Resume - Mechanical Engineer with experience in technology applications in different indu...

Misco Jobs

Resume #2501

CONTACT INFORMATION:
View contact information...

CAREER OBJECTIVE

To participate in the development, integration, and support of technology systems in the mining, oil and gas, and construction industries. Analysis of the information provided by these systems in order to guide the customer through successful implementation. Additionally, provide feedback from the field to improve the system and to complete the design cycle.

PROFILE

Dynamic, self-motivated, responsible, organized, spontaneous, able to work unsupervised, available to work anywhere and will travel, curious, open to dialog, joyful, and able to work under pressure. A natural aptitude for learning new computer orientated skills.

WORK EXPERIENCE

Projects Engineer:
GECOLSA (Caterpillar Dealer in Colombia) August 2002 – currently)
- In charge of all special projects and developments in order to improve the management process in the Dealership.
- Project coordinator for the assessment of DBSi (Caterpillar Mission Critical Application) in GECOLSA and for the installation of the DBS software in MACORP (Caterpillar Dealer in Guyana, South America).
- Black belt for SIX SIGMA projects in GECOLSA.
Support Engineer:
GECOLSA (Caterpillar Dealer in Colombia) April 1999 – August 2002

- Installation, commissioning and support of 10 Aquila systems at Intercor Mine site in Colombia. With this experience I proposed some improvements for the depth encoder device installed on DMM IR drills. I was in charge of the inventory management and the warranty procedures including some administrative tasks like the Field Service Report issuing. Guided the customer in the proper use of the information provided by the system. Additionally, I was part of the crew that installed the Trimble radio infrastructure, METS software, and the GPS base.
- Responsible for hiring, training, and managing of the dedicated support person for the Aquila systems at Intercor Mine site.
- Installation, commissioning, and support of 5 dozer CAES trial systems at Intercor Mine site. In charge of all technical support for the office software (CAESOffice and METS) and for the onboard hardware during the time of the trial.

EDUCATION

Mechanical Engineering Degree
Universidad Nacional de Colombia
Oct 1998
Recognized by the Canadian Council of Professional Engineers (CCPE).

SOFTWARE SKILLS

General Software:
Microsoft Office, Windows 95/98/2000/NT, Microsoft Project, Microsoft Access and ODBC links, Internet Software.

Specific Software:
Caterpillar Software: METS Manager, METS Diagnostics, CAESOffice, Caterpillar MCS (Maintenance Control System), DBS (Dealer Business System)
Aquila Software: Aquila Report Manager, AQ2DB, QRemote, Aquila Browser.
Trimble Software: Commset, Ctoolbox, Remote Controller, TXRX.

LANGUAGES

Spanish (native), English (fluently)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2251 to 2300 of 3493)

Go to Search Parameters...

Brief Description

I am currently working in an Offshore Vessel as an Electrician. I've worked experienced in Petro-Chemical Plant in Saudi & CHEVRON, Angola Africa as Maintenance Electrician. I am a Registered Master Electrician with PRC Licensed no. 0023265. I am currently looking for a job.

Very experienced Welder, Pipe fitter, Foreman

Attached please find my CV as application for the above or another suitable position.

Good manager- exact-lovely-like travel-profetional in supporting in surface and tunnel excavation-english and arabic and farsi -hard worker

Inspection, Record Keeping, Supervision, Lighting, Fire Alarm and Communication Installations in all the buildings, Cable pulling/arrangement/terminations, Panel Installations, Cable tray and Assorted Fabrications, Piping( PVC and Galvanized Steel), Pre and Post Termination Tests, Maintenances.

Production supervisor. Supervision and management of numerous mining, earthworks and civil construction projects in Australia and Africa. Experienced in operation of all surface mining equipment. Training of operators.

Experienced professional in Accounting

Geologist with 5 years experiences, with a blend of strategic and operational experience in coal exploration, with the combination of hard skill in geological mapping and drilling with soft skill in geographic information system, geological database up to geological modeling.

Qualified Plant Mechanic (UK City and Guilds Level III) currently working on contract with US Army in Savannah, Georgia, seeks contract in Australia. Anything considered.

Senior Technical Writer with >5 years experience

Knowledge of engineering theories and practices and an understanding of environmental principles involves with exploration, drilling, production and development operations.

Good understanding of power/load calculation, drawing of wiring diagram, trouble shooting, installation of electric motor, contactor circuit, transformator and PLC

10+ years expereince in accounting, tax, audit. Expert in implementing MYOB Accounting

An M.Tech(Electronics) graduate with work experience in Industrial Automation, Embedded programming and teaching.Key skills include:SCADA, C, C++, Embedded C, VHDL, Verilog, MATLAB, Communication Protocols.At present, working for ABB India and has successfully completed a number of projects.

Microsoft Office, HRMS, Windows XP, Professional, other administrative softwares

Modeled and prepared detail engineering drawings for the projects executed interference checking and subsystems interfacing for the entire equipment.

As evidenced by resume I am extremely skilled in sales management and business development. I have extensive knowledge and experience in electrical, mechanical, mining ans sales/service management.

17 years safety experience, Grad Dip OHM, MSIA, (RSP Australia), Trainer

Piping designer

Construction Management/Estimating/Supt/PM

Seeking Managerial or Supervisory position in Logistics & Transportation.

Chief Enineer, Limited, Oceans, Unlimited HP

A Safety Advisor who works with Management and Front-line workers equally to not only get the job done, but to make sure we get it done safely.

Experience in Automation Systems (Triconex Safety Control Systems, Honeywell FSC). Bachelor of Telecom/Control Systems Engineering. Experience in GCC countries. Currently working as an Application Engineer

23 Years of Various field of accounting

Director

Underground Miner : position in a Company where training abilities, work experience and advancement capabilities can be demonstrated.

Mechanical Engineer with experience in technology applications in different industries such as mining, oil and gas, & construction. During the past years I have worked with a Canadian company and greatly valued the experience and challenge. I am currently looking for full time employment in Canada

Shift Supervisor Shift Foreman

I have been working in the Safety, Health and Environmental (SHE) field for more than 9 years. Throughout these years I have been exposed to various SHE related requirements and problems. One of my key competency area will be managing workplace day-to-day safety, health and environment issues and

I am seeking Medical Advisor/Occupational Health position to continue my occupational physician’s career with a multinational company.

Welder Fitter, with pressure certification (F3/F4 on 5G uphill progression -mild steel). Worked in fabricating shop on commercial and industrial products. Very proficient with GMAW and SMAW. Little experience with GTAW. Worked mostly mild still and some alloy. Little aluminum experience.

Journeyman Industrial Electrician , Apprentice Instrumentation Mechanic / PLC , DCS, HMI, SCADA . Underground / Surface, Oil and Gas, Mining

Handle preventive maintenance for the machine , servicing machine ,replace breakdown component /or equipment.

RSLogix 5000, PLC 5, SLC (Allen Bradley) Concept (Modicon, Quantum) Unity (Modicon, Quantum, M340, etc.) Setting up and commissioning of Advantys IO systems Rockwell, RSView Wonderware, Intouch

My areas of expertise are production, short-term planning and project management. I am a troubleshooter and leader that use influence to get things done

I am an electrician and electrical contractor. I have been involved in a variety of different projects including a Power Station, Coal Mine, Prision and an Airport.

Engineer / Management / Accounting / IS

i have three month experience in the oil field and one year experience on the mining field as a junior geologist. my duties are core logging,sampling, underground mapping and data acquisition,and Running/Monitoring (data collection) and processing of crude oil to the surface.

Driver, teacher, maintenance computer, air conditioning and electrician

Graduate degree in mineral processing engineering. Having more than 6 years of work experience in china clay and beach sand mineral industry.

I am currently Regional Safety Manager with Thiess John Holland in Melbourne Australia. I have extensive rail, mining and construction experience and have been involved in these industries for over 15 years. I have international experience, working with the Taiwan High speed rail project.

Achieve sustainable profit growth and customer happiness using technology to reduce costs and increase effectiveness of employee time.

Certified Safety Professional with over 20 years experience, in multiple industries, including oil and gas, medical, transportation, environmental and manufacturing.

Quality Control professional

Rotating & reciprocating equipment technician

Research Experience: Polymer solutions and adsorption behavior.

I am a Mechanical Engineer with a background in Electronics Technology. I have worked 2 summer for a Fording Coal Ltd. as a Mechanical Engineer. Currently I work for Weyerhaeuser as a Maintenance Engineer. I wish to back to the mining industry.

I am a Mining Engineering who graduated in 1999. After going through graduating training, I was appointed Overseer Miner at an Underground mine and then Shift Foreman at an Open pit mine. I have used the following computer packages, Lynx mining and SurpacVision.

I am looking for permanent employment at a company where I can use my training and experience to perform my job function. I would like to work for a company where advancement in to management or some other professional aspect of the company is a possibility

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 [ 46 ] 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out