Resume - Hard working Mining Engineer with 10 years experience in underground mine develo...

Misco Jobs

Resume #11423

CONTACT INFORMATION:
View contact information...

POSITION APPLIED FOR:
Mining Engineer

OBJECTIVE:
To be able to work for a reputable company and obtain a challenging position where I will be able to apply my experience for the service as a whole, for the benefits of its clientele and as a professional individual.

WORK EXPERIENCE:
Jun. 2000–Present Mines and Geosciences Bureau Manila, Phils.
Engineer II
Mining Environment and Safety Division
- Conducts regular monitoring of operating mines (underground and open cast) and quarries on proper mining methods, safety and health.
- Conducts regular monitoring of operating mines (underground and open cast) and quarries against adverse effects of mining activities on the environment. Recommends measures to protect the environment against the adverse effect of mining operation.
- Conducts lectures/seminars, information and education campaign (IEC) to concerned mining communities regarding the pertinent provisions of the Philippine Mining Act of 1995 and its Revised Implementing Rules and Regulations.
- Conducts field investigation on illegal mining activities and mining conflicts.
- Conducts periodic monitoring of areas covered by existing mining rights and exploration permits.
- Performs other special duties and responsibilities within the authority of the Mines and Geo-Sciences Bureau that may be delegated from time to time as the need arises.
- Prepares call up letters/correspondences in relation to the abovementioned activities.

Dec. 1997-Jun. 2000 Paramina Earth Technologies Inc. Makati, Phils.
Project Foreman
Underground Mine Development and Production
Philex Mining Corp. Project
Benguet, Phils.
- Implements instructions from the Project Manager and/or from the turn-over reports of outgoing mine foreman and shift bosses inquiring available equipment priorities, manning and other information to assure optimum performance.
- Check excavation headings for ground instability. Instruct and directs personnel to completely scale down loose debris and supervises the proper and effective installation of rock support, if necessary.
- Organizes, assigns and directs personnel in posting of guards on all approaches affected by blasting and inform other personnel working on adjacent areas to secure safe position during blasting.
- Ensures all equipment are retreated to safe distances before blasting to prevent any damage that might result from it.
- Inspects newly blasted face for bootlegs and misfires. Supervises the proper recovery of misfires and cleaning of face if any, to assure it is free from remnants of explosives.
- Make certain the proper and maximum utilization of development and production LHD's. Reports and make request for emergency equipment maintenance and repair when necessary.
- Prepares turn-over report for incoming shift and log all accomplishments during the shift into the provided logbook.
- Makes request for necessary materials and supplies to accomplish the task and follow-up delivery of the same.
- Enforce and ensure that all subordinates assigned to task follow established safety regulations and practices and that they use and protect themselves with personal protective equipment.
- Responsible for maintaining safe working conditions and for installing safe working habits on subordinates. Conducts safety pep talks during start of the shift and monthly safety meetings.
- Ensures proper orientation and training of new employees and develop their skills in accordance with the company policies and procedures.
- Takes corrective action when a work standard is violated and reports serious infractions to superiors. Makes recommendation concerning appropriate disciplinary action. Makes accident report, if any.
- Perform other duties that maybe assigned from time to time.

Apr. 1996–Dec. 1997 Paramina Earth Technologies Inc. Makati, Phils.
Project Safety Engineer
Underground Mine Development and Production
Philex Mining Corp. and Lepanto Consolidated Mining Co. Projects
Benguet, Phils.
- Formulate and submit Annual Safety Program to the Mines and Geosciences Bureau.
- Acts in an advisory capacity as the Safety Program Coordinator to ensure that all directives in the program will be followed religiously in order to have a smooth, efficient and conducive working environment in all projects.
- Responsible for the necessary training, skills assessment, documentation and record keeping to ensure that the registered legal responsibilities are met under Mines Safety Rules and Regulations.
- Collates and review monthly reports submitted by the Project Managers.
- Conducts regular safety inspections and submits report to the concerned Project Managers/Head Office for appropriate actions on safety recommendations.
- Coordinate safety activities and actively participate during local and national safety council meetings and conferences.
- Investigate and analyzes accident/s and recommend action plans to prevent recurrence.
- Maintains up to date safety and accident statistics.
- Submit Monthly General Accident Report to the Mines and Geosciences Bureau.
- Formulate emergency response preparedness program.
- Provides assistance to government agencies in the conduct of safety and health inspection, accident investigation or any other related programs.
- Perform other duties that maybe assigned from time to time.

Oct. 1995–Apr. 1996 Paramina Earth Technologies Inc. Makati, Phils.
Planning Engineer
Engineering Department
- Responsible for the preparation of cost estimates and contract proposals to prospective clients.
- Conducts time and motion studies of various activities in all operations to evaluate existing work systems, including but not limited to formulation of standard in drilling and blasting rounds, mucking and development of heading advances.
- Evaluates and recommends work improvement system to enhance productivity.
- Consistently monitor the actual project operational costs and prepares appropriate estimates leading to claim for contract rate adjustments.
- Collates all project accomplishments reports submitted to the Head Office and make billing reports to clients accordingly.
- Perform other duties that maybe assigned from time to time.

Mar. 1994–Apr. 1994 Marcopper Mining Corp. Marinduque, Phils.
Mine Trainee
- Familiarization with the geology, mining method and milling operation (open pit mining method).

1986–1994 Family Business Laguna, Phils.
Woodcarver
- Part-time job as woodcarver of religious icons.

TRAININGS/SEMINARS ATTENDED:
1. Training on Safety and Emergency Response for DENR Brigades, March 29 to April 1, 2004, Department of Environment and Natural Resources – Region-4 (DENR-4)
2. 4th International Environmentally Friendly Mining, Minerals, Energy and Allied Industries Exhibition and Conference "Towards a Revitalized Minerals and Allied Industries", February 19 to 20, 2004, Chamber of Mines of the Philippines
3. Safety and Health Environment Training, January 30 to 31, 2002, Mines and Geosciences Bureau – Region-IV (MGB-4)/Provincial Mining Regulatory Board-Laguna/Association of Quarry Operators of Laguna
4. 9th Seminar on Environmental Management in Mining, January 24 to 25, 2002 Japan International Cooperation Agency (JICA)-Department of Environment and Natural Resources (DENR)/Mines and Geosciences Bureau (MGB)
5. 46th Annual National Mine Safety and Environment Conference, November 26, 1999, Philippine Mine Safety and Environment Association (PMSEA) and Philippine Society of Mining Engineers (PSEM)
6. Fan Performance and Tunnel Applications, October 1, 1998, Matthews & Yates (UK)
7. EJC 100 Operation and Maintenance Training, September 10, 1998, Tamrock Philippines
8. Environmental Success in Philippine Mining, June 25, 1998, Chamber of Mines of the Philippines
9. 44th Annual National Mine Safety and Accident Prevention Conference, November 27, 1997, Philippine Mine Safety and Environment Association (PMSEA) and Philippine Society of Mining Engineers (PSEM)
10. Dam Engineering Technology, June 4 to 6, 1995, Energosystem & Geosciences, Inc.
11. Power Train Efficiency Mechanical Drive vs. Electrical Drive; Do Biological Connections Exist Between Seagrass and Mangrove Ecosystem: A Case Study in the Philippines; and Pumps for Coarse Solids Applications, April 22, 1994, PIMMGE Marinduque Chapter
12. Safe and Efficient Blasting, January 26, 1994, Philippine Explosives Corp/Orica Explosives

EDUCATION:
1990–1995 Mapua Institute of Technology Manila, Phils.
- Bachelor of Science in Mining Engineering

Examination Taken:
August 1995 Professional Regulation Commission Manila, Phils.
- Licensure Examination for Mining Engineers, Board Topnotcher. License Mining Engineer, registration no. 2553.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1251 to 1300 of 3490)

Go to Search Parameters...

Brief Description

Hard working Mining Engineer with 10 years experience in underground mine development, mine prodution and monitoring including safety, health and environment aspect of underground and open cast mining operation.

Mechanical fitter, Snr SHE Officer & Mining Eng 2nd year Honours Degree at Leeds University

Objective I am looking for an environment that provides a challenge and growth opportunities. My ideal company would utilize my 15 years of experience in all aspects of the mining industry.

Over 16 years of total experience in the industry of which 8 year’s industrial experience as Chemical Engineer. This is backed by 8 years of experience of implementation of Intergraph’s Plant Design System (PDS) software. The domain of PDS expertise comprises of piping and structural modeling, extra

With a proven record of exemplary senior management, and delivering efficient and productive operations strategies within corporate environments, I am seeking to utilize my comprehensive experience with an innovative and high growth company.

Drilling specialist and Mech. diesel fitter

Experienced Civil / Structural Engineer

CNC programming, unigraphics NX4/5, Catia V5, Autocad

MAINTENENCES MANAGEMENT OF HEAVY EARTH MOVING AND CONSTRUTION EQUIPMENT

I do not have any experience. I want to make mining my career. I am very hard working, and want to mine until I retire. The only relative experience that I have is construction. I worked construction in Las Vegas for one summer.

I have extensive mining and heavy equipment operator experience and training.

3D Modeling, FEA, ANSYS, GTSTRUDL, STAAD, RAM, RISA, CAESAR II. USA, British, Euro, China, Russia Codes and Industries Standards.

Equipment Operator

HSEC Training Coordinator, SHE Coordinator, Heavy plant Mechanic and Mechanical Engineer as back ground.

I graduated in May 2008 from Virginia Tech with a Bachelors degree in Mining Engineering. I have excellent computer skills and have experience working with many software programs including Vulcan, AutoCad, SurvCADD, and Microsoft Office.

Field geologist with background in ArcGIS and Gemcom's Surpac, proficient computer user and excellent communicator.

Trade Qualification in Heavy Plant Mechanic. Knowledge of CAT and Komatsu machoines.

Seeking a position where I will be able to use my knowledge and talents to meet my employer's expectation.

Field Engineer, Instrument Specialist, Instrument Technician, Instrumentation and Controls, DCS, PLCs, Turbine Controls, Power Plants, Pipelines, Refinaries, Steel Mills

Experienced Mining engineer in large scale openpit Mines with knowledge of SAP and Materials Management and controlled blasting

Highly skilled carpenter 17 years experience. Related work includes structural steel erection, connecting and rigging. Poured concrete, scaffold set up and tear down, foreman for residential housing from framing to finish carpentry.

40 years of underground mining experinece in all phases of mine development. I've supervised crews of 20 or more miners and operators, and have experience in the operation of underground haulage equipment, shaft sinking equipment and drilling/blasting equipment such as jumbos and jacklegs

Irish Australian coal mining operator, excavator upto 400 tonne, haul truck , water cart etc.

Bachelors degree in Chemical Engineering with Minerals Engineering, 4 years experience with a global mineral processing company.

I am formerly a Sr. Maintenance Engineer responsible for the Maintenance and Project implementation of several Petro Chemical Plants. My responsibilities included supervising anywhere fro 10 to 200 mechanics at any on time. I was also resposible for budget up to 7million US.

CAWI - AWS (MIAMI); Qualifications NDT - SNT-TC-1A :Level II : RT and PT

Ten years of production experience, maintenance, quality control, and provisory experience in cement production and management experience in lime production and quarry operations. Directly worked with maintenance repair for the plant. Degree Geologist

Control and instrumentation engineer with good experience in project management ,construction, commissioning in power plants and chemical industries.

License and experience geologist in the fields of mining and urban geology

Mining Engineer with 6 year 0f experience in mining industry

Engineering & Engineering Project Management

Instrument Technician/Electrician OR Instrument /Electrical/Electronics Engineer

Qualified dump truck operator for CAT 777 and Komatsu 785

Electrician

Project manager

Information Technology Vicepresident / Manager / Director / Project Manager

Journeyman Machinist 30 yrs.experience mechanical maintenance in oil and gas industries, mining, pulp and paper

SENIOR PROFESSIONAL MINERAL EXPLORATION GEOLOGIST/MANAGER with 26 years Global Experience. Gold Specialty but experienced in Base Metals and Diamond. Practicing Independent Qualified Person (QP) for Canadian Securities Reporting and Resource Estimations. MapInfo/Discover GIS User.

Mining Engineer with 30 years experience in metal/precious stones/alluvial deposits seeking managerial or consultant position with new or established mining projects

In Geotechnics I ensured the supervision, the control and the establishment of design reports for several geotechnical investigations of large civil structures in soft and hard grounds : special foundations, retaining structures, soil improvement and reinforcement by geosynthetics' products,

Geologist and expert of GIS/Remote Sensing and Digital Image Processing

Blast Hole Driller

Hello! Please consider my resume for your mining needs. Thanks for taking the time to look at it.

Construction Civil Superintendent (Earthworks, Infrastructure and Concrete)

I am a well-rounded mining engineer from the Colorado School of Mines (CSM) with 18 years experience, looking for an opportunity to help a surface mining company meet its goals.

20 years of project management, EPCM international experience in Oil & Gas. On shore, chemical, petro chemical, LNG, power plants, offshore platforms, from inception of project through design to built up & close out. Cost estimation of global tenders of capital projects,.

I'm an Electrical Engineer and since 2005, i occupy the post of Maintenance Engineer (Electricity, instrumebntation and mechanic) in a mining industrie.

Senior Security Supervisor/Manager

Free! Bosun experience -aboard an ammunitions ship ,underway replenishment tanker in support of the Irag war - 2002 2003. Navy Bosun’s Mate - refrigerated stores ship - fleet oiler 4 years.

4 years experience as mechanical engineer; 5 years experience as a C/C++-programmer;2 years experience as an electronic engineer

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 [ 26 ] 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out