Resume - Geology & Mining Engineering Degrees; Underground and Surface Experience; Profes...

Misco Jobs

Resume #34169

CONTACT INFORMATION:
View contact information...

SYNOPSIS OF EXPERIENCE

Worked for cmining consultants, major and junior mining companies.

* Reporting of resources/reserves according to NI 43-101
* Creation and maintenance of geologic resource block models, model updates, and resource estimation using Minesight, Vulcan and Gemcom.
* Mine geology (grade control, exploration and mapping) in underground and surface mines.
* Short term mine planning.
* Blast planning and design.
* Weekly and monthly mine and mill reconciliation.
* Precious metal and base metal exploration (grass root projects to definition drilling in existing mines).
* Consulting work in the diamond exploration field.
* Rock mechanics in convergence prone underground mines.
* Geotechnical ground and roof support investigations.

EDUCATION
1990 Master of Science: Geological Engineering, Emphasis: regional structural geology and tectonics, deformational history of mineral deposits, mineral exploration, fault related igneous activity University of Alaska, Fairbanks, School of Mineral Engineering, Department of Geological Engineering/ Mineral Exploration

1981 Bachelor: Mining Engineering, Emphasis: Rock mechanics, brittle deformation, underground road convergence, rock bursts Technische Fachhochschule Georg Agricola für Rohstoff, Energie und Umwelt zu Bochum, Germany,(University of Applied Science - Mining, Energy and Environmental Science, Bochum, Germany)

MEMBERSHIPS AND CERTIFICATIONS
Qualified Person after NI 43-101,
American Institute of Professional Geologists,
Professional Geologist registered with the State of Alaska,
BDG, Germany

RELEVANT WORK EXPERIENCE

07.07 – present Senior Mine Geologist (Chief Modeler)
Maintain and advance the computer model of a 40,000 ton/day open pit gold mine using MINESIGHT modeling software. Update the geologic model from ongoing exploration drilling. Develop pit optimizations using Lerchs-Grossmann or Floating Cone routines. Generate or update resource models of satellite ore deposits along the mineralization trend. Reconcile monthly production figures with the the exploration model, blasthole model, production numbers and reported mill tons and grades. Create resource and reserve figures for corporate end of year reporting.

02.06 – 06.07 Manager, Geotechnical Services
Modeling of Bullion River's underground narrow vein gold deposits using Vulcan resource modeling software. Prospects are former or current mines and projects of different development stages. Permitting oversight of mining operation

05.-05 – 02.06 Resource Engineer
Implementation of reconciliation procedures in this rehabilitated open pit gold mine. Block model set-up and maintenance including mine database administration. Aiding in general start-up procedures. Establishing short-term mine planning schedules. Designing of blast patterns. Conducting ore control with daily grade and tonnage tracking and mill reconciliation.

06.04 – 05.05 Quality Control Engineer
Identify ore/waste boundaries within blast patterns based on blast hole assays. Calculate bench grade and tonnage. Update block model using Gemcom. Identify and flag ore zones in the field for mucking activities. Collect grade control samples of muck faces, crusher belts and leach pads for reconciliation. Compile monthly grade control reports including drill progress, blast sequence, ore and waste tonnages mined, grade distribution of different rock types and reconciliation of actual, grade control and reserve models. Monthly royalty distribution preparation.

02.02 – 06.04 Project Engineer/Geologist
Plan and perform geotechnical assessments for foundation and construction design. Write proposals for projects of up to 2 million Euros. Participate in mergers and acquisitions (M&A) environmental Due Diligence Assessments (largest project: 400 sites worldwide to have been completed within six weeks). Increase the URS Deutschland mining exposure. Work on mining damage issues and mining subsidence problems. Evaluate risks of possible ground failure and other mining damage resulting from historical mining activities.

03.99 - 08.01 Engineering geologist
Create proposals for geo-engineering projects. Establish and track project budgets. Conduct soils investigations for foundation designs, geotechnical studies and PHASE I environmental assessments. Recommend foundation designs and construction procedures for investigated properties. Carry out fieldwork and write reports in timely fashion; correspond with governmental and regulatory agencies; research geological parameters and historical information for litigation procedures.
Inspect construction activities including earthworks, concrete and asphalt placement, shear wall construction, welding results and fire proofing activities. Operate drilling equipment (truck mounted CME55, cat-head A-frame and portable diamond drill) for soil and rock testing (diamond drilling and hollow/solid stem augering). Conduct split spoon sampling and penetrometer testing.
Supervise and conduct materials laboratory activities as concrete and asphalt testing, soil parameter determinations and nuclear density testing. Perform nuclear densometer field tests.

09.98 - 01.99 Contract geologist
The work location was the Greens Creek Mine in Alaska. A new portion of the ore body was to be explored by an intensified temporary underground drilling program. Work activities included logging of NQ core, MAXIBOR surveying of diamond drill holes, creation of X-sections based on logging observations, and database compilation for INGRESS and DATAMINE applications.

07.98 - 08.98 Consulting geologist
Duties consisted of an evaluation of a property in respect to possible diamond occurrences. Soil and stream samples were collected and analyzed for Diamond indicator minerals. Clay, likely derived from a kimberlitic source, yielded a number of chromites (high magnesium and chromium) known to be stable under diamond forming conditions. Potential exploration targets were generated and a follow-up program was outlined. The first diamond ever found in Alaska was collected on this property as reported on July 8, 2002.

08.96 - 04.98 Project exploration geologist
1997 Project geologist for exploration programs targeting base and precious metals on previously established mid stage projects (trench sampling and mapping) in eastern Alaska (Veta prospects in the Yukon-Tanana Upland) and in the copper belt of the Brooks Range (Wiseman). Additional early stage projects were initiated and consisted of soil grid sampling and geo traversing in Central Alaska (Tanana). Geologic settings of the exploration targets included massive sulfides, skarns and fault related mineralization.

1996 As the project geologist, I was responsible for the legal and geologic evaluation of potential claim staking targets in western Alaska (near Flat). Of about 20 investigated sites more than half were staked with a total claim surface of about 50 square miles. The geologic setting was mostly hornfelsed sediments in contact with igneous rocks of generally granitic composition. My duties included soil sampling, stream sediment sampling, and geologic traversing with the collection of geochemical samples and hand specimens.
The staking crew (staking targets subsequent to my prior field investigation), consisted of up to 12 claim stakers and one geologist. The area covered was about a third of a 1:250,000 Quadrangle. An additional staking phase restarted in the winter. This effort connected two previously staked larger claim blocks adjacent to Placer Domes Donlin Creek property.

04.95 - 06.96 Department head/senior geologist
Duties consisted of acquisition, project management and coordination of hazard evaluation programs in connection with soil contamination remediation activities. Projects were located predominantly on industrial or municipal properties, to a lesser extent on military real estate. Projects were equivalent to the US Phase I, II and III terminology. Larger clients were Esso and Shell.
After 09.95 Responsibilities increased to maintaining the profitability of the cost center (office) and included accounting, budgeting and bidding as well as personnel and equipment planning. Supervised three project geologists and one field crew.

08.92 - 03.95 Engineering/Environmental Geologist

08.92 - 09.94 Supervisor of the department of geology, material science and damage analysis (GMD). Planning and conductiong of all phases of hazardous indoor materials handling.
09.94 - 03.95 In addition to activities mentioned above, duties consisted of supervising the geological laboratory (XRD, SEM), and acting as a supervising consultant in a soil exchange program. (Budget of about $6 Million).

10.88 - 02.92
05.91 - 02.92 Senior geologist of the extended exploration drilling program and the development drilling program (total of 25,000'/ month) Planning of the drill program, its holes, staffing, financing, permitting, and environmental impact. Responsible for timely realization of the drilling program and for professional interpretation of the drill data. Supervisor of six geologists, three geo-technicians, two Greens Creek drill crews and five sub-contractor drill crews.

10.90 - 04.91 Geologist of the drilling program (3300'/ month) Extensive core logging and development of X-sections of the ore body for mine planning.

10.88 - 09.90 Grade control geologist/Mining geologist responsible for the quality control in a strongly deformed Massive Sulfide Deposit. Steering of the production face to warrant the highest ore grade. Underground sampling and mapping of the ore body. On-site evaluation of production drifts. Photographing of faces sampled. Entering face data into AutoCAD and digitizing photographic information. Working closely with the mining department and the laboratory. Scheduling the sequence of face visits with shifters.

06.88 - 10.88 Exploration geologist
Regional Juneau Gold Belt reconnaissance study in southeast Alaska with special emphasis on "gold mineralization in epithermal vein deposits". Collection of soil samples, steam sediments, pan concentrates as well as ore and bedrock samples of abandoned mines in the area.

08.82 - 05.84 Research assistant with the Mineral Industry Research Laboratory's (MIRL) Interior Project

Fieldwork consisted of reconnaissance exploration of the entire Circle Mining District. The region comprises an area of 600 square miles. Investigation methods included general mapping with advanced rock unit descriptions, stream sediment, rock and soil sampling. Specific emphasis was given to structural parameters in an attempt to understand the tectonic history of the district. Laboratory work included the pulping of rock samples for chemical analysis and the preparation of thin and polish sections. Investigate prepared specimens in reference to metamorphic mineral assemblages and associated metals. The study furthermore included the utilization of Atomic Absorption Spectrometry (AAS), and fluid inclusion research on quartz veins.

03.81 - 07.82 Mining engineer (only during semester breaks)

Scientific research in the department of rock mechanics/road support. Statistical evaluation of convergence properties in production drifts of the Ruhr area. Technical consultant for mining companies in the Ruhr area concerning drift support issues.

10.77 - 11.80 Underground coal miner (only during semester breaks)
Total of an additional ten months in drift development.

11.76 - 09.77 Underground coal miner
Training department: six months
Drift development: five months.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 551 to 600 of 3130)

Go to Search Parameters...

Brief Description

MSW with specialisation in Labour welfare & personnel Management with 68.3% marks

Toolmaker, Mechanical Design Draughtsman, Solidworks, Inventor, Autocad, Structural, Piping, Mining

Qualified electrician 1996

Exploration Geologist, Gold and Base metals

Nine years experienced and motivated open cut production/planning engineer to secure a position in a mining company with considerable advancement opportunities

Mechanical Engineer: 12 years experience in project management & administration of highly complex industrial projects. Design, estimation, planning, scheduling, inspections and expediting. Team builder with outstanding results in conflict handling, excellent overall program leadership.

Senior Executive with Board Experience

Seior EE in oil and gas field and plants, construction and consulting, power generation and distribution, switchgear and motor control centers, training and development. I hold Masters degrees, completed all phd courses at McMaster University: Hamilton, ON. Canada. Accepted as P.Eng. by PEO, Canada

Geology & Mining Engineering Degrees; Underground and Surface Experience; Professional Geologist; Qualified Person after NI 43-101; Vulcan, Minesight, Gemcom Experience

Mines Manager with intensive experience of Underground Mining Operations of Semi Mechanized nature.

Maintenance Planner

20 years of construction and equipment operator and house and equipment repair

Expert in presplit blasting techniques. valid UAEand Oman Blasting License.Experince of 2500 BLASTS. Worked with multinational companies.

Dragline Operator with 23+ years in the Bowen Basin

Jounyman Heavy Equipment Mechanic

I have a National Higher Diploma in Extraction Metallurgy and currently studying towards a BSc Hons in Metallurgy at the University of Pretoria. My current tasks involve plant optimisation, risk assessments, health, safety and quality, budgetting, compilation and reviewing of work instructions.

Geological engineer (Portugal & UK), MSc in Mine Planning. Considerable experience in teaching and training, data analysis and field surveying. Work experience in various geological environments (Portugal & Africa). Strong IT skills. Fluent in Portuguese, English, Spanish and French.

Senior Chemical Integrity Engineer

To secure supply position-involving procurement, contracts and logistics coordination where my skills may be fully applied overseas, Africa or domestic assignments

Technical mining management professional with proven success in surface mine engineering, environmental and operations searching for a position in Operations or General Management.

Safety system and Advance Safety Auditing

I did B.Sc (Mathematics), Diploma In Mine Surveying, and Advances In Mine Surveying Technology (Indian School of Mines) . I am Using SURPAC Software From last 14 (Fourteen) Years in U/G Mine as well as in Open Pit Mine.

Feasibility studies, Process Design & Consultation, process Development , Project Management, Electro-mechanical installation, Pre-Commissioning & Commissioning, Start – up & Operation of Industrial Projects

I have 17 years of working experience on road construction and mining both hard rock and alluvial

Electronic/Diesel Hydraulic/Controls Technical Writier with field and military experiance.

19 yrs of hard rock mining experience (ie: copper, gold) as well as diamond mining. Will adapt to most enviroments and willing to work overseas; will reply to all responses. Sincerley Stu Hogg

A middle management level professional having an experience of 13 years (6 years of Gulf experience) in the avenue of QA/QC in Industrial Construction

Training and trade testing of apprentices

28 years exploration experiance in Africa. Two companies Anglo American & Union Carbide. Worked in remote locations, overseeing all personal and financial matters, budget control, oversaw logistics of exploation camps, responsible for safety, health and enviroment issues, conducted training.

To work for a great company as a driller or an advisor/trainer in the mining field or similar:(Exploration or other). My experience with and knowledge of drill bits may be of significant value to your company if many of your drill bits fail prematurely from broken or missing carbides.

Experienced and degree Safety Engineer. Wish to utilize experience and skills to reduce accidents, eliminate and control hazards, lower Workers Comp costs, and develop a Safe Production Program that contributes as a Profit Center.

Over 12 years of experience as research and mining engineer with experience in coalmine excavation, mine safety control, old mining area remediation, and rock mechanics. As a software engineer of AutoCAD, MDT, and GIS.

Drill Foreman/Camp Super

Mechanical Training Specialist of Heavy Equipment

Controls Eng. Tech.

Geophysical Supervisor, logistics, drill,survey, sample supervision.

•Excellent abilities on using PLC to control the machine,and I have held the certificate of Siemens Training Center.

Chartered Accountant

Geological modelling, Vulcan expert user, JORC reporting Project management Quality control, reconciliation RC/diamond/environ drilling, remote exploration Tenement applications Contract/tender documents, capital justifications Traditional Owner liaison Training indigenous people (military)

Underground and surface mine development, construction and operations. Mechanical engineering background, involved in maintenance and efficiency studies of mining equipment including excavation and haulage systems. Overseas experience.

Electrical Engineer with experience in system design and maintenance planning of electrical facilities including motors, motor starters, switchgears, power distribution, and cabling.

PhD candidate with experience in Hardrock and Softrock

13+ years experience in GIS Specialist, domestic and international

I am a Qualified Geological Technician with Underground, open pit and rock mechanics skills and GIS skills. Software skills in Mapinfo, Target, Xplorpac, Vulcan, Datashed

Post of OccupationalTherapist Assistant

I am an Electrical Engineer who has experiences in P&H and Bucyrus Electric Shovel

Mining and Construction Heavy Equipment Operator Trainer

20 years overseas contracting, Mining and Construction

Well Experienced Human Resources Professional in Recruitment, Salary Administration, Writing of Job Writing, Employee Relation, Employee Record Administration, Leave Record, and Settlement

Mining experience 20 yrs. Leader in all facets of underground mining,stope drift and timber leader. Jumbo jackleg stoper, heavy equipment truck to 40 ton tamroc jumbo, common core, Ontario mining certificate, various safty certificates, mine rescue certificate.

First 1 2 3 4 5 6 7 8 9 10 11 [ 12 ] 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out