Resume - Drilling professional for 20+ years; extensive international well construction s...

Misco Jobs

Resume #18240

CONTACT INFORMATION:
View contact information...

Experienced drilling engineer / manager with a record of success in the design and construction of complex wells.

Managed the construction of China's first horizontal, underbalanced, multilateral coal bed methane well. Successfully completed on time, within budget and with no LTA's.

An analytical and independent creative thinker with a record of providing innovative solutions from concept to completion.

Multi-skilled with technical, commercial and leadership experience in a diverse range of international locations.

CAREER DETAILS:
2004-Date: DRILLING PROJECT MANAGER: Asian American Coal Inc., China
* Design of horizontal multilateral underbalanced geosteered coal bed methane well:
-Evaluation of well functional requirements
-Analysis of offset vertical well data
-Identification of risks, hazards and preparation of contingencies
-Preparation of well plans, detailed procedures and time estimates
-Evaluation of hydraulics, torque/drag, casing requirements
-Specification and procurement of drilling and completion equipment
-Preparation of AFE
-Evaluation of proposals, negotiations with service providers, preparation of contracts

* On-site well construction supervision and management of multi-disciplinary team:
-Drilling
-Underbalance
-Geology
-Completion
-Production
-Contracts / Budget
-Materials / Logistics
-Local Liaison / Regulations
-Data Management and reporting

Responsible for team organisation, reporting structure, definition of roles and responsibilities, allocation of tasks.
Constant evaluation and analysis of drilling operations in order to achieve continuous improvement.
Supervision and monitoring of the performance of employees and contractors (drilling contractor, horizontal directional drillers, geosteering, special tools for shallow extended reach drilling).

* Special responsibility for on-site HSE management:
-HSE Pre-spud rig inspection; supervision of required remedial action
-Emergency response planning
-Introduction and coordination of Job Safety Analysis system
-Introduction and coordination of Hazard Observation System
-Preparation of Safety Awareness Posters
-Safety Meetings
-Specification of special safety regulations for underbalanced drilling
-Preparation of HSE daily report

*Post-well technical and commercial management:
-Supervision and preparation of operations reports
-Technical operations review; capture lessons learned
-Service Contractors payment negotiations

1998-2004: REGIONAL MULTILATERAL DRILLING MANAGER: Halliburton, Asia Pacific
* Technical and commercial management of multilateral well construction services
* Complex well planning
* Risk assessment and contingency planning
* Timing estimates
* Ordering, mobilisation, assembly and testing of equipment
* Member of multidisciplinary well construction teams
* Operations supervision; HSE compliance
* Performance appraisals, goal setting for personnel
* Development of business plans & strategies
* Analysis of market, identification of new markets & opportunities
* Presentations to customers and colleagues
* Preparation of proposals, tenders
* Monitoring of service quality including KPI reporting and analysis
* Supervision of business development personnel
* Selection and organisation of personnel for MLT training
* Implemented innovative solutions for projects in Malaysia, China, Indonesia

1997-1998: MULTILATERAL DRILLING MANAGER: Sperry-Sun, Canada & Global
* Managed and mentored a team of 3 MLT engineers
* Co-ordinated project in Colombia
* Preparation, presentation of training schools, equipment demonstrations
* Analysis of operational problems, implementation of remedies

1996-1997: MULTILATERAL DRILLING ENGINEER: Sperry-Sun, Canada & Global
* Responsible for planning and deployment of MLT globally including Norway, UK, Canada, Venezuela
* Support for projects in the Middle East
* Design and testing of new ML technology
* Drilled well to test new short radius and CT equipment
* Drilled well to test new ML technologies
* Disseminate best practices; write procedures and technical manuals

1993-1996: DRILLING ENGINEER: Sperry-Sun, Europe
* Drilling engineering support for directional operations: BHA analysis, recommendations; hydraulics analysis; directional planning; failure analysis of downhole tools
* MLT Co-ordinator on Europe's first multilateral well
* Temporary Directional Drilling Co-ordinator for NAM offshore team

1991-1993: ADT UNIT MANAGER, Sperry-Sun, Norway
1990-1991: SENIOR ADT, Sperry-Sun, Nigeria
1987-1990: SENIOR ADT, Sperry-Sun, North Sea
1985-1987: APPLIED DRILLING TECHNOLOGY ENGINEER, Sperry-Sun, North Sea
1984-1985: SDL ENGINEER, Sperry-Sun, North Sea
1981-1982: SURFACE DATA LOGGING (SDL) ENGINEER, Nigeria
* Monitoring and analysis of drilling operation to ensure efficiency and safety
* Constant monitoring, analysis and detection of pore pressures and fracture pressures
* Kick prevention /detection and well kill procedures
* Surface data logging and analysis
* Recommendations for optimising drilling performance
* High pressure, high temperature experience
* Shallow gas, sour gas experience
* Semi-submersible, jack-up and land rigs: North Sea, West Africa, Arabian Gulf

QUALIFICATIONS & EDUCATIONAL COURSES:

* B.Eng in Mechanical Engineering – University of Liverpool, UK
* 4 'A' levels & 9 'O' level qualifications

Training Courses:
* Business Acquisition Training (Malaysia, 2002)
* Effective Negotiating (Malaysia 2001)
* Presentation and Communication Workshop (Canada 1998)
* Well Completions, Intermediate Level (Canada, 1997)
* Directional Drilling update (Canada, 1997)
* AutoCAD LT (Canada, 1997)
* Multilateral Technology (Canada, 1996)
* Drilling Engineering (Houston, 1993)
* Drilling Fluids Technology (Houston, 1993)
* Mud Motor Mechanic (Aberdeen, 1993)
* Directional Drilling (Aberdeen, 1989)
* Applied Drilling Technology (London, 1985)
* Directional Surveying (Great Yarmouth, 1985)

ADDITIONAL INFORMATION:

* Born 3rd August 1960, Married, British
* Language skills include basic French, German, and Dutch
* Member of The Society of Petroleum Engineers since 1995
* Author of 10 published papers/articles
* Proficient in Windows and MS Office software.
* Proficient in directional well planning and drilling engineering programs, including directional BHA analysis, torque and drag analysis, hydraulics.
* Fully familiar with on and offshore drilling operations and equipment

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2051 to 2100 of 3130)

Go to Search Parameters...

Brief Description

PLM Degreed Registered Landman with more than 9 years of land related experience & 12 years in the oil industry. MBA degree. AsTeam Leader, supervise landmen of varying levels of experience. Duties include full title abstracting, curative, lease acquisition, due deligence, etc.

Having served in the british police force and military together with over 20 years in the public sector in close protection and management i feel i have the necessary skills required to fulfil any job in my field.

Technical

A self-directed, high organized individual who is able to easily identify and achieve priorities. Significant broad based experience in the areas of facilities planning, production, engineering, maintenance, environmental, staffing, and safety. Excellent communication and technical report writing

Experienced, safe & confident driver.

I have experience with SCADA system using Citect and RSView (Allen Bradley) as Man Machine Interface (MMI) and control system such as Allen Bradley PLC5, SLC500, ControlLogix, SimaticS5 and SimaticS7.

A results-oriented Analyst combining hands on management consulting, project finance, market analysis and mining operations experience, I provide actionable advice for the key business decisions that enhance competitive positioning.

Looking for Heavy Industrial Fitter/Mechanic type role - me with 5years experience - worked on Caterpillar, Komatsu, Hitachi, O.K etc. I am seeking employment in QLD, NSW or oversea, available to start at the end of this week and willing to relocate worldwide. Committed, reliable, and ready to go.

Currently employed as the primary Electrical Engineer. Engaged with improving safety, training, documentation, and implemeting preventive maintenance goals.

HR/Recruiter/Trainer

Monitoring POR’s (Purchase Order Request) for payment with the vendors and double check it if the documents needed are properly attached before payment is made.

MBA & Licensed to Practice Attorney seeking Government Affairs Position

Looking for management position in mineral (gold and precious metals) exploration and environmental engineering consulting.

Previous warehouse work..good hard worker ,fast learner

Versatile Procurement, Subcontracts & Facilities Manager with over 20 years experience in multi-contract project environments and with extensive international experience of major EPC projects within the power and oil & gas industries.

i have complited a MSc degree from pune univeristy,worked as a geologist in geotechnical field,wel known to GPS ( Trimble Geoexplorer 3 )

A proactive leader with extensive reliability centered maintenance management and hands-on experience in the repair, overhaul and troubleshooting of mobile equipment, initiate change and reengineering of quality improvement processes while maintaining a positive, safe and productive environment.

Telecom Transmission Engineering, Computer and Electronics

management of project liaison (client to main EPC Contractors) & International Busines Development

Multi skilled and flexable. Highly experienced mechanical fitter presently contracted to ITT Systems Division, Kuwait. More than 12 years overseas experience, working in Europe and the Middle East.

12 + Years HSE experience, HSE professional Tech IOSH; NEBOSH & (USA) NASP safety certification (Equiv DIP)

welding of pressure/vacuum vessels, fabrication of heavy plant and machienery

Supervision, planning, scheduling, coordination, maintenance (prevantive & breakdown), budgeting/forecasting, optimum inventory management, resource development & deployment, utilities etc.

Electrical Engineer, Six Sigma, Lean, Manufacturing

Geologist

Seeking challenging plant manager position. Degrees in Business Administration, Mining Engineering, and Metallurgical Engineering. Experience in mining, mill operations, and maintenance. Have worked in both union and non-union environments.

Over 25 years Quality Management Supervision experience in the Oil & Gas and Heavy Engineering construction.

Bachelor Degree in Computer Engineering/ A+ Comptia Certified

There are only two geologist, that includes myself, responsible in all geological work in the pit. our work covers pit geology,drilling,engineering geology and hydrogeology. With my training in the field, I have adopted a quick and alert response towards an assigned tasks both mentally and physical

2+ experience Mining Engineer at mine production in Africa. Experienced Drill and Blast Engineer

Planning / Project Controls Manager , PMP certification, Primavera 3.1 / 6 professional user, Civil Engineer, Cost Control and Claims experience

Multi lingual professional with MBA in Supply Chain Logistics. A proven effective communicator and negotiator with extensive experience in field operations supporting military, humanitarian and commercial operations.

Currently working as a Mining Technical Services Superintendent with 10years underground mining expeirence. I hold a B.Min.Sc. in Geology.

Automation/Electrical/Instrumentation/Supervisor

Always i think on fo my job safety and every day better

Excellent experience, coupled with a strong quantitative and analytical background, makes me an excellent candidate

Geologist with good expertise in planning, follow-up and reporting of geotechnical and geophysical site-/soil-investigations.

To contribute strong background in project management, civil engineering, contracts and along with unique drive for excellence and success to your firm in a Planning & Control Engineer position.

Junior geologist with some prior experience in both exploration and mining. Skills include mapping, core loging, sampling, 3D modeling (Gemcom), statistical evaluation, grade control and reconciliation. Strong communication skills. Available immediately.

BSc in mining engineering

I am a young energetic Mine Surveyor who has a three year diploma certicate from Kwame NkrumahUniversity of Science And Technology, School of Mines, Tarkwa, Ghana. I have the ability to deliver on time to time and with minimum supervision.

Strong geological background including Mineralogy, Sedimentology and Stratigraphy, Structural Mapping and Structural Geology, Paleontology, Geographic Information Systems and Remote Sensing, Geomorphology, Climate Change, Evironmental Geology, GIS, Remote Sensing.

having 5 years experence by using cad tools such as proe catia associated with automotive\offhighway industries

Master in management, law enforcer, founder of community service organization APO St. Anne College Lucena City

B.Tech (mining) with 1st class mine managers certificate issued by the board of mining examinations

Trad qualified Fitter and Turner with extensive experience in the repair and maintenence of pumps and pumping equipment.

Drilling professional for 20+ years; extensive international well construction supervisory experience; directional, drilling engineering and management experience; drilling project manager of China’s first horizontal multilateral CBM well.

A highly experienced Sr. Chemist with postgraduate qualification in Analytical Chemistry from AMU Aligarh University, India. Possessing 14 years of experience in operation and management of environmental protection, power and desalination plant and R&D laboratories. Expert in analytical technique

As a Mining Engineer, I have technical knowledge and managament skills. Computer skills (MS Word, Excel, Power Point). Drilling, Blasting. Tunneling. Development, Preparation and Production.

Licenced Electrician, Refrigeration Mechanic, Qualified Fitter and Turner, Cert 4 Assesment and Workplace Trainer, Workplace Health and Safety Officer. Trade foreman

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 [ 42 ] 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out