Resume - I am currently working in an Offshore Vessel as an Electrician. I've worked exp...

Misco Jobs

Resume #31198

CONTACT INFORMATION:
View contact information...

CAREER OBJECTIVES: To have a challenging, rewarding and promising job as an Electrician.

Work Status: Currently employed in an Offshore Vessel.

EMPLOYMENT HISTORY:
September 2006 to Present GPS Saipem ENI Group
(Platform & Pipe laying Offshore Project)
Saipem DLV (Derick/Lay Vessel)
Castoro Otto

Position: Electrician)

* Synchronizing Powered Diesel AC Generator with PLC control rated 4200 HP, 5.5 KV for Vessel Power Supply.
* Monitoring MW Meters (Active Power), Excitation Current, Stator Current, RPM, instrument temperatures & pressure sensors.
* Hands-on trouble shooting of AC Generators and maintenance of electrical controls and other equipments such as Steam Boiler, Evaporator, Air-compressors, Bilge pumps, Actuator valve magnetic sensor, Incinerator, Fire pumps, Fuel transfer pumps, Water feed pumps, Oil & Water Separator, etc.
* Calibration of Pressure Switches.

February 2004 – Present Al-SUWAIDI INDUSTRIAL SERVICES
Project assigned to Saudi Petrochemical Company
(SADAF/ SABIC)
Location: Jubail, Kingdom of Saudi Arabia
Position: (Electrical Technician)

* Hands-on trouble shooting and maintenance of electrical controls and its electrical equipments even on hazardous location such as Industrial motor AC/DC.
* Performed Preventive Maintenance with Lockout/Tag-out (LOTO) procedures on motor control panels. Including MCC's, Switchgears, Motor Starter Breakers, UPS batteries & its chargers. Subsystems lightings and other control panel boards.
* Assist Engineering Utility personnel during trouble shooting and preventive maintenance of medium and high voltages e.g. 4160 V & 13.8 KV especially during turn around or shutdown activities.
* Performed functional testing in coordination with Instrument Technicians.
* Performed calibration using a current injector on overload relays and contact resistances testing. Also using Surge Comparison Tester, Megger or Insulation Resistance Meter and Multi-tester.
* Experienced on Variable Frequency Drive (VFD), SCR, PLC installation, Power diesel Generator and Motorized Operated Valves (MOV).
* Performed other related duties that maybe assigned from time to time.

July 3, 2001 – August 21, 2002 URBANA 2000
Project: Chevron Texaco (Oil & Gas)
Location: Malongo, Cabinda, Angola Africa
Position: (Industrial Electrician)

* Perform scheduled maintenance (corrective & preventive) on electrical systems.
* Hands-on troubleshooting & repair of electrical equipments.
* Perform scheduled maintenance (corrective & preventive) on electrical systems.
* Perform disassembly, inspection, repair, reassembly, adjustment, testing and calibration of electrical equipment and systems in accordance with pertinent technical manuals, drawings, manufacturer's specifications and standards.
* Diagnose and troubleshoot electrical problems.
* Requisition of necessary spare parts, tools and materials.
* Maintenance of low, medium voltage switchgears and breakers and cathodic protection systems.
* Ensure that all protective and emergency systems are functional and that all tasks are performed in accordance with pertinent electrical safety standards.
* Compliance with Common Maintenance Strategy (CMS).

November 1998 – June 2001 JTL CONSTRUCTION
Project: House & Building Wiring Installation
Location: Philippines
Position: (Building Electrician)

* Lay electrical pipes, cable pulling, Threading/bending of pipes
Such as Emt, IMC and RSCP.
* Install power Panel board, Junction/utility box, pull box, isolator switch, breakers,
Convenience outlet, switches and service entrance.
* Wiring installation, cable pulling and splicing of power & lightings.

February 1997 – October 1998 METITO ARABIA INDUSTRIES, LTD.
Project: Water Treatment Plant & Sewage Treatment Plant.
Location: Kingdom of Saudi Arabia
Position: (Electrical Technician)

* Erection of sewage & water treatment plant (reverse osmosis)
* Lay power cable; install cable tray/gutter, threading/bending of pipes, wiring & Installation of main & local control panel boards.
* Install float level switches, control panel boards high pressures pump, aerator pump, control valves, membrane & ultra violet ozone machine.
* Erection of raw water tank & potable water tank
* Loading Media filters inside the tank with large gravel# 203, medium gravel#197 small gravel #193, course sand #210, fine sand #207 & carbon.
* Project commissioning
* Housekeeping after each work

August 1996 – January 1997 ENGINEERING EQUIPMENT, INC. (EEI)
Project: Servicing/Maintenance
Location: Philippines
Position: (Industrial Electrician)

* Repair/maintain electrical equipments such as AC Diesel Power
Generator Mobile, DC Welding Generator & Air-compressor
* Do preventive maintenance as per schedule
* Render technical service to the client.
* Do house keeping.

March 1995 – September 1996 WILSON CONSTRUCTION
Project: Building Wiring & Installation
Location: Philippines
Position: (Building Electrician)

* Lay electrical pipes, cable pulling, threading/bending of pipes such
As Emt, IMC & RSCP.
* Install power Panel board, junction/utility box, pull box, isolator switch, breakers, Convenience outlet, switches & service entrance.
* Wiring installation, cable pulling and splicing of power & lightings.

July 1993 - February 1995 RIYADH DISTRICT WATER &
Project: SEWAGE AUTHORITY
Riyadh Sewerage Operation & Maintenance
Location: Kingdom of Saudi Arabia, Riyadh
Position: (Plant Maintenance Electrician)

* Obtained work permit prior to commence the work.
* Perform maintenance works on different stations of sewerage plant which Includes troubleshooting/repair, disassemble/assemble of 3 phase motors & Wiring installation.
* Assist Senior Electrician in heavy repairs of High and low-voltage switch gear & Air circuit breakers for industrial application.
* Also assist in synchronization of large AC Generator rated 2 MW.
* Do housekeeping after each work.

January 1992 – May 1993 AL-THINAYAN EST. (K.S.A.)
Project: Maintenance & Servicing
Location: Al-Qassim, K.S.A.
Position: (Pivot/Electrical Technician)

* Erect & install Pivot irrigation system.
* Repair & trouble shoot Pivot irrigation system and its electrical control system.
* Render technical service to the company's clients.

December 1990-December 1991 NEWTON ENGINEERING CORP.,
Project Maintenance & Servicing
Location Novaliches, Quezon City
Position (QA/QC & Service Technician)

* Perform series of testing/Check-up of Ac/DC motors, generator &
Transformer subject for repairs & evaluation.
* Use surge comparison tester, Hipotronic, vibro tester, Galvanometer, Megger or Insulation resistance, multi tester, temperature monitor, tacho meter, growler & Polarity tester.
* Conduct no load testing, current check, temperature, etc., for final evaluation of newly repaired motors.
* Render technical service to the clients.

EDUCATIONAL ATTAINMENT:

ELEMENTARY Banlat Elementary School
Date Graduated 28 March 1977

HIGH SCHOOL Pasong Tamo High School
Date Graduated 26 March 1981

COLLEGE FEATI University
Date Graduated 27 March 1985
COURSE Associate in Electrical Engineering (A.E.E.)

TRAININGS & SEMINARS ATTENDED:

May 3-9, 1992 Technical Service Seminars
Sponsored and Conducted by Valmont Industries Inc. USA

July 3-6, 2000 Personal Safety and Social Responsibilities
Conducted by National Maritime Polytechnic

October 28, 2003 Fall Protection and Ladder Safety
Safety House V.V. Soliven, San Juan, Metro Manila

November 4, 2003 Control of Hazardous Energies
Safety House V.V. Soliven, San Juan, Metro Manila

November 5, 2003 Basic Electrical Safety
Safety House V.V. Soliven, San Juan, Metro Manila

November 19, 2003 Confined Space
Safety House V.V. Soliven, San Juan, Metro Manila

November 22, 2003
1) Fire Safety
2) Hazardous Communication
3) Advanced Chemical
4) Manufacturing Ergonomics
Safety House V.V. Soliven, San Juan, Metro Manila

March 19, 2004 Permit Work Receiver
Conducted by: Saudi Petrochemical Company
Jubail, Saudi Arabia

January 2005-April 2005 Reflexology Seminar (Scientific Massaging)
Conducted by: Mr. Ramon Garcia
Jubail, Saudi Arabia

CONTACT PERSON IN CASE OF EMERGENCY:
Upon request

CHARACTER REFERENCES:
Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2201 to 2250 of 3490)

Go to Search Parameters...

Brief Description

Condition Monitoring Technician - Vibration Analyst Cat III (ISO 18436.2 2008) 15 years experience. CSI and Bently VA products, Fixture and Pruftechnic Alignment experience, Flir Infra red camera experience. Mechanical Commissioning Supervisor - Nickel project 10 months)

I am a post graduate(M. Tech.) in engineering from IIT delhi, recently worked with Qatar Drillcon WLL as site engineer in microtunneling works with AVN 800 B Tunnelling Machine.

Experienced underground Miner I, with six years underground experience. Seeking mining job preferably in Alaska, but will consider other areas.

I am looking for an entry level position in the mining industry. I graduate in December of 2002 with mining degree with a quarrying emphasis from the University of Missouri-Rolla.

jobs wanted anywhere salary as per qualification fresher branch=EEE

I'm looking for a long term employment with retirment and medical

Chemical Engineer seeking internship/future employment

Need a welder?

More than 30 years experience in the field of General Engineering, Plant Maintenance Management, Project Management, Telecommunications, Electrical/Instrumentation and Process Control.

Mechanical Engineer, Project Engineer and Project Management Services

I’m a good communicator who is able to work in a team and can handle pressure. . I am also willing to relocate, work over-time, after hours or/and be on stand-by if and when necessary.

Exploration Geologist

An experienced engineering manager, project manager, and program manager with Department and Division operations experience at engineering and construction, and consulting firms. Experience in multi-disciplinary infrastructure projects and environmental remediation.

Constructional Blasting, Quarry work, Coal Mines

Proficient with Leica RTK GPS, Total Stations & survey specific computer programs; Microsurvey, Autodesk Land Desktop, Leica Geo Office & Excel. Experienced pipe line & fibre optic locator.

Blueprint reading ,Hydraulics,Sheet metal layout, fabrication,Mig, Arc, Gas Welding,3-phase electric motors, Underground explosives

Intermediate Mining Engineer with several years of practical underground metals mining experience.

Safety Officer/Adviser. Cert IV OHS level, Cert IV Training & Assesment. Qld WHSO accredited. 5 years experience - resource, retail industries. Hands on proactive professional to facilitate Safety /Environmental/Risk Management plans/systems to Australian Standards.

Heavy Equipment Mechanic/ Operator/ Welder or Mill Maintenance Mechanic.

an experienced radio communication technician and electronics technician

Machinist,C.N.C. / Manual 20+yrs. experience

Class 1 Drivers License, High School Diploma, Fortlift, Variable Reach( Zoom Boom),Confined Space Entry,Ground Disturbance Advanced, Standard First Aid- Level A CPR, H2S ALIVE, OSSA, CSTS, Q Endorsment( Air Brakes),TDG, WHIMS, Opeator, Oil and Gas, Construction.

Hardworking, Dedicated, trustworthy and have the ability to work with others. Acquired Bsc in Mechanical Engineering. Reliable, Honest, responsible, work well independently and on a team. Prepared to do extra work and can work during emergencies. Single with an excellent health. I enjoy interact

11 years experience in the field of surveying and believe that my background and experience would make me a valuable asset to any organization that is looking for a hard working, trustworthy, and professional field surveyor

Geologist, Environmental, GIS, Modeling

Qualified Geologist (Hons Applied Science) 10 years exploration experience in Soft and Hard rock Geology,( Gold and base metals) (Victoria Western Australia and Queensland experence. Also hold a Masters in Commerce Uni of NSW. Looking for a position in China as wife is from Beijing.

Oil & Gas, Petrochemical Industry Specialist

Ten years experience working as a geologist working in Australia and Eastern Europe. Recent experience has focussed on geological data management, resource modelling and regional exploration. Gold and copper experience from grassroots to feasibilty stage.

Professional Contract Chef / EMR Available

I am looking for a job as Technical Manager / Supervisor for heavy machines worldwide

Excise, Service Tax & Sales Tax Work.

All aspects of mineral processing plant construction

Fluid Mechanics and Thermal Sciences

Multi Skill Engineer

Crew/dept. supervisor. Experienced heavy equipment operator

Maintenance experience.

Safety Management Diploma, Health and Safety at Work Certificate,Medic,Aviation,Military

Certified Instructor and Operator of all types of heavy equipment

Free! I have 28 years of production and reorganizing operations to maximize their production and maintenance.

Oil, Gas, Chemical, Water Treatment. Senior Project Mgr. Flow Measurement Specialist, Adult Education Instructor,Assessor, Competency Assessment System Construction & Audit, ISO9000,More than 35 years Experience throughout 52 countries

Skilled computer Technician/Technical Support/Trainer Especially Windows Office Suite

Exploration, Prospecting,Quality Control,Mapping,Surpac Mine Planning software, survey & Autocad

Dynamic, creative, and results-driven Materials Management Professional with a total over 18 years of experience.

Site manager, mechanical engineer, construction manager

Contract Administration, Cost Control, Project Control, Budget, Bid Qualification, RFP Preparation, Bid Evaluation, Pre-Qualification, Pre and Post Award, Insurance Qualification

Experienced Mining and Construction Supervisor, heavy equipment operator, driller, blaster, grade staker.

Free! Workshop management for the past 15 years of heavy equipment workshops inclusive of Caterpillar plant, heavy trucks , light vehicles, motorcycles, tractors and specialised agricultural equipment. Experience with external tyre contractor management and maintenance software programs.

Geologist Engineer: Abble to work as an exploration geologist, mining geologist, environmental geologist

As an, QC/ R&D Professional in Laboratory & Process areas with 17Yrs of Extensive experience in Plant operation, Chemical analysis by classical & instrumental methods in chemical, cement ,Ores , minerals, Ceramics Refractories & Metal industries ,wishing to work with the professional

I am currently working in an Offshore Vessel as an Electrician. I've worked experienced in Petro-Chemical Plant in Saudi & CHEVRON, Angola Africa as Maintenance Electrician. I am a Registered Master Electrician with PRC Licensed no. 0023265. I am currently looking for a job.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 [ 45 ] 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out