Resume - OBJECTIVE: A position as an Environmental, Health and Safety Manager.

Misco Jobs

Resume #2517

CONTACT INFORMATION:
View contact information...

January 2001 – February 2003    Environmental/Safety Manager
Ash Grove Cement Company Inkom, ID
•Clean Water Act (CWA): Managed Stormwater Pollution Prevention Plan (SWPPP) to include updating and maintaining current program. Conducted sampling events/Inspections; developed a records management scheme to demonstrate compliance with the CWA.

•Clean Air Act (CAA): Managed all aspects of Tier I (Title V) and Tier II operating air permits. Wrote and submitted several permit-to-construct documents to IDEQ/EPA for approval.

•PC-MACT (NESHAP): Coordinated and managed all aspects of 40 CFR part 63 LLL (PC-MACT NESHAP), as it related to the plant affected sources (ESP inlet temperature control for the two rotary kilns), along with mill circuits.

•Resource Conservation and Recovery Act (RCRA): Waste management/characterization to maintain Conditionally Exempt Small Quantity Generator (CESQG) status. Profiled and disposed of hazardous waste. Developed Waste Management Plan for plant/quarry.

•MSHA/OSHA Compliance: Continuously directed efforts towards ensuring compliance with federal and state safety laws and regulations including MSHA/OSHA. Worked with employees to develop safe job procedures for their work areas through Job Safety Analyses and ensured that they were consistently followed. Coordinated the purchasing of proper safety equipment including personal protection equipment, first aid supplies, etc. Coordinated the proceedings of Safety and Health Committee meetings and monitored its activities. Additionally, I was responsible for administering first aid and CPR as needed. Currently seeking certification as an Emergency Medical Technician (EMT), with coursework completed. Written test to be taken in April 2003

April 2000 – January 2001 Regulatory Compliance Specialist/MSHA Trainer
             J.R. Simplot Company (Smoky Canyon Mine) Afton, WY
•Clean Water Act (CWA): Managed the Storm Water Pollution Prevention Plan (SWPPP) to include updating and maintaining current files; Conducted sampling events/Inspections; developed a records management scheme.
•Resource Conservation and Recovery Act (RCRA): Waste management/characterization to maintain Conditionally Exempt Small Quantity Generator (CESQG) status. Profiled and disposed of hazardous waste. Developed Waste Management Plan as well as Emergency Preparedness plans for facility/operations.
•Certified MSHA Trainer in Safety Department: I received my instructor training certification card from the Mine Safety and Health Academy in Beckley, West Virginia in September of 2000, to include first aid. Once this was completed, I conducted health and safety training to include new miner, newly hired experienced miner, annual refresher, task training, and site-specific hazard awareness training under 30 CFR Part 48/46 training regulations.

May 1993 – August 1996    Environmental Sciences Specialist
            Idaho Department of Environmental Quality (IDEQ)     Pocatello, ID
•Primary Duties and Responsibilities: Conducted regulatory research with respect to the CleanWater Act (CWA), Safe Drinking Water Act (SDWA), Resource Conservation And Recovery Act (RCRA), Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) Title III of (SARA) Emergency Planning and Community-Right-To-Know Act (EPCRA). Reviewed and commented on storm water NPDES permits for several counties in Southeast Idaho. Performed critical editorial reviews and Quality Assurance on various documents. Created maps with GIS software (ArcView) for stream coverage in Southeast Idaho.
Developed working relationship with other state and federal agencies including EPA, as well as with private landowners. Conducted water quality monitoring under section 303(D), of the Clean Water Act. Strong written and verbal communication skills as well as strong organizational skills coupled with the ability to manage multiple tasks at once with little or no supervision.

EDUCATION
Bachelor of Science, Biology (1993) Idaho State University, ID
Pertinent Graduate Classes Taken: Environmental Law and Regulations, Environmental Science and Pollutants, Toxicology, Waste Site Remediation Technologies, Wastewater Engineering, Microbial Ecology, Survey of Hazardous Waste Management, Environmental Engineering Seminar.
Pertinent MSHA Sponsored Courses Completed: 3-day Noise and Dust monitoring and sampling workshop, New Braunfels, Texas (10/02). 5-day Certified Instructor Training Workshop to include first aid, Beckley, West Virginia, Mine Health and Safety Academy (9/00).
Equipment and Knowledge: Continuous Emission Monitoring Systems (CEMS), and Continuous Opacity Monitor Systems (COMS). Quest Q-300 dosimeter, Industrial Scientific multi-gas meter, and MSA ELF Dust sampling monitor.
Computers/Software: Microsoft Windows NT package includes Access, Word, Excel, and PowerPoint.

REFERENCES AVAILABLE UPON REQUEST

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1101 to 1150 of 3490)

Go to Search Parameters...

Brief Description

OBJECTIVE: To Obtain a Position as a Shovel Operator, Excavator Operator, Electrician, Dozer Operator, Foreman or in Safety Department

A highly motivated person willing to work my way forward. experienced and eager to learn, most of all I am willing to learn.

OBJECTIVE: A position as an Environmental, Health and Safety Manager.

Core Logging, Bore Hole Logging, Rock Identification, Reserve Estimation & Calculation, Liasioning With Govt.

Experience in Engineering, Exploration and Environmental Geology. Advanced First aider, Defensive driving and Incident Manager. Well adapted to site safety with skills to implement site safety

Tangible experience in crushing, screening, HMS, dewatering, coke making and Gas cleaning. I am a holder of a brilliant BSc (Hons) Degree in Metallurgical Engineering. Being a good communicator, I am a very dynamic, self motivated and analytic team player who is result oriented.

Environmental geology on 2009.I am seeking for a volunteering job in geology immediately as i have enough free time.I

DIPLOMA IN MECHATRONICS Engineer

I have done my Diploma in Mechanical Engineering.I have experience is more than one domain in the Engineering,such as Production supervisor,Production Technician and drafter as well.

Strong in mechanical,electrical and plumbing.mobile or fixed equipments or engines are my categories where I am efficient as a hard worker, innovative, result oriented

Red Seal Millwright, Class 1 Drivers Liscense, Mine Rescue, First Aid Ticket, H2S Alive, Whimis, Confined spaced entry and rescue, Fall protection.

B.Sc Honours Mining Engineering

ERZ Controller (Underground Deputy)

20+ years exp and Involved in the commissioning of Copper/Gold Mine, Barrick Buzwagi

BSc Hohours Degree in Mining Engineering, Now working as Planning Manager for an Open Pit operation. Very good in Planning , using Surpac Mining software.

My experience in construction 6 years with contactor company.

Competent Mine Geologist, Key skills - Analytical, underground mapping, core logging, Resource estimation using Datamine as well as leadership skills

Qualified Boilermaker/ Welder, with over 25 years experience, mostly on mines and construction.

Hard Rock Miner / Diamond Driller experienced in all phases of narrow vien gold mining and block & cave molybdenum mining.Diamond Driller using a Hagby 300 rotary drill. Also some experience as relief shift boss

Sr. Geotechnical Engr, Design and Construction of Underground Structures, Mgmt of Multidisciplinary Projects, Numerical Modeling, Rock Mechanics, Ground Support Design, Tunnel Inspections, Hands-on Experience in Applying FLAC, FLAC3d, UDEC and 3DEC Codes in Design, Work Under NQA-1 Q A Program

Managment, Project Managment, Geological and Ore Body Modelling Skills

Overseas experience Truck shovel operations Dragline operations Mechanical and electric trucks to 240 ton capacity Cat and Letourneau loaders. Electric and hydraulic shovels and excavators.

Experienced, long and short range, production planner for open cut gold and copper mines in California and Arizona. Skilled professional with supervisory experience. Twelve years MEDSystem experience. Team player with excellent communication skills and perfect safety record.

Recent geological engineering graduate (EIT). Cooperative education background includes various forms of exploration, open-pit and underground mining experience, construction supervision and inspection, monitoring programs, and general geological, environmental, and civil engineering practices.

SUMMARY: Strong foundation in oil and gas, mining and environmental geology, in industry and national laboratory setting.

To obtain a position as an Engineer within a company where my experience and education will provide the opportunity for further growth.

I'm a recent university graduate from York University with a bachelor of Science in Geophysics. I'm looking for an entry level position as a Geophysicist or a related field.

12 year experience in mining industry regarding international contracting, tendering, Project Planning and monitoring, Research and development activities, Mine Production , management, co-ordination.

APPRENTICESHIP TRAINED HEAVY DUTY DIESEL FITTER

Field and Exploration Geologist in Opencast mines on Beach Placer Deposit.

Automotive and Locomotive Mechanic - Knowledgable and Reliable

HR Generalist with 14 years of experience

19 yrs. experience in the construction industry as a foreman/heavy equipment operator/mason Extensive training to accurately and safely operate heavy equipment First Aid and CPR Certified

I have a keen interest in science and its application towards solving problems. I am a creative individual who takes initiative when the situation calls for it. I am very determined and believe in completing what I start, from the planning phase, to the design phase and ultimately the implementation

I am a young professional with BSc Geological Sciences degree, working for exploration company in the position of GIS Intern. I'm self motivated and always in the position to be taught and I'm very fast to understand the need and applications that may be required by any employer.

Geophysicist, Information technology & Communication, Network Engineer, System Administrator, Hardware & Software developer

Exploration geologist with two years of experience in the uranium exploration field.

Having qualified as a construction plant Fitter (heavy diesel Mechanic) in October 2000, I joined the Caterpillar Dealer for Ireland, McCormick MacNaughton. I started my employment as a Fitter in the workshop for two years. Then I got promoted as a Field Service Engineer in January 2003.

Project Manager

Knowledgeable in fossil fuel (coal), power plant bulk materials operations. International experience.

Heavy machinery operator, foreman

PhD and MD in Mining Engineering, Environmental Pollution due Mining Activity, Assesment Impact of the Mining Industry on the Environment

25 years experience in mining Supervisor / Management positions. Proven skills of managing, organizing,planing,problem solving. Proven leadership, communication and decision making skills. Troubleshooting and resolution of mechanical problems.Budgeting, scheduling. Team building, leadership.

More than nine years of hard core experience in Early and Advanced Stage Exploration Environment for Diamond (De Beers) and Base Metal (Anglo American).

Electrical engineering (HC) Diploma; Electrical Power Engineering B-TECH; N4 Electrical engineering; computer skills; decision making; communication skills; problem solving skills; report writing skills; Motivation skills; Interpersonal skills; project management skills; technical skills

Advanced Diesel Technology graduate from WyoTech, experienced underground mechanics

Work well in a team environment Sound judgement, strong quantitative and analytical skills Highly detail orientated and organised Well-developed written and oral communication skills

draughting

Experienced safety professional and proven leader in the Environmental Health & Safety environment. I've developed and successfully implemented several innovative injury prevention programs which has resulted in millions of dollars saved in Workers' Compensation expenditures.

Mining and petroleum engineer for 5 years, and safety researcher for mining industrials in indonesia for 2 years.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 [ 23 ] 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out