Resume - Internationally Experienced Heavy Equipment Mechanic

Misco Jobs

Resume #42870

CONTACT INFORMATION:
View contact information...

EDUCATION
1980-1981
Red River College, Winnipeg, Manitoba, Canada.
Obtained Heavy Duty Diesel Mechanic - Trade Certificate/License
Interprovincial Level.

1965-1969
Worthing College, West Sussex, England
Obtained Heavy Duty Diesel Mechanic - City and Guilds Diploma.
Did five years apprentice mechanic training in a heavy equipment workshop with Hall & Company Construction Ltd, Worthing, England.

1960-1965
St Andrew's Secondary School, Worthing, West Sussex, England
Passed the Eleven Plus Examination

EMPLOYMENT
2001 August - Present
Sifto Canada Mining, Goderich, Ontario, Canada.
Employed as Heavy Equipment Underground Mechanic

1999-2001
Ontrac Ltd, Windsor, Ontario, Canada.
Employed as Workshop Mechanic, Heavy Equipment.
I repaired and overhauled all earth moving equipment for this John Deere dealership. My work involved in-workshop repairs to all major components i.e. engine/transmission overhauls, axle rebuilds and major hydraulic repairs. I was also responsible for on site diagnostics to customer equipment as required.

1995-1999
Schlumberger-Geco Prakla Division, London, England.
Employed as Senior Mechanic Supervisor.
First in Saudi Arabia and then in Libya.
I managed the workshop in a hands-on operation. I supervised the mechanics in the daily repair of vehicles and equipment for seismic operations. I was responsible for maintaining an on-site operation to a constantly moving workshop in a desert location within very remote areas. I managed stores inventory and maintenance schedules for the equipment used in the seismic operations i.e. caterpillar diesel engines and equipment and Cummins powered equipment including camp generators. In addition, I recruited and trained the local mechanics to work on the operation.

1990-1995
Hudson Bay Mining and Smelting, Leaf Rapids, Manitoba, Canada.
Employed as a Heavy Duty Lead Mechanic – Underground Copper Mine
I repaired scoop trams, trucks and Tamrock drilling equipment. I overhauled major components for all underground mining and drilling equipment i.e. engines, transmissions and final drives. This included Clarke, Wagner and Caterpillar mobile equipment.

1988-1990
Ove Arup Ltd., London, England.
Based in Tanzania, East Africa.
Workshop Foreman
I ran the workshop operation which involved overhauling the Parker Crusher and maintaining the support equipment i.e. Caterpillar loading shovels, Tamrock and Airtrack drills and pumps.
I supervised the workshop and the training of a staff of local mechanics in a hands-on operation to ensure the maintenance and smooth running of the equipment for the Songea Makumbaku highway operation. In addition, I was responsible for all repairs and maintenance to all camp generators and equipment in a difficult environment. This work involved training local labor with limited resources in a very remote location. Use of initiative, improvisation and self-motivation was a major aspect of this contract.

1982-1988
Biwater International U.K.
Various locations overseas
Mechanic Assistant Supervisor and then in 1984 promoted to Workshop Supervisor.
The company had ongoing jobs in several countries, Iraq, Jordan, Nigeria, Abu Dhabi and Trinidad. Initially, I was sent to Iraq to set up a workshop for a new contract 50-km south of Baghdad. This included installing on site camp generators and setting up the workshop and parts department. I was responsible for mobilizing equipment as it arrived on site after being shipped from the U.K. When the operation was mobile, I ran the workshop on a day to day basis and managed the stores inventory of parts. In addition, I provided the training and supervision of the local staff of mechanics. Later on, I traveled extensively to other countries to implement efficient and economical workshop practices for those operations.

1980-1982
Hudson Bay Mining and Smelting Company Ltd., Leaf Rapids, Manitoba, Canada.
Copper Mine
Employed as an Underground Heavy Duty Mechanic.
I repaired and maintained all mobile underground mining, drilling equipment and support services.

1978-1980
Volker Hochtief Ltd
Two year contract in Saudi Arabia.
I was employed at Jubail on a harbor project as a Field Service Mechanic.
I had to complete on site repairs to all heavy-duty equipment i.e. mobile cranes, caterpillar earth moving equipment and stationary equipment consisting of mobile batching plants, generators and air compressors.

REFERENCES
Qualifications and other references available on request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 451 to 500 of 3130)

Go to Search Parameters...

Brief Description

A Professional Engineer with design, sales, plant, project, and application engineering experience.

Analyze, design, develop, implement, and evaluate performance improvement programs using the ADDIE process. Experienced in designing and developing online (Web-based e-Learning) and blended learning as well as video training. Have used/been trained in Microsoft Word, PowerPoint, Excel, and Project,

Free! BSc. Honours (Geology), Gemcom/Surpac superuser

I have been responsible for many types of mining equipment from underground mining equipment, trucks, loaders, and drills to some of the largest models of heavy equipment used in open pit mining. My experience has included new mine start up and implementation of a planning department

Safety Rep/Maintanence supervisor

Remote Site Expert : Global Experience.

Mine Planning Engineer

20 yrs exp in heavy equipment

Mill Operations General Foreman / relief Project Mgr / Operations foreman / trainer . 27 years of experience / Commissioning and Overseas experience

I have been involved in mine mobile equipment maintenance for the past 16 years. Have handled different equipment brands from Tamrock, EJC, Toro, Eimco, JCI, Rammer, Atlas Copco and Wagner load-haul-dump (LHD) and low profile trucks(LPT) to underground jumbo drilling rigs, longhole drills,rockbolter

Seeking entry level positions as project engineer, planning and operational duties. Willing to relocate

George, is a team player with very good human relation and excellent oral and written communication skills. He is innovative, resilient, self motivated and adapt quickly to dynamic environment with excellent leadership qualities. George has used a number of 3D softwares for Geological Modeling.

M.Tech.(Applied Geology ), 6 yr experience , in field of mining ,exploration, etc.

Supevisor/Mining Equipment Trainer with more than 15 years experence

Product Support for Hydraulic Drilling Rigs and Screw Compressors

Good Surpac skill, over 3 year experience, supervision drilling campaign, geological assessment

Underground Miner Dedicated professional with a proven record of accomplishments and consistent contributions that increase efficiency and productivity. Fluent in the operation and maintenance of bolter, buggy, miner, belts, diesel scoops, jackleg drills, etc.

Skills: Shift Supervisor, Air Jumbo, Electric Hydraulic Jumbo, Remote Control Electric and Diesel Scoops, Haulage Trucks, Boart Long Hole Drilling, Blasting, Jack leg, Rock Bolting, Cavo, Timbering, Staging, Slusher, Development, Raise Mining, Mine Rescue, Fire Fighting, First Aid

Over twenty one years experience as Heavy Duty Mechanic, seventeen years with underground mining contractors. Over eleven years experience as Master Mechanic and Lead Hand.

I am a experienced industrial electrician/electrical supervisor of fifteen years. My electrical experience is in the mining and rolling mill industries. I also Possess my MSHA and West Virginia electrical certifications up to and including high voltage for underground and surface work.

I have been working in Africa for the last 6 years on managerial level in the security industry. I have the ability and experience to work in a general management position.

March 24, 2007 Electrical Technician / Electrician

Currently studying a Masters in Business Administration; Bsc Honors in Metallurgical Engineering ; 5 Years experience in the mining industry

I have an extensive back ground in mining exploration. GEMCOM, SURPAC, and Mapinfo are some of the software products I have utilized in my career.

Mobile Equipment Maintenance position sought. I am a Mechanical Engineering Technologist as well as a certified Heavy Duty Mechanic with over 30 years of experience. I have excellent trouble shooting skills in hydraulics, electrical, and mechanical systems.

MAINTENENCES MANAGEMENT OF ALL MINING EQUIPMENT

-Softwares:Drafting:ACAD2000i, VAX; Office: Word, Excel, Access, Powerpoint, Internet Explorer -Highest degree: MSCE / Mining -Experience: Engineering: open pit and under ground mining; Technology: Computer hardware and software, Management: Administration, Finance & Business Development.

I am an independent consulting Mining Engineer based in Perth, Western Australia. I specialize in temporary management replacement, mine design, and mine project evaluation in Australia, Asia, and Latin America. No job is too small and all inquiries will be responded to.

Engineering manager with experience in: Developing internal teams. Controlled a 35 multi-disciplined trades people. Contractor relations. Commercial awareness. Designed and project managed a US$1.6 million Waste fuel facility installation. Managed a maintenance budget of US$2 million.

Experienced exploration geologist available for overseas posting. Have worked for large foreign exploration companies during the past six years.

Over 20 years in the Finance, Administration and Internal Audit Management

Maintenance

Assayer

Internationally Experienced Heavy Equipment Mechanic - Workshop Supervisor

Mining Engineer with a flair for production& Marketing, Managerial background with wash plant experience

Experienced heavy earthmoving machines and plant hire diesel mechanic with extensive knowledge of construction equipment, crusher plant, trucks and buses.

M.Sc. ing. Mineral Exploration. I am a young, reliable, meticulous and enthusiastic geologist . I work well on my own initiative or as part of a team and can deal with administrative duties and interact well with other people. I relish being exposed to new ideas and experiences.

4 year apprenticeship training which was managed by the Zimbabwe registrar of apprenticeship and skilled manpower. The apprenticeship was undertaken with the Anglo American group at, BNC smelter and refinery, BNC epoch mine

I am working at Hydrocarbon Development Institute of Pakistan working on source rock maturity and coal rank determination.

Competent Project Controls specialist with Estimating, Claims Management and Risk Management skills. Experience spans 35 years in industries including Nuclear, Fossil and Hydroelectrioc power, Oil and Gas, Refinery and LNG plants. Multi-discipline estimating skills at all levels from FEL onwards.

I have experience in construction and quarry drilling and blasting.

Administrator of companies, client service, 8 years expirience in retails busines.

I have >30 years multi-commodity experience, more recently focussed in gold and uranium, from grass roots exploration thru feasibility study.

As can be seen from my resume, I have the ability to readily learn and adapt to new job duties and conditions. With my work ethics, engineering background, and various job experiences, I believe I can be an asset to your company.

Mineral processing engineer, AutoCad drafter and transportation system design

I beleive my strong college degree and work experince in mining, construction and logistics operations will be an asset for any organization.

mapping, remote sensing, exploration, aerial primary data acquisition.

A hard working, self motivating and a responsible individual with an out going personality. Excellent in public relations and in communication skills (Three Languages). Enjoys meeting challenges remains confident and calm under pressure & Good team player

Hands on Mining Engineer with eight years of post graduate experience. Have experience on both surface and underground mines. Largely mine planning/scheduling and production/operations supervison experience. Computer literate and have worked with 3-D mine planning software. Available now.

Senior executive and experienced with an Metallurgy Engineering degree

First 1 2 3 4 5 6 7 8 9 [ 10 ] 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out