Resume - professional seeking new challenges.

Misco Jobs

Resume #4121

CONTACT INFORMATION:
View contact information...

MSc student with substantial industry experience seeking work in challenging environment
Education:

Oct 03-Oct 04 University of Manchester Institute of Science and
Technology, UK
MSc in Corrosion Control Engineering
An interdisciplinary programme offered by the Corrosion and Protection Science and Engineering centre that has a five-star rating as a centre of excellence in corrosion Engineering. Dissertation leading to the award of MSc in corrosion control engineering will be on coatings and cathodic protection.
0ct 87- June 93 University of Nigeria, Nsukka (UNN), Enugu. Nigeria
BSc (Hons) Chemistry (Second Class Lower Division obtained)
Major project work was the "Synthesis and Application of Triaryl Carbonium Dyes"
Course work consisted of basic and advanced organic, analytical, and inorganic and physical chemistry, with strong emphasis on practical laboratory work.
Work Experience
Jan 03-Aug 03 NOAS Technical Services (on Secondment from Sea Float Marine Services), Port Harcourt, Nigeria
Position held - Project Engineer
* On site supervision of various projects, on corrosion control for client Shell Petroleum Nigeria.
* I was the company representative, responsible for meeting with local communities in oil producing areas.
* Controlled and administered funds and resources used for some projects.
* Compiled and processed field data into reports for clients.

Oct 01-Dec 02 Rockwell Engineering Limited Port Harcourt, Nigeria
Position held - (Sales Engineer)
* Successfully registered company as contractor to some oil-producing firms: Elf oil, Agip oil Nigeria and Addax Oryx Nigeria.
* Coordinated pilot project on soil reclamation and bio remediation. Managed to minimize company losses on cancellation of project.
* Company HSE (Health Safety and Environment) focal point, LTI's (Lost Time Incidents) and RTA's (Road Traffic Accident) fell during the period.

Jan 01-Oct 01 Muajos Limited Port Harcourt, Nigeria.
Position held - (Operations Coordinator)
* Successful supervision of company dredging projects for 1 million m3 of sharp sand.
* Team leader for restivity test survey, project completed in record time.
* HSE focal point, enhanced safety awareness in company.

Nov 00-Nov 01 Peteloti Nig Ltd Port Harcourt, Nigeria.
Position held - (Operations Supervisor)
* Management of crews involved in corrosion monitoring and maintenance of gas plant facilities
* Company logistics focal point. Streamlined expenditures procedure to eliminate contract revisions.
* HSE focal point. Introduction of this feature into the company work ethic.

Sept 98-Jun 99 Dubi Nig Limited, Port Harcourt, Nigeria.
Position held- (Service Engineer)
* Team leader for solid control waste management on board Saipem(Eni s.p.A) AZ5898 and Deutag T6 land rigs at various locations. Wells successfully drilled and produced under budget.
* Conducting of analytical tests previously run by contractors to the company.
* Coordination of the processing of company invoices.

Other information: Membership of Chemical Society Nigeria (CSN), Nigerian Corrosion Association (NICA), pending membership of NACE (National Association of Corrosion Engineers), SPE (Society of Petroleum Engineers).

Relevant Skills:
Fluent in written and spoken English Language. Have14years driving experience. Excellent interpersonal skills with ability to integrate into new environments and experiences.

Professional training:
2003 " First Aid training" – Occupational Health department, UMIST.
2001 " HSE training for contractors"-Shell Petroleum Nigeria
1999 "Solids control/waste management training"- consultancy

IT skills
Proficiency in use of Microsoft office packages.

Other interests
* Football, basketball, swimming and athletics
* Current affairs
* Music.

References will be provided on request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1351 to 1400 of 3191)

Go to Search Parameters...

Brief Description

Diamond and gold mining, Diamond and Gold producer, Diamond and Gold Purchaser

management of R&D programmes, technology strategy, consulting and evaluation

Mechanical background with over 18 years of hands-on, field service experience working on Heavy Earth Moving Equipments, Construction Equipments, Deep Well Drilling Equipments, Marine Vessels and Liberation Plants amongst many others.

I have 4 years of experience in the diamond sorting and analysis field. I am a specialist in the diamond breakage and research field and have worked in countries like Namibia , Botswana and Lesotho

Computer Added Design

Am a male compentant Auto-LHD Electrician with 5years working exposure in different machine and vehicle

Supervisor Forman/Driller International

If you look for person with multitasking capabilities, high responsible character, high detail orientation, then you found her! Just review my resume below and you know you have found one.

I am an experienced mining engineer in the field of coal as well as stone mine.

Several Years experience as drafter, on board last 15 on AutoCAD

Exploration Geologist. Worked in China and Australia on Gold and Tantalum projects respectivly.

Mining degree, 6 years hard rock track and trackless mining experience, planning

20+ years in Control Systems Engineering/Design. Experienced Intools user.

Metallurgist and Materials engineer with 3 years of experience. Wide range of skills in metallography techniques, SEM, TEM, Stastical tools and design softwares. Good communication and presentation skills. Published papers in journals and presented work at conferences.

Free ! YOUNG POTENTIAL in FINANCE & ADMINISTRATION

Experienced Mining Engineer, Production Manager and Planning and Quality Control Manager. Worked as Plant Manager and as Researcher for the Metals and Metallurgical Agency of Japan. This experience is supported by a BSc.Geology, a MSc.Economics and a MBA.

To obtain work in the mining Industry using my experience as a warehouse attendant.

I seek a position that will give me an opportunity to develop project strategies that enhance efficiency through the implementation of cutting-edge technologies, efficient application designs and intelligent reporting practices.

professional seeking new challenges.

Dynamic Safety / Training specialist with 12years within Open Cut mining environments.

Competent in all aspects of open cut mining.

DESGINS BUILT AND MINE PLANS AND SECTIONS IN 2D

Quality assurance, reserch and development. Section - Process control in charge, shift in charge

Renwable Energy Expert

I was in charge to administer financial control systems and procedures on the project site, to promote control policies and practices within the project and with contractors, to provide timely and accurate financial information and reports to the Project Controller and project team, to assist projec

Aspiring to associate with the organization that offers me opportunities to grow both as individual and as a professionaal Seeking Better oppurtunity in Industrial Sales and Marketing area.

Young geologist looking for Interesting Career

Underground Geology Technician & Surface Worker

Graduate Surveyor, December 2008, Western Australia. Looking for mining jobs. Not limited to any location in Western Australia

Blaster, Driller, Driver

Sr Structural Designer / PDS FrameWorks Coordinator and project set up.

15 years of dragline experience

Graduated from the University of Zambia in 1996 with a bachelor's degree in Metallurgy & Mineral Processing. Six years experience in the mining industry. Worked as a Production Operator for 1 year 4 months, 7 months as a Production Foreman. Worked as a Metallurgist for 4 years.

PROFILE: A self-motivated and hard working Geologist with experience in Mining and Exploration of gems, precious metal and industrial metals. A capable leader, able to use own initiative and work as part of a team.

KG Dunaway NCCCO

Emergency Response Technican / Fire Fighter

I have been in mine maintenance for over 20 years, the last 9 as an expat in various countries around the world. I'm a very positive and progressive thinker who adapts to changes and adversties with little fuss. I like to succeed in everything I set out to do

Piping Designer with Over 20 years experience within the Oil and Gas, Petro Chemical, Refinery, Textile, Pharmaceutical and Nuclear Waste Industries

I have over twenty years pipefitting experience. Most of this experience has been in industrial chemical and paper processing. Five years of this experience has been as an foreman. I have used computers for report writing, maintaining records and numerous other tasks, have worked internationally.

10 years experience of geotechnical investigation and environmental remediation

Controls & Instrumentation Engineer/Sr. technician with experience in GE gas turbine controls - (MK II, MK IV, MK V & MK VI), boiler & steam turbine control and protection, DCS, PLCs and instrumentation. I have a total of 15 years experience in the field of controls & instrumentation.

I have 9 years experience working underground. I have been a lead miner with a crew of 5 under me. I have worked in all phases of mining running various pieces of equipment as listed below. I am current on my MSHA training.

10 years certified Ford diesel mechanic, currently 3 years underground mechanic 1 at stillwater mine, worked in oil field for 5 years, have perfect attendance at present and past jobs,

Entry level geologist

EXPERIENCED UNDERGROUND MINER READY TO GO TO WORK.

bsc.degree with 62%.3 years experience as fire assay chemist

Having graduated from The University of Ballarat, Bachelor of Mining Engineering, I am still studying at this moment, and would like to gain some working experience to have a better knowledge about this vigorous industry before my graduation in 2008.

25 plus years of heavy trucking and construction experience.compotent with hand,pneumatic tools, cutting torches, welding in flat position ,current ga. cdl with tank end. hard worker, healthy.

I have experience in the following operations - excavation, ditching, levelling, hammering, drilling, charging, blasting, scaling, timbering, mucking, rock bolting, hauling, shot crating and concreting, steel set installation.

Bachelor degree of computer science and Seeking a challenging position, where my technical and communicational skills can be utilized and developed in field of software or quality assurance

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 [ 28 ] 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out