Resume - Metallurgical Engineer, Project Engineer, Operations Manager, Primary metals, pe...

Misco Jobs

Resume #15567

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS
Production Manager
Process Engineer
Project Engineer
Metallurgist
Professional Engineer registered in Alberta, Canada ~ 708-426-3990

EDUCATION
Natural Gas Processing (Grad Chemical Eng. Course), University of Calgary, Calgary, AB, Canada
MBA Course Work, Laurentian University, Sudbury, ON, Canada
Bachelor of Engineering (Metallurgical), McMaster University, Hamilton, ON, Canada

EMPLOYMENT HISTORY

AMERICAN STEEL FOUNDRIES-KEYSTONE 2004 – Present
1700 Walnut Street, Granite City, Illinois, 62040, 618-452-2111
Quality Control Engineer
- Directed Operations in reducing scrap rate.
- Analyzed scrap defects to determine cause and solution.

BIG RIVER ZINC COMPANY 2003-2004
2401 Mississippi Ave, Sauget, Illinois 62201 618-274-5000
Production Supervisor (Temporary under Contract)
- Responsible for operations, safety and shift management of the electrolysis department. Managed around 20 unionized employees on the 2nd and 3rd Shift.
- Solved production problems.

THE DOE RUN COMPANY 1999 - 2003
HC 1 Box 1359, Boss, Missouri 65440 573-626-4813
Smelter Metallurgist (Lead-Acid Battery Recycling Division, Boss, MO), 2001-2003
- Technical assistant for operation of blast furnace, reverberatory furnace, refinery, battery desulfurization unit, and wastewater treatment plant.
- ISO 9001-2000 Certified Internal Auditor.
Hydrometallurgist (Mining and Milling Division, Viburnum, MO), 1999-2001
- Technical consultant to international smelters for the Engitec Flubor Process.
- Solved leaching and electrolysis problems during start up and operation of pilot plant. The pilot plant proved the technical and economical viability of the Engitec "Flubor ® Process". The process is the world's first electrowinning lead process.

ASARCO (Encycle) 1995 - 1999
5500 Up River Road, Corpus Christi, Texas 78407 361-289-0300
Facility Manager
- Operations Manager for 3 departments (half of the plant) of a unionized plant.
- Started up a new operational department: revised the process for greater safety; authored the operating instructions; initiated process improvements.
- Achieved higher sustained production by initiating process improvements. The feeds were highly variable, corrosive, caustic, pyrrophoric.

ZINC CORPORATION OF AMERICA 1989 - 1995
Bartlesville, Oklahoma

Technical Manager
- Retained by senior management during temporary and permanent plant closure. Was a key employee for re-opening the plant under the electrolytic zinc or other novel metallurgical process. Produced feasibility and environmental studies. Operated the chemical laboratory.
- Conference presentations to Canadian and American Zinc Producers Association.
Superintendent of Hydrometallurgy
- Reversed profit-losing situation by solving problems in process chemistry, long-term maintenance, and supervisory and union personnel issues.
- Set several production records for zinc and cadmium tonnage.
- Managed an 80-employee operations department.
Process Engineer
- Technical representative for ZCA. Evaluated Mitsui zinc powder manufacturing technology used in alkaline batteries. The evaluation resulted in a new, jointly owned ZCA-Mitsui plant built in USA in 1996.

NATIONAL LINEN 1986 - 1989
Fort Myers, Florida
Operations Supervisor
As first line supervisor managed 15 + people in this industrial laundry.

SELF-EMPLOYED CONTRACTOR 1984 - 1986
Red Deer, AB, Canada
Contractor

NOVA CHEMICALS CORPORATION 1980 - 1984
Joffre, Alberta
Project Engineer
- Coordinated the design and installation of a compressor station and Waste Water Treatment effluent diffuser.
- Novacor's representative for the architectural/engineering design of the head office.
- Audited the plant's mechanical integrity to prevent a vapor cloud release.

NORANDA-FALCONBRIDGE-TEXASGULF 1975 - 1980
Timmins, Ontario, P4N, Canada
Development Engineer
- Co-invented the Zinc Arsenate Process, (still in use after 25 years)
- Designed and commissioned the plant.

ATLAS STEELS 1974 - 1975
Welland Ontario, Canada
Metallurgist
- Physical metallurgist in the rod mill.

LICENSES AND TRAINING
- ISO 9001 – 2000 Certified Internal Auditor
- Recently I have undergone a US government background check as my son is completing his Top Security Clearance for the US Air Force
- Computer skills: Excel, Word, and PowerPoint
- HAZMAT 40 hour training, with current annual HAZWOPER training
- Operated: AA & DR Spectro-photometer, wet chemistry, Low Alpha Radiation Detector
- Fluent in Polish. Understand some Russian and French.

PATENTS
Co-Invented the process: The Recovery of Arsenic as Zinc Arsenate and its Utilization in the Purification of Zinc Plant Electrolytes. U.S. Patent 4,240,826

Through my research contributions the Doe Run Company obtained a larger ownership of the patent rights to the Engitec Flubor ® Process.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1551 to 1600 of 3493)

Go to Search Parameters...

Brief Description

Successful quarrying operations manager, team player and profit oriented, Hands on leader of quarrying operations. Turning vision into profit. Operating at strategic board level and tactical field problem solving, setting and achieving goals.

Experience field mapping (geologic and structural maps) in Alabama, Idaho, and Nevada. One year experience correlating well logs using Landmark Geographix. Working knowledge of other programs includes AutoCAD, ArcView GIS, Rockworks, CorelDRAW and Corel PhotoPaint, Excel, PowerPoint, and Word.

I am B.Tech in mining and I have total experience of more than 6 years 6 months in mine operations, mine planning, operation of benefication, wet and dry screening plants in large mechanized opencast iron ore mines,

EXPERIENCE 1999–present Holt McDermott Mine, Barrick Gold, Kirkland Lake, ON Mine Engineer 1997–1998 Williams Operating Corp. Marathon, ON Underground Miner EDUCATION 1995–1999 Queen’s University Kingston, ON Bachelor of Science in Mining Engineering

Education: BEng (Hon): Mining Engineering (2001 Adelaide, Australia). GPA 5.8 (out of 7) BEng: Mechanical Engineering (1992 Moscow, Russia). GPA 6.3 (out of 7) Employment: 1992-1997 Mechanical Engineer. Moscow Bauman State Technical University, Russia.

Excel economic/financial modeling, project/company valuation, financial statements, budgets and planning, economics, credit analysis

I have many years experience in the open pit mining sector in several African countries working with several commodities. Starting as a shift foreman, I reached a level of Mine Services Manager based on my extensive experience with load and haul, drill and blast, dewatering and auxilliary works.

Senior Grade Control Coordinator--Specialist in Managing Remote Field Exploration, Resource Development and Grade Control for Mining Operations

I am likely to be something of a perfectionist and will sacrifice pleasure ells where in order to accomplice my work to a set standard, I am determined and have high standards set my work. Combined with my positive no-nonsense style of work I always get positive results from my work. I can work unsu

Mining Geologist

Trade Qualified Boilermaker with over 15 years experience

Highly skilled graduate Project Manager/Civil Engineer and Project Controls Lead with more than 25 years related domestic and international experience in project and construction management.

Skilled in trouble shooting and maintenance of various types of equipment Cleaned, lubricated and performed routine maintenance work on machinery Performed safety checks on various types of equipment Repaired stationary industrial machinery and mechanical equipment

Supervising for coal exploration include mapping, regional, drilling in the coal mining, I supersived over coal quality control, include sampling in pit, ROM and shipment include blending program. in Gold Mining, I supervised for regional and detail exploration include mapping, and drilling

I have 30+years in the heavy equipment field service. I work on all parts of any machine diesel or gas that is construction or mining related. Don't let the years fool you. I can work circles around the younger guys and teach them more than they have ever learned.

Qualified diesel mechanic with 12 years experience in a commercial and mining environment and 3 years Maintenance supervisor experience.

Experience in Metrology and Quality Assurance, Instrumentation and Process Control. MSc. In Applied Physics - University of Zimbabwe

Industrial Electrical, Instrumentation, Power Generation Systems, PLC and Scada design and programming, Construction and Maint.

•Over 9 years experience preparing detailed estimates for Capital Projects involving all engineering disciplines including process design, civil, structural, mechanical, piping, electrical, instrumentation, and process control for Mining and Heavy industrial Projects.

Sr. Piping Design, Lead Des, ACAD 3D, Microstation 3D

Estimating

Land surveyor, Road, Stormwater, Sewer, Subdivision designer

Metallurgical Engineer

back hoe ,skiddre, harvester, porter, off road trucks cat 769,773,777

Career Objective: To contribute to the growth of mining industry in a position where I will have opportunities to utilize my interpersonal and professional skills to apply my knowledge and experience in mining technology.

Accomplished technical and managerial career qualified by 24 years of measurable achievements in the construction and mining industries. Highly skilled in identifying, evaluating and negotiating joint venture and other international business opportunities with government officials, the private sect

Metallurgical Engineer, Project Engineer, Operations Manager, Primary metals, petrochemicals.

Diamond and gold mining, Diamond and Gold producer, Diamond and Gold Purchaser

management of R&D programmes, technology strategy, consulting and evaluation

Project Engineer - Proposal

Petroleum Engineer

Am a male compentant Auto-LHD Electrician with 5years working exposure in different machine and vehicle

I am an experienced mining engineer in the field of coal as well as stone mine.

Certified in Heavy Equipment Operating, AZ, Hard Rock Mining Certified, Welder Cert.

Project engineering/managment

A solid operations/manufacturing/sales/marketing/quality control/administration background within large and small firms with responsibility to orchestrate numerous M&A and turnarounds of trouble companies and divisions. A complimentary proven risk management background within Middle Office and Tra

Joint Venture Accountant for four oil and gas companies

drilling on a atlas l8

Degree in Mining Engineering with MBA having 7 years experience in financial, commercial, operations and improvement related activities in mining sector.

Several Years experience as drafter, on board last 15 on AutoCAD

Exploration Geologist. Worked in China and Australia on Gold and Tantalum projects respectivly.

Managing Mine Resources, Maintenance Planning, Mine Start-Up,

Electrical Project/Construction Management

I have completed diploma in mechanical engg with first class and also have 8yrs exp in the field of engineering and manufacturing

25+ years experience as Operations Manager in the Resources and Oil & Gas Sectors. Formal qualifications in Engineering and Business.

A competent leader with 3 years of experience within HSE Management in the upstream and downstream Oil & Gas Industry

Mining degree, 6 years hard rock track and trackless mining experience, planning

20+ years in Control Systems Engineering/Design. Experienced Intools user.

Metallurgist and Materials engineer with 3 years of experience. Wide range of skills in metallography techniques, SEM, TEM, Stastical tools and design softwares. Good communication and presentation skills. Published papers in journals and presented work at conferences.

Free ! YOUNG POTENTIAL in FINANCE & ADMINISTRATION

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 [ 32 ] 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out