Resume - Industrial Electrician

Misco Jobs

Resume #4454

CONTACT INFORMATION:
View contact information...

Dear Hiring Professional:

I am seeking a position as a Licensed Journeyman Electrician with your organization. My résumé outlining my experience, skills and education is enclosed for your review and consideration.

I possess over 15-years of progressive and successful experience in this field. I am a dedicated employee and offer excellence in my job performance.

I would appreciate an opportunity to meet with you to discuss your needs and my qualifications in greater detail.

Thank you for your attention and consideration. I look forward to hearing from you in the near future.

Sincerely,

Richard Rivera

LICENSED JOURNEYMAN ELECTRICIAN

Professional electrician with over 15-years of experience working in the electrical field performing installations, disconnects, maintenance, troubleshooting, and customer service duties. Possess extensive experience working in industrial maintenance and as a Foreman. Focused on excellence in job performance and safety. Excellent communication, time management, and organizational skills.

Computer Literate
Bilingual: Fluent in English and Spanish

LICENSED JOURNEYMAN ELECTRIAN
New Mexico License EE98 – J 30793

EXPERIENCE-SKILLS

* Over 15-years experience working in the industrial field performing installations, termination, troubleshooting, repairs, and maintenance.
* Electrical rough-in, trim-outs, and modifications in commercial and industrial constructions.
* Troubleshooting of new and installed electrical systems to locate and correct malfunctions; read and interpret blueprints and circuit diagrams.
* Troubleshoot and install VFD's, as well as, PLC's (Allen Bradley).
* Perform instrumentation repairs and modifications.
* Installation of large and small pipe and conduit; wire pulling for electrical system, computer, and telephone systems.
* Electrical installation, removal, repair, and maintenance of fire alarms and telephone systems.
* Motor hookups, start-stop stations, and control wiring to include 24, 120, 208, 277, and 480-volt systems.
* Installation of electrical panels and temporary poles; work with overhead, slab, and underground wiring up to 13,800 Volts.
* Order and maintain inventory, and utilize various hand tools.
* Mine electrician; maintain P&H shovels, drills and electric haul trucks substations 4160 Volts.
* Clean Room experience terminating MCC transfer switches and panel.
* Mentor new electricians on troubleshooting unfamiliar equipment and operating procedures.

WORK HISTORY

Industrial Maintenance Electrician 2/95 to Present
PHELPS DODGE MINING CORPORATION El Paso, Texas

Journeyman Electrician 10/94 to 2/95
GARDENER ZEMKE White Sands Missile Range, New Mexico

Electrical Forman 4/94 to 10//94
BOWEN CONTRACTORS (PHELPS DODGE) El Paso, Texas

Journeyman Electrician (Shut Down Ops) 2/94 to 4/94
BROWN AND ROOT (PHELPS DODGE) Playas, New Mexico

Journeyman Electrician 11/93 to 2/94
BIG J ENTERPRISE (INTEL PROJECT) Albuquerque, New Mexico

EDUCATION

Grants High School, Grants, New Mexico
Diploma

TRAINING AND CERTIFICATIONS

GE Transportation Systems 930 E Electric Haul Trucks
40 Hours Course

HAULPAC Mining Electric Haul Truck Field Training, Maintenance, and Repair
Certification, Komatsu Mining Systems

EMT-109 Safety and First Aid Standards
Certification, Eastern Arizona College

Action Teams Training Course
Certification, Phelps Dodge

Hydraulic Maintenance Technology
Certification, The Parker Hannifin Corporation

Continuous Improvement Process Techniques
Certification, Phelps Dodge

Fork Lift Operation
Certification, Phelps Dodge

CPR Certified
Phelps Dodge

MSHA Certified
Phelps Dodge

References will be provided on request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1301 to 1350 of 3437)

Go to Search Parameters...

Brief Description

I am a Mining engineer and I got Manager's certificate.I got four years experience with Continuous Miner technology and also I got quite good knowledge of Strata Monitoring instruments.I also got very good Computor skill.

currently postion: site engineer, with Orica PNG ltd, graduated with a Diploma form the University of Technology Lae, PNG.

Mining Shaft Supervisor, Equipment Operator, Maintenance Supervisor

Maintenance Technician - Fixed Plant

I have extensive experience in maintenance fitting , in mining and industrial fields

For the past 6 years, I have had a rewarding career as a mining and geotechnical engineer and as a surveyor. My educational background includes different aspects of earth sciences (Master of Science in Mining Engineering). I have worked in mining operations and R&D as well.

MECHANICAL ENGINEER

New calédonian based Exploration and Mine Geologist, 5 years experience. Project management, core logging, mapping, strong structural geology skills. Proficient in the use of SURPAC, MAPINFO, GPS programs, Corel graphics and database programs. Available worldwide. x

10+ years of project management experience in the areas of accounting and financial reporting in various industries, including Management Consulting, Retail and Wholesale, Manufacturing and Distribution, Mining and Construction

4 years underground mining experience, current MSHA, 2009 Underground Blasting Training Course, Underground Core Skills Program,

Former GS 15, U.S. Government Contract Officer (KO) & Administrative Contract Officer (ACO)¡Xcurrent Senior Level Professional seeking a Project/Program Management and or Business Development opportunity

Mechanical Engineer - 20+ years maintenance experience in mining - both Underground & O/Cut. Also Processing Plant maintenance & Project Management on new Greenfields plants.

Expert Contracts and Business Development Manager with more than 20 years of experience with major oil/gas operators in the Middle East and exposure to Contracts Management from start till award and post award, establishing new ventues in drilling, engineering and related fields, & procurement.i

I have confident, good communication skill, able to adapt to new environment very fast.

I am Mine Surveyor with more than five years experience in the Zimbabwean mining industry. I established survey offices at Sino-Zimbabwe Cement Company and Murowa Diamonds being the first permanent employed surveyor at the Mines. I have experience in Surpac, AutoCad and Vulcan mining softwares.

Previously employed to Rusal (Guyana) as a Planning Manager

D10 dozer, 637 push-poll scraper, Loaders, Crusher, Track-hoe, Blade, ect. Maintain equipment, water lines, sewer lines, house pads, Road construction, Airport construction, GPS. ect...

Exploration Geologist with 10 years of diversified experience

Production with safety

Mine Planning Superintendent

Professional Geoscientist with 7 years international field experience in mineral exploration. Setup, hiring, training of field teams of local geologists. Archean lode Au, umf-hosted Ni-sulfide, porphyry Au-Cu and gemstones. Dutch Guyana, Madagascar, Tajikistan, Uganda, Mongolia, Canada, Mexico.

Process Engineer 10 years O&G + Mining Experience, Global leader in BR&E Promax process simulation, Gas Dehydration, Water Treatment (both produced water and seawater injection), hydrocyclone, flotation and filtration technologies. Comfortable from the Pre-FEED level down to the nuts & bolts.

Fourteen years of experience in Office Administration, Procurement, HRD, Public Relation and Sales Coordination has energized me to seek suitable position in renowned companies. My quest is to further broaden my horizons so as to facilitate better opportunities to serve &better objective to achieve

Being an AutoCAD Drafter/Technician, I have had tremendous experience (10 years) in the Building Construction as well as Mining industries.

Rigger at mine construction uderground rigger,structural erection steel fabrication,demolist and asembly. 3G licence welder, scafolder.

Professional Mining Engineer (CEng MIMMM) searching for senior level position in a open pit mining project in FSU

Over 11 years of SAP BW BI experience as a developer, Lead and Manager

Wetland Studies, Wildlife Research, Environmental Assessment, Endangered Species Survey

shipping Management, Stevedoring, Logistics

Successful track record for planning, organization, leadership and project completion Accurate record keeping and scheduling skills regarding personnel and maintenance Ability to develop and establish operational and administrative policies Excellent computer skills

Mechanical Designer using Catia -UG-Pro-E

B.Tech Mining Engg.

Having nearly completed a Bachelor of Business (Human Resource Management) I am keen to start exploring opportunities within my main area of interest.You will find me a self-motivated, hard-working employee who enjoys a challenge! I am outgoing and always give 100% when it comes to my job.

M.B.A. and Licensed Professional Mining Engineer with record of success in operations and engineering management. Creative problem solver with ability to develop real economic profits, lead during change management and create business strategies.

looking for mines manager job as i am second class mine manager certificate holder from directorate general of mines safety under India mmr 1961. and having nine years of experience in different minerals as a mines manager asst. manager.

Seeking a suitable electrical position that will utilize my skills and offer growth in the mining, manufacturing or construction industry.

Graduate Mining Engineer that speaks Spanish, English, German and French willing to work in the mining industry.

Industrial Electrician

Australian Mining Engineer

A short history of my past job experience. I have no history in mining but am looking to get into the industry. Any pointers on licences which would be advantageous to have would be appreciated, my contact details can be found below.

Experience welder and heavy equipment mechanic

Senior Structural Designer whom has been on both sides of construction. I started out on the tools and made my way into the design and engineering. Please review the letters of reference on my website. My background has always been an asset in the design office.

Geophysicist

Contract design, award and management, procurement plans, purchasing, invoice payments and cost control, contract administration

ILS Paramedic;Firefighter;Rope rescue technician;Hazmat operator

Junior Mine-Geotechnical Engineer, Rock Mechanics & Application, Explosives & Blasting, Numerical Analysis relate to Mine/Geotechnical project

Awarded 'Best supply chain personnel' from the Minister of Electricity. Reduced inventory value and lead time by identifying cost saving /part standardization initiatives, purchase avoidance, centralized purchase and standard localized supply .

I have many years in mechanical electrical troubleshooting and Repairs also very skilled in fabrication and welding repairs.

A Certified Human Resources Professional with practical and progressive experiencein Africa, Central America, Canada, USA, Central Asia and the Asia-Pacific region.

Materials/Ceramic/Metallurgical Engineer/Materials Scientist; Skills: Materials Characterization, Metallography, Microfabrication, Ceramics, Titanium & Titanium dioxide, Superalloys, Mechanical Testing; Qualifications: MS and BS in Materials Science Engineering

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 [ 27 ] 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out