Resume - Master of Science in Mining Geotechnics, Middle Rank Mine Ventilation Supervisor...

Misco Jobs

Resume #40364

CONTACT INFORMATION:
View contact information...

EDUCATION:
* 1997-2002 Stanislaw Staszic University of Mining and Metallurgy (AGH) in Cracow, Faculty of Mining, higher education studies in the field of Mining and Geology, specialization of Mining Geotechnics, Academic degree: Master of Science, Dissertation/thesis subject: Influence of coal extraction from coal seam number 510 in coal-mine Wesola to galleries of coal-mine Staszic
* 1992-97 J.Kustron Secondary school in Nowy Sacz, high school profile: electronics

WORK EXPERIENCE:
* April – May 1995
The Railroad Repair Enterprise in Nowy Sacz (now it's: NEWAG S.A.)
Position: Trainee
* April – May 1996
Polish Telecommunication S.A., Fixed-line Service in Nowy Sacz
Position: Trainee
* July 1998
The Sadecki Aggregate Exploitation Enterprise in Nowy Sacz (SZEK S.A.)
Position: Trainee
* July – September 2000 - 2002
"Osterloh" Strawberry Farm, Halter, Visbek, Germany
Position: worker on the farm
* June 2002
coal-mine Piast (deep mine)
Position: Trainee

* March 2002
coal-mine Staszic (deep mine)
Position: Trainee
* March 2003 - February 2004
working at coal-mine Budryk Joint-Stock Company (deep mine) for The Mines Methane Drainage Enterprise "ZOK", Ltd.,
Position: March 2003 – October 2003 - Trainee
Position: November 2003 – February 2004 - Lower Rank Mine Ventilation Supervisor and Lower Rank Drilling Supervisor
* March 2004 – actual working at coal-mine Budryk Joint-Stock Company for The Specialistic Mining Works Enterprise "ZSRG'', Ltd. (address: "ZSRG" Sp. z o.o., 44-203 Rybnik, Brzeziñska 8a, Poland, ph. 0048 32 434 00 82)
Position: March 2004 – September 2004 - Lower Rank Mine Ventilation Supervisor and Lower Rank Drilling Supervisor
Position: September 2004 – February 2005 - Middle Rank Mine Ventilation Supervisor and Middle Rank Drilling Supervisor
Position: March 2005 - actual – Assistant Manager at the Department of Degasification
Responsibilities: degasification at each stage of its activity; operation and maintenance of degasification equipment; assembly of methane pipelines (steel an laminate pipes) with full equipment for measurements, cutting off, dewatering; underground drilling works for methane drainage, geological boreholes, exploratory boreholes with full recovery of core; drilling works under conditions of methane hazard, breakout hazards, water inflow hazards, bounce hazards. As an Assistant Manager I am also responsible for the safety, planning, cost control, project management, labour control and overall operations of the Department of Degasification at coal-mine Budryk Joint-Stock Company.

FOREIGN LANGUAGES:
* Polish– native
* English – fair (in speaking and writing)
* Russian – basic

QUALIFICATIONS AND SKILLS:
IT Skills:
* MS Office: World, Excel, Power Point; Graphical programmes: CorelDRAW, AUTOCAD, PhotoShop; Internet programmes: Internet Explorer; Other programmes: Surfer, Grapher, Flac;

Other skills:
* Driving licence – since 1995

ADDITIONAL INFORMATION:
* Interested in travelling, mountain hiking.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1101 to 1150 of 3130)

Go to Search Parameters...

Brief Description

I have mining experience as an engineer and as a miner, in both domestic and international environments. I hope to establish roots writing a mining company starting with a junior engineer's positions.

Highly motivated, team-oriented individual with excellent communication skills. Two years of industry experience with Turner Construction-USA & NESPAK-Pakistan respectively. Prepared budget reports, schedules, estimates and bill of quantities and performed engineering supervision of various trades.

A highly experienced and motivated mine surveyor. Specified mine surveying and mine modeling.

Finishing my MS degree in Geology and looking for a career. I am willing to travel and/or relocate. I am able to work in the US, Europe, and Canada, although I could move anywhere.

Onshore drilling HSE Advisor

i am a surveyor who qualified from a 4 year degree course.i specialised in mine surveying .i am conversant with survey softwares such as surpac,autocad.

BE Metallurgy passed out in 2005. 2 years of experince in QC steel maling, heat treatment.

8 years of experience in drilling and blasting field. Certified Blaster ISEE level 2. Has Homeland Security Clearences. Has worked in open pit mines, quarries, contruction.Can run up to 10 different drills. Willing to relocate overseas

I am a eager person with 12years diamond mining experience at present I am the production supervisor and my role entails meeting set targets of carats, mining rate and square meters. I run a department of 12 people, and is responsible for educating them with the marine and safety laws.

Environmental Engineer/Scientist with over thirty years of experience with project and program management, industrial hygiene, hazardous waste and material management, modeling, monitoring, regulations, risk and technology assessment, pollution control, and environmental remediation

fitter /pumpman /operator/maintainer of plant at powerstation /just worked in kuwait as mechanic for us military

I am a Heavy equipment operator /crusher mechanic/welder, I am looking for a better employment.

Experienced Safety manager in Contruction and through Mining/Oil/Gas. Safety Professional through design and planning to construction/commissioning, turn-key.

I am open pit mining technician with experience in drill and blast, load and haul and pit services. I have worked for both precious metal (gold) and base metal operation(chrome) in senior positions.

Having a long-lasting interest in mineralogy, I am willing to find a job that will allow me to use and expand my knowledge and analytical skills in the field of mineral exploration.

Graduate Research Assistant, University of Nevada, Reno (Jan 2004-present)

14 years Open cut mining experience with various makes and models of Earthmoving Machinery, 12 months experience over seas as an Expate in Africa. Currently in a supervisory role looking after field service personnel and workshop personnel.

Rig electrician/ technician

dip. in mining engineering

I am Mining Engineer specialised in Driilling & Blasting

Lewis Groves, British, City and Guilds Level 3 motor vehicle mechaics, 7 years experience within the motor trade, presently working in east timor on heavy vehicles and equipment, cranes, trucks, earth moving equipment, forklifts and diesel generators.

Free! An international, multi-lingual, technically proficient Sales & Marketing professional

Mining Engineer degree with 1 year of experience, excellent communication, leadership, and problem solving skills

BSC Chemistry

Senior management consultant with 15+ years of progressive experience and with a results-driven approach for project and program management, including the use of first-rate skills in directing full cycles for high profile, multisite, international programs and initiatives.

16 years in Planning/Scheduling/Project Controls for Power/Waste Water/Mining & Metals/Oil, Gas and Petrochemicals projects from concept to commissioning, particularly in multinational, multi cultural and consortium environment in India, Indonesia, Saudi Arabia, USA, Singapore, Bahrain and Canada

Experience on Machinery

I have worked as Pit Supervisor,MMFMS Dispatcher,Hold valid driving licence,Fluent in Engilish.

Licensed Mining Engineer

I have vast experience in Quarry management of granite stone, crushers also hot asphalt manufacturing, road building, drilling & blasting. I also have broad technical knowledge.

Time served apprentice trained mechanical fitter, with experience of large fixed plant in quarries, factories, foundries and cement plants

Underground Miner for Barrick Bullfrog and Mine Resque Team Member

Trade test as fitter with a flameproof certificate,gas testing certificate.hazard identification for supervisorsand a first aid certificate.

B E Mechanical Having 10 plus years of experience in Manufacturung, Production, Maintenance, Installation & commissioning, Inspection & Testing of CDP Fabricated Parts of Industrial M/c.

I am a underground miner with 11 years experience. I have ran jumbos(single boom and double boom), I run lhd's, jacklegs, slushers, haul trucks and loci's. I have helped diamond drillers, prepped for sand, and just about everytning job you can think of that is associated with underground mining.

Experienced procurement Officer,First degree,Bussiness administration in procurement and Logistics management having analysis skills.

Mine surveyor for 2 year experience in open cut, graduate in BSc in Geomatics, working in project, exprolation, production, slope stability monotoring

Dynamic, results-oriented Sales Management professional with 20 years of experience leading complex programs and initiatives encompassing International Business, Business Development, Distributor Network Startup, and New Market Penetration among others.

Master of Science in Mining Geotechnics, Middle Rank Mine Ventilation Supervisor and Middle Rank Drilling Supervisor, Assistant Manager at the Department of Degasification

I have over 30 years of heavy equipment experience, including Dragline, dozer, loader, scraper, etc.

Computer & Planning in Mining

A self motivated metallurgist who is presently working with Ispat Metallics India Ltd (Ispat Group) as Sr. Engineer production, has wide range of experience in commissioning and Operations including excellent exposure to Level 2 models, wishing to pursue his career in an environment where his techni

ailure Analysis: Analyze equipments breakdown, identify root cause of failure and prepare accurate failure analysis reports. Provide accurate failure analysis report for customer and equipment manager.

I am a well rounded geologist and am excited about applying my skills, as well as learn new ones, to the benefit of myself and my company. My MS is in structure and mineralogy from UNC Chapel Hill and my BS from SUNY Binghamton in geology with a concentration in geophysics as well as geomorphology.

M.Tech MINERAL EXPLORATION First with Distinction ISM DHANBAD P.G.D.E.M ENVIRONMENTAL MANAGEMENT A.U WALTAIR

Mechanic with 14 years experience ranging from draglines loaders and shovels to haul trucks and over the road trucks. Also including welding skills, as well as proficient with hydraulic and electrical schematics.

Fresh Graduate Mining Engineer Looking for A Job In Mining Industry.

I passed BE ( Electrical ) in 2002 and passed Graduate diploma in Electrical power from UniSA, Adelaide.

24 years experience in the printing industry with over 15 years in supervising,managing.

Equipment operation and management

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 [ 23 ] 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out