Resume - Looking For a full time position if possible in a mine, for Loader Operator, and...

Misco Jobs

Resume #3147

CONTACT INFORMATION:
View contact information...

QUALIFICATIONS
I have aprox. 10,000 plus Hours experience operating Propane Powered Forklifts that Lift to a Max of 9000lbs. Jobs Include, Loading and Unloading Carts for pressurized treating tanks. Loading and unloading flat Decks, and Vans. Loading and emptying as many as 4 Production lines at a time in confined spaces.
I Also Have aprox 5,000 Hours experience Of Operating a Diesel powered Wheel Loader that lift to a Max of 8000 lbs Job’s Include Loading and unloading flat deck trucks, Loading and Unloading Lumber Kilns, Unloading rail Cars. And move products from 4 foot Pickets, 8 - 16 foot Decking, 6 - 30 foot Posts and Barn Poles to 55 foot Hydro poles.
I Have Certification to operate both types of Loaders.

Treater Operating A Retort Tank for Pressure Treated wood, Job’s Include. Operating Treating Cylinder (100 feet long by approx 6 feet in diameter, at 150 p.s.i. when under pressure) Mix Chemical to Proper concentrations, Calculations on work sheets, chemical test to make sure chemical is the right concentration during pressure time. Take Samples of Product and do lab tests. Use two different Types of Chemicals. CCA, and ACQ

Red Cross First Aid & CPR Certificate

S. C. B. A. (Self Contained Breathing Apparatus) Trained

Electrical Lockout Procedures Trained

EDUCATION
1994 - High school Diploma
1995-97 Certificate in Theology, Central Pentecostal College, Saskatoon, SK

EMPLOYMENT
1995 - Present Prairie Forest Products LTD.
Laborer, Forklift/Loader Operator, Treater

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1501 to 1550 of 3126)

Go to Search Parameters...

Brief Description

Previous experience from education and industry have shown my main qualities to be concerned with time and data management which allows for consistent work that meets required deadlines. Other skills include good communication, presentation and team participation.

I am a fresh geologist from Belgium. I am looking for an interesting and challenging career in mining exploration. Fields of interest : Petrology, Geochemistry, Metallogeny, Sedimentology, Structural Geology, Geophysics and mining. From my studies, I also got rigour, autonomous, and dynamism

Wet Mill Crusher Mechanic Tech 3, 1.5 years experience,

I am a post graduate in Production engineering with over 18 years of experience in heavy earth moving equipment and auto vehicles

Worked as a geologic intern for both the government and private industry. Have experience in conducting own research projects in graduate school. Have a year experience in coal mine industry (underground).

Commercial driving skills, safety and first aid courses

Extensive environmental and mineral exploration experience in Mexico, Europe, Taiwan, and throughout the continental US. Supervision of assessments and reverse circulation drilling operations, as well as hands-on sampling, geologic mapping, and site preparation work. Bilingual

Environmental Management & Permitting/Mining - Oil & Gas - Power - Infrastructure - Construction/Domestic (USA) & International

Electrical Professional available prefer exploration camps and remote locations

Worked in all phases of the industrial plants. In commisioning, start up and debotlenecking. As a process engineer, with experiencie in process, production, facilities and process control systems. Supervised group of 12 people, implement ISO 9000/1400, Osha 18000, economic evaluations and management

§ Design and installation, repairs, overhauls, modifications and upgrades of all production and support equipment.§ Implementing maintenance excellence programs such as, maintenance planning, condition monitoring systems, safety, reliability and efficiency systems.§ Specification and contracting out

Recent graduate with a Diploma in Metallurgical Engineering with little experience and potential to be groomed to be a best metallurgist if given a chance, my scommunication skills, computer skills (AutoCAD, MS Office) also enhace my qualification,.

Cecil is a young talented individual who needs to be exposed to different worlds. He has completed a certificate in N6 Electrical Engineering; He was enrolled with the University of Witwatersrand Majoring in Bsc (Geology). He was with Global Geophysical an Exploration, Engineering & Environmental Ge

I am currently working as Camp Manager for a Canadian owned catering service at a mine which is owned by a foreign mining company. It is 250 man camp with both Russians and expats. I am responsible for all organization and management of kitchen, cleaning (including laundry) and maintenance personnel

iv been in mining for over 5 years operating a variety of machinery which includes pc1250 diggers , D9R&D9T dozers graders up to 16s moxy watercarts

Worked as mining foreman in steel authority of india limited. Job role : drilling and blasting, design of hole, dtection o noxious gases, underground support etc

I have several years of experience working in international trading (export and import), manufacturing, international shipping, and forwarding companies. During this time, I have obtained excellent knowledge of domestic and global logistics, and supply chain management.

Assembly & production engineer or supervisor of powertransmission equpment base company (Gear, IC engine, centrigugal pumps, compressors, etc)

Have a journeymen welding ticket with red seal and journeymen carpenter ticket, have extensive fabrication experience, maintenance experience in the shop and field, have worked on p&h shovels, all types of caterpillar equipment, have worked on surface open pit mines and underground hard rock mines.

My education is degree in Mining Engineering.

46 years international experience in EPC project management in oil, gas, power, petrochemical plants, refinery, iron and steel plants, mining, mineral processing plant and infrastructure design and construction. Activities include FEED to project delivery for greenfield and brownfield projects.

I have been in the Mining Industry for just over 8 years. I am a very dedicated hard working employee. I have underground mining experience in production, development and backfill.

Electrician with experience working in heavy mine equipment Komatsu/ Demag shovels and P&H drills. I hold a drivers license and run my own electrical company currently.

Licensed Land Surveyor 27 years experience

Mechanical Engineer

Millwright looking for a new career

ENVIRONMENTAL HEALTH & SAFETY COORDINATOR : 5 years on sites (petrochemicals, chemicals, car industry, nuclear, steel, water industry)

Diploma Geologist seeking entry position in exploration/production; specialized on economic/structural geology; surface/underground mapping, 3D modelling (South Africa); short courses on gold, platinum, diamonds, volcanic textures, ore microscopy; internship: phosphate mining industry (Jordan).

Looking For a full time position if possible in a mine, for Loader Operator, and perhaps work up to other equipment. Open Pit Mines preferred but will take any available

1. Company Name : PT. Java Gold Indonesia Title : Exploration Geologst Level : Senior Executive Specialization : Engineering/Technical Function : Assistant Project Manager Industry : Gold Mining Salary : USD. 500

Recent graduate with a Bachelor of Applied Science in Instrumentation seeking employment for supervisor positions within the instrumentation field or as an E & I Specialist.

Have sound understanding in Geology

project management.contract management,business management.

I am an ACI certified shotcrete nozzleman. I have experience as a shotcrete foreman for the biggest C710TBM tunnel in America. I am forklift and skid steer certified and ACPA certified. I have strong leadership skills and a strong work ethic.

I am a mining enginner with B.Tech degree & first class certificate of manager's competency, having work experience of 12 years in coal india ltd.

I am a boilermaker fabricator looking for work in mining. i would greatly appreciate it if any position ,any were in the world came up.

Underground fitter - Caterpillar ad40 ad45b 2900 2900g 1600g etc it12 it 18 it28g etc 12h graders, Atlas Copco rigs. M2d L6c 282 boomers etc.

Exavator operator

Supervisor Production/Fabrication/Engineering Quality Control/Inspector

Professional Electrical Engineer

I graduated with a Masters of Geology (2:1) from the University of Leicester in 2006. Since graduating I have worked as a drilling engineer in Oman and am currently working for the University of Leicester and the Diamond Trading Company and am producing a graduate certificate for them.

Professional Instrumentation Engineer, skilled in a variety of areas from estimation through to design completion, including instrument specifications, package unit control, DCS interface and design team liaison.

I hold a JD as well as an MBA in finance and have been a land manager for mining companies for the last 10 years. I am very well trained at acquisition, due diligence, negotiation, sales, entitlement, permitting and construction techiques. I have excellent references.

Mining, Exploration, Project Management

Mechanical Engineering Technician, MS Project, Premavera, Auto-CAD, SAP, Microstation, Planning , Maintenance

Business Analyst for some 15 years in the IT industry

An MBA graduate with a background in mechatronics engineering. Resident of Thailand and Australia.

Skilled in AutoCAD, Microstation, Survey Data Tech

Planning, Scheduling, Primavera, Artemis, Cost, Project Controls, Metrics, Construction Manager, Site Manager

Engineering, Manufacturing Engineering, Facilities and Maintenance Manager, Plant Manager

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 [ 31 ] 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out