Resume - Electrical Engineer with wireless, optical and integration expertise

Misco Jobs

Resume #32273

CONTACT INFORMATION:
View contact information...

CAREER RESUME
With significant technical expertise in Design, DSP, Wireless and in the optical data communication, I have also participated in the supervision, the development, the construction, the assembly and the repairs of a vast variety of products.
My prior working experience and studies are an indication of perseverance, hard work, and ability to contribute towards my employer. Strengths include self-motivated, self-management, communication, technical development skills, as well as leadership, vision, results orientated, and a high-energy approach to work and life.
Furthermore, I am always eager to learn new concepts, techniques and technologies that could improve my work.

RELATED WORK EXPERIENCE
System Integration Engineer, 2005-present
CDMA/1xEVDO R&D, Nortel Networks, Ottawa.
- Integration and validation of new 1xEVDO revA hardware board on existing system from prototype to customer ready.
- Activities include validation of signal integrity, protocol compliance requirement such as I2C, Ethernet, High Speed Serial Link, E1/T1.
- Support product integrity test and work closely with third party design group
- Perform Physical Layer Test on Forward and Reverse link traffic.

Optical Support Engineer, 2002-2005
OPTera Metro 3000 Series Global Network Product Support, Nortel Networks, Ottawa.
- Resolved technical product issues in optical customer networks by providing design-level expertise to support teams around the world.
- Enhanced Optical product quality by driving product and serviceability issues from customers into R&D community.
- Provided technical expertise on 100BT/Gigabit Ethernet, RPR ring, IP over Sonet, OC3 to OC192.

Research and Design Engineer, Master thesis. 2002-2005
Engineering faculty, University of Ottawa.
- Design and implementation of wireless smart sensor agents with FPGAs and microcontrollers platforms for pervasive intelligent monitoring system.
- Application of current solutions for wireless communication amongst robots and wire line network communication (data access point) with local intelligence and partial immersion of human-computer interaction into a robotic environment (real-time real-world robotic intelligence).
- Design of a Bluetooth driver component for a Nios processor for Altera Stratix Board. Real-time application running on a combination of MicroC uC/OS-II real-time kernel and the lightweight IP stack (lwIP).

Field Support Engineer, 2000-2002
New Product Deployment High Capacity, Nortel Networks, Ottawa.
- Optical network lab prime involved in: customer demos, staff training, and technical support for verification and field trials for final customer acceptance test.
- Development and test of various customer oriented procedures and troubleshooting guides.
- Improved optical link setup time by 50 % by implementing new deployment techniques.
- Issued recommendations for Quality Improvements and Customer Satisfaction through active participation in design reviews based on customer feedback.

1986-1997
Over this period, I worked with numerous industrial constructions firms with an increasing level of responsibility and authority. I accomplished various task related to supervision and project management.
I actively coordinated several maintenance shutdown repairs and supervised inspections carried out on process towers, furnaces, bundles, drums, tubes, reactors, heat exchangers and boilers.
I also dynamically participated on several small projects such as heavy piping/structural steel reparations or mechanical instrument installation. I performed many modifications and adjustments to insure drawings and specifications compliance for special requirements.

EDUCATION
M.A.Sc Electrical Engineering, Multi-data fusion and wireless intelligent agent sensor system. University of Ottawa, Ontario, Canada.(Ongoing)
B.A.Sc. Electrical Engineering, Telecommunication Major. University of Ottawa, Ontario, Canada.
Photonics (McGill University), ESD Awareness, Railroad Training, Hazardous products.
Mastering 1XEVD0 Rev0 and RevA

TECHNICAL SKILLS
Ability to assimilate new concepts very quickly.
Very confident in a laboratory environment
Self-motivated and capable of accomplishing tasks with minimal supervision.
Mechanical aptitude and manual dexterity.
Optical, wireless and data telecommunication extensive knowledge.
Sound knowledge of DSP, image processing, internet and internetworking, VLSI Design, analog and digital electronics, FPGAs and microcontrollers.
Strong knowledge of computer network design and electronic lab components including SONET, Wireless and Data test equipments.
Excellent technical writing.
Programming language: C/C++, VHDL, PERL.
Software: Matlab, Illustrator, Framemaker, Microsoft Office, Expect (Tcl), Altera MAX+Plus II, Quartus II, Synopsys Cocentric, Cadence.
Clarify, Primus, Exceed, Site Manager, TL1.

GRADUATE COURSES
Multimedia communications (QoS, Application, Protocol).
Image Processing and Image Communication.
Hardware and Software Codesign of Embedded System.
Advanced Digital Signal Processing.
Virtual Environment.
Machine Vision.
Robotic, Control, Sensing and Perception.

TEACHING
Teaching assistant for many undergraduate courses:
Electrical Engineering Design Project (Winter 2003, Fall 2003, Winter 2004).
Analysis and Design of Digital Systems VHDL (Fall 2002, Fall 2003).
Circuit theory (Fall 2002).
Computer architecture I (Fall 2002)
Mini-Enrichment Course on Robotics (Spring 2003, Spring 2004)
Introduction to Bluetooth for wireless multimedia applications
Introduction to Bluetooth for wireless virtual environment applications

PUBLICATIONS
Pascal Lyonnais (B.A.Sc.) and A.Al-Dhaher (Ph.D.), Analysis and Design of Digital Systems (VHDL), Lab manual, University of Ottawa. 86 p. Sept 2002.
Pascal Lyonnais (B.A.Sc.) and A.Al-Dhaher (Ph.D.), Computer Architecture I, Lab manual, University of Ottawa. 80 p. Sept 2002

MEMBERSHIP
Canadian Microelectronics Corporation (CMC)
Sensing and Modeling Research Laboratory (SMRLab)
IEEE

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2301 to 2350 of 3489)

Go to Search Parameters...

Brief Description

25 years Industrial Construction experience as a Construction Manager, Superintendent, Project Coordinator, Estimator and Maintenance Planner.

Project Management, Supply Chain Management, Human Resources Management

Looking for Instrumentation and controls job

Consultant, Control Risks; Formerly Country Manager, Nigeria, The Olive Group, Chief of Security, diamond mine Zimbabwe, corporate security manager, Riyadh, security manager KPC Indonesia, Graphtan Tanzania, 23 years in British Army Int Corps, Worldwide experience in military security operations.

Structural Steel Detailer, Tekla v15, Pro Steel v17 Auctocad 2008

I have 7 years experience of electrical installation onshore and offshore Oil / Gas Industry complemented with a 4-year recognized apprenticeship.

Fitter / Rig Mechanic. Overseas experience FIFO, All standard and preventative mechanical maintenance on all oil & gas rig systems, Please view attach resume. Thank you Regards Neil Hopper

Professional Land Surveyor

International Operations- Foreman, Diamond Driller, RC Driller, Long Hole Driller, Blaster etc.

Electrical Engineer and Computer Sciencer

Marine Operations, Shipping, Logistics, Port Management, Ship Agency, Representation in Ukraine at port of Berdyansk

Dear Sir, Attached please find my resume for the post of Cad Designer. I am a Mechanical Engineer and working with a leading Manufacturing company as a Cad Designer / Engineer.

SEEKING CHALENGING CARRER OPPURTUNITY IN MINING FEILD MINING EQUIPMENT,DRILLING WORKS WORK IN ANY PART OF WORLD 1ST CLASS DEGREE HOLDER DELT WITH SPONTANEOUS HEATING IN MINES

8 years of professional experience in Administration and personal assistance.

I am a qualified Metallurgy and Materials Engineer with international research and training experience. I am a person with strong organizational skills and am very confident in analyzing and solving problems with positive outcomes. My past studies in Metallurgy and Materials Technology and the resea

I am a qualified and experienced Medic or Paramedic and have vast HSE/Safety/OHS/QHSE experience and qualifications. I am also a qualified rescue technician and am very well versed in emergency co-ordinating.

Proficient in reading mechanical drawings and designing using Auto Cad, CATIA, NX-IDEAS.Strong Technical writing and presentation skills along with good hold in MS - Office.Master of Engineering (G.P.A - 10.33 out of 13)(2008- 2009)University of Windsor.

Summary of Qualifications: Proficient in this engineering software: 3D - PDS Equipment, Piping modeling/design,Isogen, SmartPlant Review, Microstation, AutoCad. Industries: Nuclear, Energy, Power, Petroleum / Refinery, Chemical, Logistics, Transportation, Manufacturing and Defense.

Civil/Structural/ Architectural Designer with extensive knowledge of petrochemical and oil and gas industry. Expertise in 3d Bentley Structural and knowledgeable in Staad Pro

Develop and Execute marketing strategies/plans by analyzing current business situations in order to meet group's business objectives and also to maintain and increase sales. (Advertising/PR/Events/Promotions/Exhibitions/Market research)

Geophysicist

Mechanical Engineer, technical support

Young haul truck driver eager to get back to work, trained on both articulated & rigied frame haul trucks.

Oil & Gas Exploration Project Manager - Spring Creek, Nevada resident - Forest Service, BLM , Tribal, State & Federal liason experience

Sales, Engineering Project Manager

I am Indian national working in Saudi Arabia as secretay, i have nearly around 4 years of experience in secretary,

Mining and geological engineer from the university of Liege with a specialization in geophysical methods and geotechnics.

ISO/ASNT certified Vibration analyst ,More than three years of engineering experience ,Analytical skills and self learning ability,committed to any work unconditionally,Able to work under pressure,Able to liaison between technical groups ,Proven ability to improve efficiency

I have 3 years experience in the Design industry. I self taught myself on AutoCad and Microstation.

Ellipse Business Analysis Skills in the Area of Asset Management, Work Management, Purchasing, Warehouse, Catalogue, and others.

Free! Varied and broad experience in construction, on/offshore projects, mechanical & piping, shipping, logistics, materials and QA-QC all mainly in the oil & gas industry for over 35 years. Countries worked: Eq/Guinea-Nigeria-Egypt-Ivory Coast-India-China-Canada-Spain-Holland-UAE-Oman-Qatar-Malaysia-Indo

Seeking Assignments with organisation of high repute in Mining industry. To be an effective member of a group of repute where I can share more knowledge and get an opportunity to develop myself.

25 years experience in Oil Field, Africa, Middle-East, and Asia

A Metallurgical Engineer with over 2 years of experience in Process management, Smelter Operations, Production planning, Quality Assurance. At present, associated with Sterlite Industries India Ltd, serving as Process Engineer- Primary Smelter with ISA smelt Technology. Expertise in handling the com

Experience in Instruments of PERKIN ELMER and applied bio-system, installation, commissioning, maintenance, and calibration of various instruments;

Electrical Engineer with wireless, optical and integration expertise

Electrical Engineer with previous hands-on experience in electrical and mechanical equipment maintenance

Academic Background:M.Sc.Tech. (1987), Applied Geology, Indian School of Mines, Dhanbad, India. Expertise: Engineering Geology and Rock Mechanics in the field of rock engineering

Purchaing, Procurment, Supply Chain Management, Materails, Inventory

I have worked as a chef in extreme conditions in the past. nothing i can't handle big or small jobs.

Mechanical/Manufacturing Engineering, Project/Program Management, Supply Chain Management

Load overburden, split coal, push in a shop

A grade electrical licence. Underground communications. Tamrock drill equipment service and fault finding, Flygt pump repairs and maintenance. Ability to read and draw schematics/wiring diagrams. HV switching. Primary/secondary ventilation. Commercial electrical installations. Duty desination.

PhD (Geology), Post MSc Diploma (Hydrogeology), MSc (Applied Geology). Working as GIS Professional and previously worked as Geologist, Lecturer in Environmental Science and GIS Professional.

Hard worker pursuing a career in the mining industry. Experienced in heavy equipment repair. Mechanical aptitude and willing to learn.

I am a mine engineer.

Technical/General English Instructor. Certified. BA and MA. Employed in field since 1988. Overseas experience in Middle East and Far East including oil and gas industry.

Computer Technician

Principal Environmental & Safety Consultant, oil, gas, mining & major projects; EIA, EMS, Environmental risk etc, climate change, HAZOP, HAZID, Safety managment etc experience. Relocating to Vancouver. Has right to live and work in Canada

Mechanical Engineering Graduate EIT - experience at underground mine sites, maintenance planning, drafting in autodesk inventor, physical asset management, underground mine hoist ropes and lubrication, scheduling

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 [ 47 ] 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out