Resume - Mechanical Engineer, Project Engineer and Project Management Services

Misco Jobs

Resume #40809

CONTACT INFORMATION:
View contact information...

OJECTIVE:
There is a will, there is a way. For every job and company, my expecting is to be a Professional Engineer, learn and to do more also get better benefits.

EDUCATIONAL:
1986 - 1991 Brawijaya University
Malang, Jawa Timur
Mechanical Engineering Department
BS., Mechanical Engineering

PROFESSIONAL EXPERIENCES:
1992 - 1993 PT. Indogasraya Utama (PT. Samator Group)
Semarang, Jawa Tengah
Staff of Production and Maintenance Section

1993 - 2003 PT. Boma Bisma Indra
Surabaya, Jawa Timur
Staff of Technology Directorate PT BBI
- Mechanical Engineer - Balance of Plant Section
Staff of Project Management and Services Division PT. BBI
- Mechanical Engineer - Engineering Services Section

2003 - Present PT. Cemara Siko Engineering Indonesia
Jakarta
Senior Mechanical Engineer - Engineering Department

WORK EXPERIENCES:
1992 - 1993 PT. Indogasraya Utama (PT. Samator Group), Staff of Production and Maintenance Section.
Responsibilities:
- Processing of liquefied gas: oxygen, nitrogen and argon
- Maintenance of gas equipment and cryogenic equipment
- Design of piping gas distribution system and preparation bill of quantity.

1994 PT. BBI, Member of Engineering team for Belawan Combined Cycle Power Plant Block II project.
Responsibilities:
- Design of piping isometric and pipe supports.

1994 - 1995 PT. BBI, Member of Commissioning team for Belawan Combined Cycle Power Plant Block II project.
Responsibilities:
- Commissioning of Gas Turbine forced cooling system and Gas turbine lube cooling system.
- Commissioning of Fuel oil and Fuel gas supply system.
- Commissioning of Desalination Plant and Service water system.
- Commissioning of Demineralized water system and Boiler feed water system.
- Commissioning of Condensate water system and Circulating water system.
- Commissioning of Condenser tube cleaning system and Closed cooling water system.

1996 - 1997 Member of Engineering team for mechanical design of pressure vessels and heat exchangers.
Responsibilities:
- Preparation of Strength calculation and Bill quantity of material of pressure vessels and heat exchangers for bidding.
- Mechanical design of pressure vessels for TPPC project.
- Mechanical design of pressure vessel for Smelter cooper project.
- Preparation Mechanical design of HE for Cilacap Debottlenecking project.
- Preparation of plant lay outing and bill quantity of material for bidding.

1997 - 1998 PT. BBI, Member of Engineering team BBI - BPIS for BOP Term of reference project TA. 1997 / 1998.
Responsibilities:
- Engineering coordinator of mechanical design of circulating water system.
- Mechanical design of circulating water piping.

1998 - 1999 PT. BBI, Member of Engineering team BBI - BATAN for RUT VI.
Responsibilities:
- Design, research and development of small condenser 1 MW capacity.
- Preparation thermal calculation of small condenser 1 MW capacity.

1999 - 2000 PT. BBI, Member of Technology development team for Transfer of Technology CPO Mill design.
Responsibilities:
- Transfer of Technology for Overall Design of CPO mill 30 MT / hr capacity.
- Thermal analysis of CPO mill equipment ( Sterilizer, Clarifier etc ).
- Heat and Mass balance analysis of CPO mill 30 MT / hr capacity.
- Mechanical design for CPO Mill capacity 10 MT/ hr extendable to 30 MT / hr, Trumon, Project.

2000 - 2001 PT. BBI, Mechanical Engineer for CPO Mill PT. SAL-2 Jambi Project
Responsibilities:
- Leader of Mechanical design PT. BBI for Extension Works of CPO Mill 30MT/hr extendable to 60MT/hr,PT.SAL-2 Project.
- Preparation plant arrangement, Equipment design and preparation equipment specification.
- Site Engineer for CPO Mill PT. SAL - 2 Project
- Responsibilities:
- To provide instruction sheet and supervise during modification and installation of equipment CPO Mill30MT/hr extendable to 60MT/hr,PT.SAL-2 Project.

2001 - 2002 PT. BBI, Mechanical Engineer for CPO Mill PT. KLS Project.
Responsibilities:
- Leader of Mechanical design for CPO Mill capacity 30 MT/ hr extendable to 60 MT / hr, PT. KLS Project and preparation equipment technical specifications.

2002 - 2003 PT. BBI, Engineering Manager for Turnkey project of JSPO Palm oil mill 90 Ton FFB / hr capacity.
Responsibilities:
- To coordinate all engineering activities such as prepare engineering drawing, Technical specifications, bill of quantity etc.

2003 - 2004 PT. Cemara Siko Engineering Indonesia, Mechanical Engineer for RioTuba Nickel HPP Project, PT. MAP Indonesia and PT SMU Project
Responsibilities:
- Mechanical design for shake out machine.
- Mechanical design for rotary kiln, and piping system.
- Supervising Fabrication of RioTuba Equipments: Hopper, Belt conveyors, Shake out machine.
- Supervising Fabrication of PT SMU Equipments: retort dryer and roasting kiln.

2004 - 2005 PT. Cemara Siko Engineering Indonesia, Mechanical Engineer for Fe-Ni Smelting Plant N0.3 Pomalaa Project.
Responsibilities:
- Mechanical Design of Material Handling System: Belt Feeder, Belt Conveyor, Shuttle Conveyor.
- Supervising Fabrication of Material Handling Equipments: Belt Feeder, Belt Conveyor, Shuttle Conveyor.
- Supervising Fabrication of Hot air generator, water cooling system for furnace.

2005 PT. Cemara Siko Engineering Indonesia, Fabrication Manager for SAK II Poject, Sinapore.
Responsibilities:
- To coordinate and planning fabrication drum and vessel, progress control, to arrange and inspection between client and vendor.

PT. Cemara Siko Engineering Indonesia, Engineering Manager for Komatsu foundry expansion project.
Responsibilities:
- To coordinate Engineering documentation, provide bill of quantity and to expedite technical communication with vendor.

PT. Cemara Siko Engineering Indonesia, Site Engineer for Komatsu foundry expansion project.
Responsibilities:
- Supervising Fabrication of dust collecting system, installation of dust collecting system and furnace system.

2005 - Present PT. Cemara Siko Engineering Indonesia, Mechanical Engineer for:
- Preparation of Cost Estimation for ITC Alumina calcining Plant project.

- Preparation of Cost Estimation for hydrant piping system PT TEL pulp and paper.

- Preparation of Cost Estimation for Incinerators equipment Yuasa Industries Co, Ltd.

- Preparation of strength calculation for thickener of Aluminum Hydroxide Plant Project, Korea General Chemical Corporation.

ACHIEVEMENT / TRAINING:
1995 Certificate of merit from Sobelco SA, Management site, Belawan, North Sumatra.
- Mechanical Commissioning Engineer PT. BBI.

1997 DJLPE - IWPL Training
Training for piping and equipment design and lay outing.
- Piping and equipment lay outing for power plant, calculation and material selection of piping for power plant.

1999 AOTS - ALTP Training
Training for equipment design improvement
- Design of HP and LP Heat exchanger for Power plant.

2000 CSIPMS Training
Training for CPO Mill design.
- Overall design of CPO mill, Heat and mass balance, Thermal calculation of cpo mill equipment, lay outing and calculation of effluent treatment plant.

2004 PT. Cemara Siko Engineering Indonesia Tokyo Branch Office, Transfer of Technology Program for equipment of Fe-Ni project.

EXPERTISE AND COMPETENCES:

Computer application:
- MS Office
- HTFS D301 for Mechanical design of heat exchangers
- HTFS D301 for Thermal design of heat exchangers.
- CAE pipe ver 3.7 rev.1 for pipe strength calculation and stress analysis.
- Autoplant R5.0 for plant lay outing design.

Mechanical Engineering:
- Mechanical design of heat exchangers according to TEMA Standard.
- Mechanical design of pressure vessels according to ASME Code.
- Mechanical design of Belt Feeder, Belt Conveyor and Shuttle Conveyor.
- Project Engineer.

Languages:
- Indonesia
- English

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2151 to 2200 of 3443)

Go to Search Parameters...

Brief Description

University graduate with over 6 years of expirience in surveying and geomatics, both in the field and in the office.

technical translation (Russian, English), document control

I'm qualified to work underground with my underground hard-rock common core, i am also qualified to work as a Registered Practical Nurse.

Mechanical Maintenance of Refinery, petrochemical and Mining Equipments [Static n Rotary]

Over 20 years experience as Project / Construction Manager on overseas assignments. Extensive experience in pipe design, fabrication and inspection of refineries, LNG plants, chemical plants, power plants, pipelines and mining facilities. After college, started a career as a craft pipe fitter in Hou

Microstation & AutoCAD, Photography, Energy Managment, Mechanical Engineering Technician, Teaching English as a Foreign Language

14 years of diversified project management and controls experience (EPC) in the oil and gas industry (up and down stream). Assignments include: Project Manager, Project Controls Manager, Lead Scheduler, and Lead Cost.

Heavy Lift Manager

I have a degree in Mining Engineering from Southern Illinois University. I have worked one mining engineering internship.

worked in the Middle east on Power plants for 2 and a half years, stat generator sets

Journeyman Millwright (Industrial Mechanic) 4 years overseas at a high altitude gold mine. 6 years working in various industries in western Canada. 36 years old.

Seeking graduate mining engineering position 2004. Have open pit gold experience. Seeking underground time.

I want to be widely active in the wide variety of Applied research project dealing into Environmental Geology, hydrogeology, GIS.

Geotechnical Engineer, foundation settlements, reclamation, interpretative and factual report writing

Broad and diverse drilling experience with specific in-depth knowledge of Tamrock DK-75 & DK-95 Double Pass, B&E series 49R Electric, P&H 1200 Electric, Atlas Capco 271 & 351 Pit Viper, and Atlas Capco Rock-8 Pre Split Drill.

I'm a Personal assistant to the director, have completed the following: Diploma in Public Relations, Diploma in Business English and current doing a Diploma in Finance Management.

Project Manager or Owner Representative. Over 25 years of experience in Industrial Instrumentation and Controls (I&C) engineering, construction, commissioning, start-up, operations, maintenance and training in a variety of industries. Project Management Professional (PMP) Certification #1200696.

I can ensure the Run of Mine (ROM) and plant performance are optimal, quality production,Expertise in operation of HEMM. Drilling and Blasting.

Over three years of experience in the application of earth science engineer expertise in the areas of Geomechanics, computer modeling using finite element modeling tools, site stabilization, expansive soils evaluation and treatment, soil/rock mechanics laboratory testing including procedures, quali

Heavy Duty Mechanic

I am a HSE Professional with more than 6 years experience covering construction, mining, manufacturing and petrochemical.

Due diligence, metallurgical audits and technical reviews. Simulation – based optimization of metallurgical processes. Project evaluations, feasibility studies, sensitivity and risk analysis. Metallurgical testwork program reviews. Multivariate and nonlinear statistical analysis.

cool,hardworking,highly flexible

Energetic Maintenance Manager seeking employment out side Africa, I’m Self Motivated Self Disciplined and have Extensive Experience in Managing Large Opencast Mining Fleet and Large numbers of Work Force

Warehouse/Supply Management,/Logistics co-ordination and purchasing skills.

Condition Monitoring Technician - Vibration Analyst Cat III (ISO 18436.2 2008) 15 years experience. CSI and Bently VA products, Fixture and Pruftechnic Alignment experience, Flir Infra red camera experience. Mechanical Commissioning Supervisor - Nickel project 10 months)

I am a post graduate(M. Tech.) in engineering from IIT delhi, recently worked with Qatar Drillcon WLL as site engineer in microtunneling works with AVN 800 B Tunnelling Machine.

Experienced underground Miner I, with six years underground experience. Seeking mining job preferably in Alaska, but will consider other areas.

I am looking for an entry level position in the mining industry. I graduate in December of 2002 with mining degree with a quarrying emphasis from the University of Missouri-Rolla.

jobs wanted anywhere salary as per qualification fresher branch=EEE

I'm looking for a long term employment with retirment and medical

Chemical Engineer seeking internship/future employment

Need a welder?

More than 30 years experience in the field of General Engineering, Plant Maintenance Management, Project Management, Telecommunications, Electrical/Instrumentation and Process Control.

Mechanical Engineer, Project Engineer and Project Management Services

I’m a good communicator who is able to work in a team and can handle pressure. . I am also willing to relocate, work over-time, after hours or/and be on stand-by if and when necessary.

Exploration Geologist

An experienced engineering manager, project manager, and program manager with Department and Division operations experience at engineering and construction, and consulting firms. Experience in multi-disciplinary infrastructure projects and environmental remediation.

Constructional Blasting, Quarry work, Coal Mines

Proficient with Leica RTK GPS, Total Stations & survey specific computer programs; Microsurvey, Autodesk Land Desktop, Leica Geo Office & Excel. Experienced pipe line & fibre optic locator.

Blueprint reading ,Hydraulics,Sheet metal layout, fabrication,Mig, Arc, Gas Welding,3-phase electric motors, Underground explosives

Intermediate Mining Engineer with several years of practical underground metals mining experience.

Safety Officer/Adviser. Cert IV OHS level, Cert IV Training & Assesment. Qld WHSO accredited. 5 years experience - resource, retail industries. Hands on proactive professional to facilitate Safety /Environmental/Risk Management plans/systems to Australian Standards.

Heavy Equipment Mechanic/ Operator/ Welder or Mill Maintenance Mechanic.

an experienced radio communication technician and electronics technician

Machinist,C.N.C. / Manual 20+yrs. experience

Class 1 Drivers License, High School Diploma, Fortlift, Variable Reach( Zoom Boom),Confined Space Entry,Ground Disturbance Advanced, Standard First Aid- Level A CPR, H2S ALIVE, OSSA, CSTS, Q Endorsment( Air Brakes),TDG, WHIMS, Opeator, Oil and Gas, Construction.

Hardworking, Dedicated, trustworthy and have the ability to work with others. Acquired Bsc in Mechanical Engineering. Reliable, Honest, responsible, work well independently and on a team. Prepared to do extra work and can work during emergencies. Single with an excellent health. I enjoy interact

11 years experience in the field of surveying and believe that my background and experience would make me a valuable asset to any organization that is looking for a hard working, trustworthy, and professional field surveyor

Geologist, Environmental, GIS, Modeling

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 [ 44 ] 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out