engineer Technician AT/ET (Acceptance Test,
Environmental Test) Job grade 74
* Perform Qualification testing on deliverable/prototype products
* Provide formal documentation on testing results and events performed
* Trouble shoot malfunctioning systems and work closely with Engineering to correct issues, utilizing voltmeters, oscilloscopes and analytical software relevant to the particular system under test
* Interface with customers/suppliers within the organization
* Control work flow to meet customer demands and on time delivery
* Work with and write formal operating procedures and written operating instructions as needed in operation of systems to meet Military standards and customers needs
* Maintain and trouble shoot equipment used in the lab (Test sets, Chamber controllers, vibration controllers, circle chart recorders, meters, PC's, operating systems such as Windows NT and Unix/Solaris.
* Gather field data on systems, instrument them with accelerometers, operate them under field conditions while recording on a DAT machine, take the data and import it into a signal generator, and alter the signal as needed per customer requirements (increase or decrease DB/RMS levels) to be input through Electro Dynamic Shakers controlled by Ultra Spark workstations running on Solaris Unix and Spectral Dynamics Shaker controller software
* At times provide LAN connectivity so that the customer can interact with their units under test from home or from their workstations. Some test are very long durations, sometimes as long as 1 year (Reliability Growth and accelerated life Tests)
* Perform sound tests within a soundproof environment, recording DB levels under operational and non-operational conditions to meet customer requirements
* Provide testing recommendations to customers to meet Military standards

Special Skills
* Extensive electrical test data analysis. Able to interpret electrical functional data for electrical fault isolation.
* Power Supply functionality, adjustment, and replacement
* Good understanding of electrical circuitry and their functionality.
* Good understanding of semiconductors, their properties and fabrication methods and techniques.
* Certification of completion of Advanced Vibration Equipment Operation Administered by Environmental Test Laboratory of Texas Instruments
* Use testing and monitoring equipment as in voltmeters and oscilloscopes, signal generators (Spectral Dynamics software)
* Good written and communication skills
* Work well in a teaming environment
* Work with little or no supervision
* Control workflow to meet customer requirements
* Read drawings and schematics, follow and write formal procedures
* TQC certification (Total Quality Control)
* Basic Unix operating system usage
* Signal generation and wave form manipulation using Software made by Spectral Dynamics
* Troubleshooting skills, some component level and card to system level
* Operation of Teradyne, VCT, VLCT, LTX Fusion Probe testers
* SMS functionality
* Microsoft Word, Excel, some Access
* Operating Systems—Winnt 4.0 and up, WinME, Win2000, Win2000 server, Solaris, Linux, Unix

Honors
* Member of the Honor Society at I.T.T. Technical Institute
* Highest Honors awards

References
* Furnished upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 251 to 300 of 722)

Go to Search Parameters...

Brief Description

Technical/General English Instructor. Certified. BA and MA. Employed in field since 1988. Overseas experience in Middle East and Far East including oil and gas industry.

Principal Environmental & Safety Consultant, oil, gas, mining & major projects; EIA, EMS, Environmental risk etc, climate change, HAZOP, HAZID, Safety managment etc experience. Relocating to Vancouver. Has right to live and work in Canada

Over twenty years of experience

Procurement & Supply Chain Management

Seeking Chemist, Laboratory, or Quality Control Position

Worked in an oil and gas industry and undergone an intensive training .

Seeking International, full-time position in Central, South America with a mining company for the development and management of capital projects. Peruvian Residency Available, Spanish, Project Management and Construction Experience with Heap Leach and Tailings Facilities

Sr.Document Controller

PE in Mining, Environmental & Civil Engineering with 26+ years experience in surface coal mining management, engineering & environmental. I've held positions up to and including Vice-President of Operations. Well experienced in open pit dragline & truck/shovel operations. Well organized.

Seeking employment in mining Industry/Consultency as Mine Planning /Scheduling Engineer. Key Skills: Exposure to mechanised Underground and Opencast mining technologies. Experience in Computerised Mine Planning and Geological modelling using Minex software and Autodesk

Managing, organising and participating in geological field studies, drilling and geological testing programAnalysing geological, geochemical and geophysical survey data, well logs and other test results, maps, notes and cross sections, core samples, drill cuttings and rock samples

I am a safe and productive Miner with ten years of increasing experience

Quailty Coordinator, Welding Specialist, Safety Training Coordinator, Operations Coordinator Prefer Former CIS Russia, Kazakhstan

Corporate Executive in Information Technology with extensive international experience in Systems/Product Architecture (Analysis & Design), Program/Project Management, Business Continuity Disaster/Recovery Planning, Technical Service Delivery & Support, Technical/Operations Management

Contract data analyst specializing in data extraction, conversion and reporting for over seven years.

Occupational Health Safety & Environmental Practitioner, Post Gruate Cert. in OHS&E Management

Seasoned Professional with 14 Plus years varied experience in the Geology Field. Relocation possible.

Geologist mining, environmental company

Powerbuilder, Sybase, Oracle, Informatica, UNIX Shell Script & Perl technical skills as Analyst Programmer.

Project Management / Inspection / Procurement / Quality Assurance

Authomotive technology major in hydraulic machineries and heavy equiptment

Implementing saftey policy& progrramme, supervising the procurement&, PPE, inspection to locate unsafe practiceor unsafe condition, saftey audit, recomends of propper house keeping, to give tool box talk to the worker

National coordinator of Biokinetics at ESKOM (Electricity Supply Commision of South Africa). I hold a DPhil degree in Biokinetics, specializing in Work Simulation assessment and taks-specific job accommodation. I`ve been national coordinator for 4 years and I coordinate several other health projects

Technical Summary: More than twelve years of High-Tech manufacturing procurement under Department of Defense Contracts in compliance with C.C.A.S., FAR / DFAR Regulations and I.T.A.R.

Young, hard worker, looking for a career in the mining industry.

Would like to obtain a full time or contract position within the WA mining idustry, in the capacity of Trades Assistant or Labourer.

Proven security team manager, with international experience, specializing in the protection of high profile targets in medium and high threat environments.

I have 18 years experience in the oil field on drill rigs also have 10 years experience as caterpillar mechanic I have computer, construction,electrical,plumbing skills and I am very safety minded

N Dip information technlogy/cert in computer engeneering

A land and property manager with expertise in contaminated property and community relations. Specializing in aligning community and corporate interests into a workable plan, improving communications and building stakeholder trust.

Progressively Responsible of a range of Purchasing/Warehousing Management, Organization & Administration positions with worldwide procurement (national & international); Contribution and Direct Involvement in all previous jobs with regards to purchasing of spare parts and materials required for all

Experienced Design Engineer

An experienced security professional with 24 years of strong corporate security and law enforcement qualifications who has demonstrated a high level of success in a variety of significant and highly critical assignments in a fast paced environment. Also has an impressive track record of hands-on exp

Buyer/Planner Skilled in Inventory Management, Cost Reduction, Sourcing and Negotiation

Repair and Maintenance, Product Quality Analyst, electrical fault analysis, acceptance testing, interpret drawings and schematics, advanced vibration, reliability growth testing, precise measuring equipment, tester platforms (Teradyne, Polaris, Fusion), power supply adjustment and replacement

Software Developer .NET, Java SQL

Safety Officer QualifiedUK HSE & HSE Trainer

Contracts Manager

Technical

A results-oriented Analyst combining hands on management consulting, project finance, market analysis and mining operations experience, I provide actionable advice for the key business decisions that enhance competitive positioning.

Recruiter with more than 3 yrs exp iN Recruitment, JD Preparation, Sourcing, Shortlisting, Offer, Visa Processing

Procurement, Materials and Logistics Manager (SCM): 20 years international experience in gas & oil and energy projects.

Zinc and Lead Smelter Plants Metallurgical Engineer with experince in operations, consultancy & Project Execution & Management

Previous warehouse work..good hard worker ,fast learner

Security Manager

Multi lingual professional with MBA in Supply Chain Logistics. A proven effective communicator and negotiator with extensive experience in field operations supporting military, humanitarian and commercial operations.

A dynamic professional with over 18 years of rich experience in Procurement, Vendor Development and Inventory Control.

Project Controls Cost Engineer / Analyst (EVMS, Change Management, Cost Forecasting Planning and Budgeting)

Highlight: Thirty-Six Years Continued Experience in the petro-chemical, power generation, mining and commercial industrial sectors, working with several major companies at various levels of responsibility in the procurement/supply/distribution/and management of materials.

To obtain a challenging position that utilizes proven experience and skills.

1 2 3 4 5 [ 6 ] 7 8 9 10 11 12 13 14 15

Seach Parameters


Change search parameters...
CATEGORIES: Other; INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out