Resume - 5 year appreniceship as diesel mechanic. 5 years experience as engineer in Briti...

Misco Jobs

Resume #42750

CONTACT INFORMATION:
View contact information...

PERSONAL:
A reliable and adaptable individual, who works well with others or on his own. An effective communicator, who can carry out given tasks efficiently and accurately. Can pick up new skills quickly and easily, and has a keen desire to succeed.

EMPLOYMENT
Feb. '05 to present:
Heavy duty diesel engine mechanic, responsible for the maintenance and repair of all camp generators, and tuition of local nationals in procedures for same.

2001- 2004 Eccosse Diesels
Employed as marine engineer on a sub contractor basis, working in the luxury yacht sector and leisure craft industry.

1998- 2001 Marine Diesel Services
Working on a self employed basis in Grangemouth docks servicing and repairing tug boats and fishing vessels.

1986-1998 Franchised Tool Salesman
Self employed franchised tool salesman, selling garage tools and equipment to the motor trade.

1980-1986 Service Engineer
Working with Aveling Barford on the range of earthmoving equipment produced by the company. The equipment covered dump trucks from 17 to 50 tons, wheeled shovel loaders, graders, and a range of road rollers from 30 cwt. to 10 tons. As an international company, overseas visits were a part of the work load, and involved contracts to, Jordan, Egypt, Sudan, Tanzania, Zambia, Oman, Iraq, and India, to install new equipment and maintain existing equipment.

1978-1980 Transmission Technician
Working with Blackwood Hodge initially inspecting new equipment as manufactured by Terex. Promoted to transmission section for training on servicing, repair, rectification, and overhaul procedures on all transmission units as fitted to the range of equipment.

1976-1978 Service Engineer
Working with T.W. Ward as a mobile service engineer servicing and repairing a wide range of plant and hydraulic excavating equipment.

1969-1976 Marine Engineer
Joined British Merchant Fleet as junior engineer and was gradually promoted to third engineer. Duties included watch keeping on main engines and generators, and all auxilliary equipment simultaneously. 18 months of service on an oil drilling and exploration vessel.

1964-1969 Apprentice Diesel Mechanic
Taggarts B.L.M.C. Dealership. Trained in all aspects of the repair and maintenanance of commercial vehicles.

Further Training. Gained the city and guilds certificate in automotive engineering.

Mitchell Diesel Ltd. Completed course of instruction on Detroit Diesel V71 series engines tune up and preventive maintenance.

Cummins Diesel Ltd. Completed course of instruction on maintenance and service of "N" series engines.

INTERESTS AND ACTIVITIES
Cycling, motor sports, natural history and animal welfare.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 901 to 950 of 3179)

Go to Search Parameters...

Brief Description

Safety Trained, Engineering Disciplined, Production Oriented, Cost Conscious

I have worked for mining industry for last 9 years

A self-motivated and dedicated young graduate of balanced aptitude, with interest in the Environment, Engineering Survey, Geographic Information Systems (GIS) and its applications, seeking a challenging and demanding job in a mining establishment, to enhance my knowledge and skills.

Geological Mapping - surface and underground. GIS, 3D CAD/mine planning software, computer programming C, C++, Fortran. Rock Mass Stability - including mechanical and geophysical properties. Technical and business writing, public speaking, and teaching skills. Knowledge of seismic risk assessment.

Registered N.Z Electrician (currently in the process of gaining W.A registration) Industrial Measurement & Control Units Twido Advanced Plc Current Basic First aid, CPR & Safe working practises Full car, truck & motorbike Licences

4 years experience in the minerals processing field where he acquired knowledge of unit operations in flotation of low grade nickel sulphides, nickel sulphides concentrates smelting, Ni-Cu matte leaching, solution purification and Ni electro-winning.

SNR Supervisor & Superintendent experience currently working offshore

Able to repair and maintain the functionality of Auto/Heavy Equipment Electrical

5 year appreniceship as diesel mechanic. 5 years experience as engineer in British Merchant Navy .Conversant with Caterpillar, Terex, and Aveling Barford earthmoving equipment , various supervisory positions worldwide in different disiplines

B.S. - Mining Engineering. 20+ years experience as a mining engineer and staff supervisor in open cut copper mining utilizing earth-moving, drilling, blasting, drainage maintenance, and dewatering equipment. Also have several years experience with open-cut coal mining. Willing to relocate.

Senior International HSE Manager, Master's in OHSE, Oil and Gas + Mining Experience

Due to plant closing I am seeking new employment. I can disassemble and reassemble various types of mining equipment. Including gear cases, hydraulic components, and re-hose equipment.

Good experience in the operation of mining and quarry activities

Over thirty years milling experience, both operating and supervisory positions. Worked extensively with lead, zinc, and gold.

DMS Operating, Instalation, Documentation and Implementation of ISO14001, ISO 9001, Treatment plant supervisisng etx

Transmission Planning

I have been in backfill for the last 12 years, i have also been involved in grout packs for the gold mines in South Africa.

Piping Designer PDS CAD

I am applying for the position of a Geologist, am a male citizen of Ghana currently attached to Red Back Mining Inc (Chirano Gold Mines Ltd) as an Exploration Geologist.

An enthusiastic and dedicated professional with extensive experience across all areas of land surveying with exception leadership skills who is able to develop and motivate others to achieve targets.

GIS, Oracle, SDE, ARCGIS, Data Model, Administration, Senior GIS, CMMI

Mechanical Engineer - 15 years of professional experience: of which 10 years as Project Manager for implementation of industrial plants and major expansions (Steel plant and Brewery) and 5 years as quality engineer and design engineer.

Fault / Routine System Maintenance

Heavy equipment mechanic for caterpillar machines

Surface Mine Engineer

Experienced Mining Engineer and MBA with vast experience in underground and opencast coal mining operations , HR management and business development.

30 yrs. experience in equipment maintenance, operation, and supervision. Expertise: Supervision, planning, cost control, record keeping, PM scheduling, maintenance and repair (electric, diesel, gas), Hydraulics, Pneumatics, Pump and dewatering systems, Milling.

- Over 11 years of management and supervision experience in the mining industry. - Extensive practical experience in mine planning, production optimization, cost control, and safety training. - Good communication and organization skills. - Experience in mine construction.

I am a second year MBA student at The Haas School of Business, U.C. Berkeley with experience in procurement, supply chain, logistics, project management, and consulting. I have 8 years of work experience, specially in supply chain optimization in the Latin American region.

Mining or Heavy Equipment O&M Hands On Management - 17 yrs exp mainly in developing world base metal mines. Strong Training background. Advanced Computer Skills. UK Citizen.

21 Yr Exp Power Electronics - Electrical Engineer, Large Variable Speed Drives & Motors, Automation

22 years experience of which 12 years with in the oil sector where I had to Implement systems, overseeing accounting and carrying internal auditing missions, Significant experience in start up process, J.V. management, Fluent in English, French and Arabic.

I consider myself a resposable and reliable professional, I always give the best of me to the company that i work for. My priority in life is to seek my family's and my own wellbeing

South African Grade12, Higher Certificate in Occupational Directed Education,Training,Development,Practices.Registered Workplace Assessor,Registered Moderator,SHEQ Management,SHEQ Lead Auditor,

Motivated individual with vast experience on Marketing eager to bring to your firm with ability to increase growth, profitability, efficiencies and shareholder value.

FEA ANALYSIS, HYDRAULICS DESIGN, MECHANISM DESIGN, MEDICAL DEVICE DESIGN

Highly experienced in heavy mining equipment, welding, electrical(including PLC's), and mechanical. Large hydraulic and electrical shovels.

Objective: positions utilizing my extensive knowledge and expertise in the field.

Logistics 10+ years experience including: Commercial(Mining) project logistics; Humanitarian aid ; and, Military. Transportation & Distribution management; Warehousing; Purchasing. Fluent in both English and French; and computer literate.

Looking to surround myself with quality people in a professional environment that strives for excellence in every task. To be a contributing member of a quality team. I want a position that allows me to grow as a person as well as an employee.

Objective: Crusher / Beltline / Stacker and Equipment Operator

Please find herewith the enclosed resume of mine for the post of Mechanical engineer. As I have more than 10 years full experience in the field Heavy earth moving equipment.

With Fourteen Years Experience in the mining field both construction and development. Nine Years Supervisory Experience. Eleven Years drilling and blasting. BCOA Certified. I feel I would be an excellent asset to your company. Certified MSHA Trainer. EMT 1 Certified. Il supervisor papers.

Metallurgical engineer seeking an extractive metallurgy or mineral processing position. Interested in areas where the main objectives are process improvements and quality control. Analytical and inquisitive with a Midwest work ethic.

COMPUTER GEOLOGIST Databases, GIS & 3D Modelling Project & Quality Management

Details of career brief version

13MONTHS - SAFETY 7 YEARS - SHAFT 5 YEARS - DRIFTS 6 MONTHS - STOPES

BE (MINING ENGG) WITH THREE YRS OF WORK EXPERIENCE IN ZINC

I am an industrious, innovative, intelligent, success driven, and self-motivated university graduate. Dependability, poise, humility, very optimistic and above all God fearing are my hallmarks. I am a good team player with good communication and interpersonal skills

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 [ 19 ] 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out