Resume - Piping Designer with Over 20 years experience within the Oil and Gas, Petro Chem...

Misco Jobs

Resume #36160

CONTACT INFORMATION:
View contact information...

Piping Designer with Over 20 years experience within the Oil and Gas, Petro Chemical, Refinery, Textile, Pharmaceutical and Nuclear Waste Industries

SKILLS SUMMARY:
* Supervisory experience performing as a section lead for a Waste Facility project which included estimating, scheduling, coordinating and technical design support
* 3D modeling of process piping experience spanning 4.5 years
* Worked closely with fabricators to develop skid units on Oil Separators, Water Skimmers, Regenerators etc. for companies such as Mobile, Shell, Kerr Mcgee, Burlington Resources, and Unocal
* Solid ability to design systems such as, Tank Farms, Offsite equipment and Refinery Units
* Keen experience utilizing Engineering Standards and Procedures
* Extensive field experience locating tie-ins, routing piping and setting equipment

COMPUTER SKILLS:
* CAD: Autocad v. 2000, v14, Microstation "J", Autoplant
* 3D CAD: PDS, Rebis, Plantspace, Enterprise Navigator (Viewer), Smart Plant Viewer
* Applications: Excel, MS Office
* Platforms: Windows

PROFESSIONAL EXPERIENCE:
Parson's E&C (Houston Texas) May 01 - Present
Principal Designer

* Field assignment in the Exxon Mobile plant Beaumont Texas.
* Locating pipe tie-ins
* Field routing off site piping in a refinery
* Field routing pipe in a Benzene unit.
* Assisting field crew with all pre-turnaround issues.
* Conducted safety presentations

G.A.S. Unlimited (Houston Texas) Mar 05 - April 28
Senior Piping Designer

* Layout and design of a Petrochemical Unit; design performed through the use of PDS software
* Responsible for an area containing Amine Pumps, Horizontal Drums, Filters, Tower, and Exchanger.
* Performed equipment layout and piping design.
* Conducted studies on piping flare

Bechtel National Inc. (Richland, WA) Oct 01 – Feb. 05
Sub-Lead Supervisor /Senior Piping Designer

* Estimating, scheduling, coordinating and support for a $5.5 billion project
* Layout and design of a Nuclear Waste Treatment plant; performed through the use of Plantspace software
* Experience obtained within the Pretreatment facility
* Participated in Model Reviews to verify piping design
* Some areas of design included outcell equipment, process vents, chill water, process cooling water, instrument service air and hydrogen mitigation systems.

Engineering Development Group (EDG) (Lafayette, LA) Apr 01 – Sep 01
Senior Piping Designer

* Layout and design of Offshore Process piping; piping modeling performed through the use of Autocad R14 & 2000, Rebis Auto Plant software
* Extensive fieldwork performed offshore to retrieve information involved in the design process
* Experience designing manifolds, separators, fuel gas scrubbers, skimmers etc., gas compressors
* $10k to $10 M upgrade, compliance and grassroots projects

TRS Jul 00 - Mar 01
Senior Piping Designer, Contracted to Fluor Daniel (South Carolina)

* Layout and design of pharmaceutical piping; piping modeling performed through the use of PDS software
* Layout involved design of 4 collection tanks and 2 transfer panels
* The piping partition included approximately 100 process, drain and utility lines
* Maintained P&ID's once they were assigned to the piping department

Office Of State Parks (Baton Rouge, LA) Oct 99 - Jul 00
Engineering Technical Design Specialist

* Performed as a technical writer for design and maintenance of existing facilities within La. State Parks
* Conducted and organized pre-bid meetings
* Inspected construction for ongoing projects
* Recorded and maintained records for project correspondence
* Designed facilities for cabins, trails, swimming pools, sewage treatment plants and camping areas

Pegasus International Inc. (Lafayette, LA) Jun 97 – Oct 99
CAD Operator

* Developed vessel drawings for fabrication
* Designed structural skids & platforms for oil & gas vessels
* Design was performed through the use of Autocad R12 windows software

NATCO (New Iberia, LA) Dec 96 – Jun 97
Senior Piping Designer

* Planning and design of offshore process vessels and skids
* Development of P&ID'S, piping plans, sections and details
* Developed Skid Units for Offshore Facilities with Autocad R12 Softeware

PREVIOUS EMPLOYMENT:
Drafting Supervisor, Wilcrest Engineering (Lafayette, La) Jul 95 – Dec 96
Drafter, Mc Dermott (Lafayette, LA) 1994 - 1995
Contract draftsman for McDermott engineering, Universal Technical Services (Kenner, LA) Jun 94 - Sep 94
Piping Designer, Jacobs Engineering (Baton Rouge, LA) Jan 94 - Apr 94
Piping Designer, Wilcrest Engineering (Lafayette, LA) 1993 – 1994
Piping Designer, Fluor Daniel (Greenville S.C.) 1989-1993

EDUCATION AND TRAINING:
B.S., Industrial Arts Education, University of Louisiana (Lafayette, LA) Company Sponsored Course-Phase III Piping and Equipment Layout Training
* Performance Based Leadership

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1601 to 1650 of 3438)

Go to Search Parameters...

Brief Description

Accomplished, Achievement-driven, Results Oriented and Passionate about realizing a challenging career that allows meaningful contribution to Metal/Manufacturing Industry .Had 3 years of primary aluminum production industry experience and recently graduated in material science and engineering

Class 6 Underground Coal Miner. Certified Welder. Certified structural steel welder. Skilled in rebuilding all types of machinery. Skilled in running all types of equipment.

Piping Design & Stress Engineer, Caesar II, Rohr II, PDMS, Auto Pipe

Radiation Safety Officer, Certified Health Physicist, Environmental Manager

Kimberlite Geologist / Angola / Portuguese speaking / 6 years experience / Planning, implementation and supervision of exploration activities.

15 years of dragline experience

Graduated from the University of Zambia in 1996 with a bachelor's degree in Metallurgy & Mineral Processing. Six years experience in the mining industry. Worked as a Production Operator for 1 year 4 months, 7 months as a Production Foreman. Worked as a Metallurgist for 4 years.

PROFILE: A self-motivated and hard working Geologist with experience in Mining and Exploration of gems, precious metal and industrial metals. A capable leader, able to use own initiative and work as part of a team.

Well rounded journeyman electrician looking for industrial, commercial or residential position. Experienced with supervising apprentices and other jw's.

Smart, skilled and experienced, electrical/ mechanical available for camp/ remote locations ( extreme camping)

I have been in mine maintenance for over 20 years, the last 9 as an expat in various countries around the world. I'm a very positive and progressive thinker who adapts to changes and adversties with little fuss. I like to succeed in everything I set out to do

Piping Designer with Over 20 years experience within the Oil and Gas, Petro Chemical, Refinery, Textile, Pharmaceutical and Nuclear Waste Industries

„XRepaired Haul Truck s and Crawlers,„X Repaired Equipment, „XWorked as a field Tech, Operated Forklift ,Diesel Mechanic Intern

Young academically accomplished geotechnical engineer, practical experience in the mining industry both domestic and overseas.

Knowledge of Hydrotreating & Hydrocracking, Catalytic Cracking, Distillation and Amine plants. Knowledge of Process simulation (HYSYS, ASPEN Plus, PRO II and HTRI), PFD, P&ID, Flare and Relief systems, LDT, Hydraulic calculation, HAZOP review, Equipment sizing, TBE, DPDT and process data sheet

Crane operator

Obtenir un emploi dans une entreprise dynamique qui me permettra d’évoluer en utilisant mes connaissances et mes aptitudes et dans laquelle il existe des possibilités d’avancement. Face à un nouvel emploi, je recherche la stabilité, diversité et je désire relever des défis

25 years as a cook or manger in the food service operations

Diamond and RC Driller

I have over twenty years pipefitting experience. Most of this experience has been in industrial chemical and paper processing. Five years of this experience has been as an foreman. I have used computers for report writing, maintaining records and numerous other tasks, have worked internationally.

Entry level geologist

I have experience in the following operations - excavation, ditching, levelling, hammering, drilling, charging, blasting, scaling, timbering, mucking, rock bolting, hauling, shot crating and concreting, steel set installation.

Bachelor degree of computer science and Seeking a challenging position, where my technical and communicational skills can be utilized and developed in field of software or quality assurance

Career Objective

Entry Level Mining Engineer

Mining Engineer Seeking employment in the mining industry that will allow career growth and the opportunity for advancement.

I am ready to work for the best of the company and my experience

Geological Engineer, mapping, petrography, reserve estimates, exploration, mining, import/export, well drilling, GPS, logging, geoframe, geographix, excellent vocational English, MS Office, MBA in Business Administration, Experience in Marketing

I am a recent Master of Business Administration graduate with a concentration in finance and a background in the mining industry. I am currently looking for a finance position with a mining or resource company. I plan to pursue an accounting designation and would welcome the opportunity to relocate.

I am looking for overseas work in the mining industry. I have seven years exp. in a wide variety underground operations.

Masters student in Materials Science and Engineering with BS in Applied Physics seeking engineering related position after graduation in Spring 2002.

FIELD OF SPECIALISATION (a) Design of method of extraction of pillars and their stability. (b) Design of support system for coal mines. (c) Multiple-seam coal mining. (d) Strata behaviour in Blasting Gallery method. (e) Design of supports and strata behaviour in Hydel Power Projects.

Process Engineer Graduated with a First Class from the University of Leeds 3-4 years experience of production, technical, commissioning and project management

Production Drilling and Blasting. Over 20 years experience in production mining, open cut and underground, Aust and Africa

Engineer with practical business, design and management experience in the areas of Civil and Geotechnical Engineering. Educated professional, committed to continuous improvement, ethics, teamwork and quality service. Detail oriented, excellent communicator, and capable of managing multiple projects

I am having more than 16 years experience in secretarial field, out of which 8 years in U.A.E. only.

Mineral Processing Engineer(16 yrs exp.)10 yrs as mill sup't in Cu,Zn,Au,Ag operations. Personnal traits: team leader, flexible, resourceful, team-oriented, good communicator. Skills: technical & managerial aspects of planning, operation, projects, budget, processes, training, HSE

I have completed my graduation with microbiology subject and also completed my laboratory technician course from government hospital.

To obtain Position in Project Management or Project Engineering in an International Environment

PROJECT GEOLOGIST with 19 years experience in Environmental Consulting including soil and groundwater investigations and site remediation, and Oil and Gas Exploration.

I am a self motivated and ambitious Tanzanian holding a Bachelar of Science Degree in mining engineering who can work under pressure. I have got the basic skills in computer and user of Vulcan software.

I am very keen to work outdoors and have a great love of the West Australian outback. Therefore I am keen to work as a Haul Truck Driver and progress from there.

To be a part of organization which enables me to cope-up with emerging as well as the latest trends and provide me scope for widening the spectrum of my knowledge.

Over 6+ years experience in Content Management. Professional Proofreading, Editing, Writing, Documentation using various editing tools as Framemaker, Latex, MS-Word.

LSIT, US Citizen, Willing to relocate

A highly qualified Materials Engineering Graduate, with extensive technical, inter-personal, analytical, and troubleshooting skills, seeks a challenging and exciting engineering position

15+ years of heavy equipment experience on all sizes and pieces of equipment

Twenty+ years of Materials and Procurement Management experience including supervision and management of warehouse contractors, material control, procurement activities including vendor sourcing, requisitioning, procurement and expediting, warehousing including receiving and issuing.

Repair, replace parts, maintain equipment.

My major responsibilities are Core Photography, Core Slabbing ,Core reservation and Storage Services ,Lithology rock description ,Real time monitoring of drilling parameters, preparation of formation evaluation logs, identification and classification of samples

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 [ 33 ] 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out