Resume - Research Experience: Polymer solutions and adsorption behavior.

Misco Jobs

Resume #19884

CONTACT INFORMATION:
View contact information...

CAREER OBJECTIVE: Aiming at a position in a Academic pursuit/Chemical Industry, where
One's ability of Visualization, research inclination and administrative
Skills can suitably be rewarded.

RESEARCH EXPERIENCE:- Polymer solutions and adsorption behavior.
- Solution property studies of water soluble polyelectrolytes q Aggregation and micelles behavior of individual surfactants and in polymer surfactant mixtures.
- Non – electrolytes binary and ternary mixtures evaluation of excess function and theoretical modeling.

WORKING EXPERIENCE:
- Had worked as Project Fellow in UGC major research Project at Department of Chemistry, Sardar Patel University, Vallabh Vidya nagar (Gujarat) from October 10,1994 to April 17,1998. Carried out research work (literature survey & laboratory work) on a specific research problem of "Physico-Chemical Interaction of Water soluble Polymers at solid/aqueous interface". Various physico – chemical methods and also analytical techniques were used to study solution and adsorption behavior of industrial polyacrylamides in aqueous solution as well as in presence of additives.

- Have been working as a Senior Lecturer in Nirma Institute of Technology (One of the renowned Engineering institution of Nation) since July 28,1998 till date. Nature of work involves conducting Lectures, Teaching in classroom, Instructions in Laboratory, Students Assessment and evaluation, Co-curricular and extra curricular activities, Teaching and other duties assigned by the Head of the Department and Director from time to time.

Teaching following subjects at B.E.(Degree) levels:
2 PHYSICAL & ANALYTICAL CHEMISTRY:
Solutions; Catalyst; Photochemistry; Physical Properties and Chemical Constitution; Experimental Techniques in Reaction Kinetics; Measurement of pH; Nuclear Magnetic Resonance; Ultraviolet spectroscopy; Introduction to Chromatography
2 ORGANIC CHEMISTRY:
Alkenes; Stereochemistry; Carboxylic acid; Chemistry of various organic compounds; Petrochemicals; Outlines of Biochemistry; Carbohydrates; Chemistry of selected organic compounds; Polynuclear Aromatic compounds; Chemistry of Heterocyclic compounds; Chemistry of Dyes
2ENGINEERING HEMISTRY:
Organic Reaction; Electrochemical Systems; Surface Chemistry; Reaction Kinetics and Catalysis; Water; Fuels; Lubricants and Greases; Polymers,composites and adhesives; Colloids; Chemistry of conducting materials, magnetic materials and ceramic materials; Corrosion; Introduction to chemistry of oil, fats, soaps, detergents, drugs and antibiotics

INSTRUMENTAL TECHNIQUES KNOWN:
Potentiometer, pH meter, Rheotest meter, Polarography, UV-Vis Spectrophotometer,
Flame photometer, Karl-Fisher, Carbon black dispersion tester, Melt flow indexer, HPLC, GC-mass.

RESEARCH PAPERS PUBLISHED:
1) N.V.SASTRY& P.N.DAVE
Thermodynamics of acrylic esters - organic solvents.(I) Excess volumes and isentropic compressibilities of acrylic esters-n-Heptane,-Carbon tetrachloride,-Chlorobenzene and –o-Dichlorobenzene mixture at 303.15 K.
Int. J.Thermophysics 17,1289-1304(1996).

2) N.V.SASTRY& P.N.DAVE
Thermodynamics of acrylic esters - organic solvents.(II) Viscosities of acrylic esters-n-Heptane,-Carbon tetrachloride,-Chlorobenzene and –o-Dichlorobenzene mixture at 303.15 K.
Thermo.Chim.Acta.,294,1-12(1996).
3) N.V.SASTRY& P.N.DAVE
Thermodynamics of acrylic esters - organic solvents.(III)Excess dielectric functions of acrylic esters-n-Heptane,-Carbon tetrachloride,-Chlorobenzene and –o-Dichlorobenzene mixture at 303.15 K.
Proc.Ind.Acad.Sci.Chem.Sci.108(3),1-10(1997)
4) N.V.SASTRY& P.N.DAVE
Dilute solution behaviour of Polyacrylamides in aqueous media.
European Polymer journal, 00,1-9(1998)
5) N.V.SASTRY &P.N.DAVE
Adsorption Behaviour of Surfactant-Polyacrylamide mixture with kaolin.
Journal of Surfactants and Detergents, Vol.2, No.4,459-472(1999)
6) P.N.Dave & A.K.Bhardwaj
The adsorption behavior of polymeric surfactants of pluronic and tegoprenes in dilute solutions Proceedings, CHEMCON-99, I.I.Ch.E.
7) P.N.Dave & A.K.Bhardwaj
Thermodynamics of micellizationm and interfacial adsorption of polyoxyethylated phenol in 0.01 M NaCl at air-water interface
Proceedings, National Convention of Chemistry Teachers (NCCT-2004)

Research paper Communicated:
1) P.N.Dave, S.S.Sait & N.J.Parmar
Adsorption behavior of polyacrylamide on oxide surfaces.
European Polymer Journal
2) P.N.Dave, S.S.Sait & N.J.Parmar
Thermodynamics of micellization and interfacial adsorption of polyoxyethylated octyl phenol in 0.01 M NaCl at air-water interface.
Journal of Surfactants and Detergents

Research Papers Presented:
- Presented research paper on "DILUTE SOLUTION BEHAVIOUR OF POLYACRYLAMIDE IN AQUEOUS SOLUTIONS" in National Symposium on polymers held at Sardar Patel University, Vallabh Vidyanagar on February 26-27,1996.

- Presented research paper on "THE ADSORPTION BEHAVIOUR OF POLYMERIC SURFACTANTS OF PLURONIC AND TEGOPRENES IN DILUTE SOLUTIONS' IN CHEMCON-99 Organized by I.I.Ch.E. at Panjab University, Chandigarh on December 20 – 23, 1999.
- Presented research paper on "THERMODYNAMICS OF MICELLIZATIONM AND INTERFACIAL ADSORPTION OF POLYOXYETHYLATED PHENOL IN 0.01 M NACL AT AIR-WATER INTERFACE" in 4th National Convention of Chemistry Teachers (NCCT-2004) organized by Gujarat Council of Science City and Department of Science & technology on 30-31st October-2004.

Lectures delivered in AICTE sponsored Short Term Training Programme:

4 Delivered a lecturer on "Phase Transfer Catalysis: An Overview", in a STTP on "Recent Advances in Catalysis and its applications" on 29th November,2004 at Nirma University of Science and Technology, Chemical Engineering Department.
4 Demonstrated an experiment on "To study the effect of time factor on the activity of the enzyme catalase", in a STTP on "Recent Advances in Catalysis and its applications" on 01 st December, 2004 at Nirma University of Science and Technology, Chemical Engineering Department.
4Delivered a lecturer on "Trends in Chemical Industries", on "National Technology Day " on 11th May,2001 at Dintex Dye Chem Ltd.,Ahmedabad.

Book written:
Written Chemistry part in "Dictionary of Technical terms", Shreeji 2002,Publication, Ahmedabad
"Dictionary of Chemicals and Chemistry words", Shreeji Publications, Ahmedabad.

PROFESSIONAL TRAINING:

- QIP certificate course on "Corrosion Control"at IIT,Bombay from May 24,1999 to May 29,1999.
- "Analytical Instrumentation Techniques" Underwent hands-on training on HPLC,HPTLC, GC-mass, AtomicAbsorption spectrophotometer(AAS) & UV-Visible spectrophotometer at Kroma Labs.,Vatva, Ahmedabad from January 06,2000 to January 13,2000.
- QIP certificate course on "Interfacial & Colloidal Phenomena" at IISc,Bangalore from February 21,2000 to February 25,2000.
- "Yoga Teacher Training Programme". Learnt Basic Yoga, Pranayam and meditation techniques at Shivanand Ashram, Ahmedabad from May 10,2000 to May 30,2000.
- UGC sponsored "Refresher Course in Chemistry" at Academic Staff College, Gujarat University, Ahmedabad from March 31,2001 to April 17,2001.
- UGC sponsored "Orientation Course" Academic Staff College, Gujarat University, Ahmedabad from June 02,2001 to 25/06/2001.
- "Programming with C++ "(Full Time) at Nirma Institute of Technology from July 23,2001 to July 28,2001 and two hours a day from July 30,2001 to August 14,2001.
- STTP sponsored course on "Energy Management and Optimization in Chemical Process Industries" arranged during 16th-27th December,2002 at Nirma Institute of technology, Ahmedabad.

AWARDS AND HONORS:
- Received award of Project Fellowship from University Grants Commission, New Delhi for three years.
- Worked as a subject expert for the selection of PG teacher chemistry on 19th April,2002
At Delhi Public School, Ahmedabad.
- Delivered speech on the third "National Technology Day" celebration on 11th May 2001 at Dyntex Dyechem Limited,Ahmedabad.
- The research proposal entitled " Studies on Adsorption Characteristics of Polyelectrolytes at Solid/Liquid Interface and their Influence on Colloidal Stability" has been submitted under the scheme of Financial support for Major research projects in University Grants Commission,New Delhi.
- In Nirma Institute of Technology I had developed laboratories like Physical Chemistry, Organic Chemistry, Inorganic Chemistry and Polymer Science from the scratch and has been actively taking part in the all round development of the chemical Engineering Department.
- As I am working as a Lecturer, I have developed excellent skills and leadership qualities.

EDUCATION:
- Awarded Ph.D. Degree in Physical/Polymer Chemistry from Sardar Patel University,Vallabh Vidyanagar in 1998.
- Passed M.Sc. (Physical Chemistry) First class with distinction (73%) in 1994 from Sardar Patel University,Vallabh Vidyanagar.
- Passed B.Sc. (Chemistry) with First class(60%) in 1992 from Saurashtra University, Surendranagar.

Title of Ph.D. Thesis:
"Studies on Physico- Chemical Interaction of Water Soluble Polymers at Solid/Liquid Interface".

PERSONAL QUALITIES:
* A thirst for knowledge.
* A desire to do good.
* A lust for control.
* Willingness to take stretched targets.
* Confidence to deliver results in highly competitive situations.
* And, ultimately, a messianic visions to feed the world.

STRENGTHS:
* Knowledge of techniques applied to water soluble polymers.
* Scientific approach to problem solving.
* Pragmatic attitude.
* Possess a high degree of empathy, sensitivity to the needs of people and passion to increase knowledge.
* Ambition to grow and ability to learn.

MOTTO:
Firm belief in every disciplined effort, which earned multiple rewards.

Contact Address: 8-Sahyog Apartment
Near Vejalpur Busstop,
Behind Shrinandnagar,
Ahmedabad-380051
Gujarat,India

SPORTS AND OTHER ACTIVITIES:
- Have been Played Cricket at University level.
- Have been Captain of Nirma Education and research Foundation Cricket team.

COMPUTER LITERACY:
A Knowledge of MS-OFFICE,C, C++, Software packages: ISIS draw, HYSIS
And Friendly with Internet

References:
Available on request

Declaration:
I do hereby declare that, to the best of my knowledge, the above information is true and correct.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2251 to 2300 of 3493)

Go to Search Parameters...

Brief Description

I am currently working in an Offshore Vessel as an Electrician. I've worked experienced in Petro-Chemical Plant in Saudi & CHEVRON, Angola Africa as Maintenance Electrician. I am a Registered Master Electrician with PRC Licensed no. 0023265. I am currently looking for a job.

Very experienced Welder, Pipe fitter, Foreman

Attached please find my CV as application for the above or another suitable position.

Good manager- exact-lovely-like travel-profetional in supporting in surface and tunnel excavation-english and arabic and farsi -hard worker

Inspection, Record Keeping, Supervision, Lighting, Fire Alarm and Communication Installations in all the buildings, Cable pulling/arrangement/terminations, Panel Installations, Cable tray and Assorted Fabrications, Piping( PVC and Galvanized Steel), Pre and Post Termination Tests, Maintenances.

Production supervisor. Supervision and management of numerous mining, earthworks and civil construction projects in Australia and Africa. Experienced in operation of all surface mining equipment. Training of operators.

Experienced professional in Accounting

Geologist with 5 years experiences, with a blend of strategic and operational experience in coal exploration, with the combination of hard skill in geological mapping and drilling with soft skill in geographic information system, geological database up to geological modeling.

Qualified Plant Mechanic (UK City and Guilds Level III) currently working on contract with US Army in Savannah, Georgia, seeks contract in Australia. Anything considered.

Senior Technical Writer with >5 years experience

Knowledge of engineering theories and practices and an understanding of environmental principles involves with exploration, drilling, production and development operations.

Good understanding of power/load calculation, drawing of wiring diagram, trouble shooting, installation of electric motor, contactor circuit, transformator and PLC

10+ years expereince in accounting, tax, audit. Expert in implementing MYOB Accounting

An M.Tech(Electronics) graduate with work experience in Industrial Automation, Embedded programming and teaching.Key skills include:SCADA, C, C++, Embedded C, VHDL, Verilog, MATLAB, Communication Protocols.At present, working for ABB India and has successfully completed a number of projects.

Microsoft Office, HRMS, Windows XP, Professional, other administrative softwares

Modeled and prepared detail engineering drawings for the projects executed interference checking and subsystems interfacing for the entire equipment.

As evidenced by resume I am extremely skilled in sales management and business development. I have extensive knowledge and experience in electrical, mechanical, mining ans sales/service management.

17 years safety experience, Grad Dip OHM, MSIA, (RSP Australia), Trainer

Piping designer

Construction Management/Estimating/Supt/PM

Seeking Managerial or Supervisory position in Logistics & Transportation.

Chief Enineer, Limited, Oceans, Unlimited HP

A Safety Advisor who works with Management and Front-line workers equally to not only get the job done, but to make sure we get it done safely.

Experience in Automation Systems (Triconex Safety Control Systems, Honeywell FSC). Bachelor of Telecom/Control Systems Engineering. Experience in GCC countries. Currently working as an Application Engineer

23 Years of Various field of accounting

Director

Underground Miner : position in a Company where training abilities, work experience and advancement capabilities can be demonstrated.

Mechanical Engineer with experience in technology applications in different industries such as mining, oil and gas, & construction. During the past years I have worked with a Canadian company and greatly valued the experience and challenge. I am currently looking for full time employment in Canada

Shift Supervisor Shift Foreman

I have been working in the Safety, Health and Environmental (SHE) field for more than 9 years. Throughout these years I have been exposed to various SHE related requirements and problems. One of my key competency area will be managing workplace day-to-day safety, health and environment issues and

I am seeking Medical Advisor/Occupational Health position to continue my occupational physician’s career with a multinational company.

Welder Fitter, with pressure certification (F3/F4 on 5G uphill progression -mild steel). Worked in fabricating shop on commercial and industrial products. Very proficient with GMAW and SMAW. Little experience with GTAW. Worked mostly mild still and some alloy. Little aluminum experience.

Journeyman Industrial Electrician , Apprentice Instrumentation Mechanic / PLC , DCS, HMI, SCADA . Underground / Surface, Oil and Gas, Mining

Handle preventive maintenance for the machine , servicing machine ,replace breakdown component /or equipment.

RSLogix 5000, PLC 5, SLC (Allen Bradley) Concept (Modicon, Quantum) Unity (Modicon, Quantum, M340, etc.) Setting up and commissioning of Advantys IO systems Rockwell, RSView Wonderware, Intouch

My areas of expertise are production, short-term planning and project management. I am a troubleshooter and leader that use influence to get things done

I am an electrician and electrical contractor. I have been involved in a variety of different projects including a Power Station, Coal Mine, Prision and an Airport.

Engineer / Management / Accounting / IS

i have three month experience in the oil field and one year experience on the mining field as a junior geologist. my duties are core logging,sampling, underground mapping and data acquisition,and Running/Monitoring (data collection) and processing of crude oil to the surface.

Driver, teacher, maintenance computer, air conditioning and electrician

Graduate degree in mineral processing engineering. Having more than 6 years of work experience in china clay and beach sand mineral industry.

I am currently Regional Safety Manager with Thiess John Holland in Melbourne Australia. I have extensive rail, mining and construction experience and have been involved in these industries for over 15 years. I have international experience, working with the Taiwan High speed rail project.

Achieve sustainable profit growth and customer happiness using technology to reduce costs and increase effectiveness of employee time.

Certified Safety Professional with over 20 years experience, in multiple industries, including oil and gas, medical, transportation, environmental and manufacturing.

Quality Control professional

Rotating & reciprocating equipment technician

Research Experience: Polymer solutions and adsorption behavior.

I am a Mechanical Engineer with a background in Electronics Technology. I have worked 2 summer for a Fording Coal Ltd. as a Mechanical Engineer. Currently I work for Weyerhaeuser as a Maintenance Engineer. I wish to back to the mining industry.

I am a Mining Engineering who graduated in 1999. After going through graduating training, I was appointed Overseer Miner at an Underground mine and then Shift Foreman at an Open pit mine. I have used the following computer packages, Lynx mining and SurpacVision.

I am looking for permanent employment at a company where I can use my training and experience to perform my job function. I would like to work for a company where advancement in to management or some other professional aspect of the company is a possibility

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 [ 46 ] 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out