Resume - I am a Heavy equipment operator /crusher mechanic/welder, I am looking for a bet...

Misco Jobs

Resume #44565

CONTACT INFORMATION:
View contact information...

Hello I am David Price from the United States I am 51
years old I am looking for good long term employment.
I have been on and around heavy equipment all my life in construction trade and mining trade and farming.
I am a heavy equipment operator/crusher mechanic/all around.
I can operate Loaders 988&down, Dozers D10&down
Excavators the largest of which was a 330 Cat, travel is fine overtime is good I will go where the work is.

( I am experienced and know what I am doing)
( I can operate Loader/Dozer/Excavator/Blade)
( I can operate and maintain screening plants/cone crusher/
and the conveyers replace and repair belts )
( I can weld and fabricate for this equipment )
( I am mechanically inclined )
_______________________________________________________________

I am a Citizen of the United States I live in Arizona 60
miles from Kingman, and 55 miles from Boulder City, Nevada.
_______________________________________________________________
WORK HISTORY

Farming grew up on the farm

Boulder sand & gravel Boulder City Nevada as foreman/
operator/ mechanic worked on the crushers and screen and conveyers and welding and when needed loaded trucks and fed the plant stockpiled different sized landscape rock operate the dozer pushing down product from 10/2003 to
03/2004 laid off.

Kalamazoo inc. Tucson Arizona as operator/mechanic fed the plants loaded trucks stockpiled different sized rock landscape rock operated dozer pushing down product and pushing in new roads work on the crushers and welding operated blade maintaining the haul road and main road in from 04 /2004 to 10/2004 Dangerous work conditions.

American asphalt and grading Boulder City Nevada as crusher mechanic/operator work on the crushers and screening plants and conveyers and when needed operated loaders From 02/2005 to 10/2005 laid off.

Goodfellows corp Boulder City Nevada as crusher mechanic/
operator repaired crushers and screens conveyers and welding operated overhead cranes and 50 ton wheelcranes and forklifts excavator with hoe ram breaking concrete from 10/2005 to
08/2006 went to a better job.

Fann contracting Prescott Arizona as operator stockpiling the different sized rock for asphalt, shoveling and maintenance from 08/2006 to 12/2006 no perdiem and not enough hours we were only working 30 hour a week I was out of town driving 150
mile to get to work then paying motel and food.

Nevada red gravel a division Cedco inc. Las Vegas Nevada as
Superintendent/ Heavy equipment operator / crusher mechanic/
all round, fed plant stockpiled different sized landscape rock operated excavator pulling down product from the high wall and digging operated blade and loader maintaining haul road and main in From 01/2007 to 08/2007 on the 9th of August2007 they shut down till things pick up again because of the fuel prices and housing market

At the present time I am with FNF Construction out of Tempe,Arizona as a Heavy equipment operator with the crusher division stockpile/feed we travel in AZ,NV,NM. I am looking for something better.

_________________________________________________________
PROFESSIONAL REFERENCES
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1351 to 1400 of 3494)

Go to Search Parameters...

Brief Description

Graduate Mining Engineer that speaks Spanish, English, German and French willing to work in the mining industry.

Industrial Electrician

Australian Mining Engineer

A short history of my past job experience. I have no history in mining but am looking to get into the industry. Any pointers on licences which would be advantageous to have would be appreciated, my contact details can be found below.

Experience welder and heavy equipment mechanic

Senior Structural Designer whom has been on both sides of construction. I started out on the tools and made my way into the design and engineering. Please review the letters of reference on my website. My background has always been an asset in the design office.

Geophysicist

Contract design, award and management, procurement plans, purchasing, invoice payments and cost control, contract administration

ILS Paramedic;Firefighter;Rope rescue technician;Hazmat operator

Junior Mine-Geotechnical Engineer, Rock Mechanics & Application, Explosives & Blasting, Numerical Analysis relate to Mine/Geotechnical project

Awarded 'Best supply chain personnel' from the Minister of Electricity. Reduced inventory value and lead time by identifying cost saving /part standardization initiatives, purchase avoidance, centralized purchase and standard localized supply .

I have many years in mechanical electrical troubleshooting and Repairs also very skilled in fabrication and welding repairs.

A Certified Human Resources Professional with practical and progressive experiencein Africa, Central America, Canada, USA, Central Asia and the Asia-Pacific region.

Materials/Ceramic/Metallurgical Engineer/Materials Scientist; Skills: Materials Characterization, Metallography, Microfabrication, Ceramics, Titanium & Titanium dioxide, Superalloys, Mechanical Testing; Qualifications: MS and BS in Materials Science Engineering

To obtain employment in a mining environment so that my past skills and work experience as a Geological Tech can further grow and be challenged.

To utilize extensively my Technical and Business skills in an Engineers role, particularly bring about change in an Organization to improve system and procedure, Cost Control, Management reporting and strategic Planning in order to maximize profit and minimize risks

I have been working in the mining environment for 9 years and the last three of which have been as mine supervisor at Lac Des Iles Mine. Prior to supervising I was a Heavy Equipment Operator, Blast Technician, Site Services Operator, and Haul Truck driver.

Computer ?Automation & Controls Engineer

To secure a position within a company with longevity and growth potential, while enabling me to utilize my practical skills and experience

INDUSTRIAL / COMMERCIAL EXPERIENCE : Water Treatment Chemicals and equipment, Mining, Food, Specialty Gas

U/G experience. Currently in an open pit

Posses the ability to develop conceptual and or final mechanical designs, plot plans & equipment arrangements working from P&ID’s or PFD’s. Prepare complete detailed design drawings from P&ID’s, edit specifications and review/markup construction shop drawings for many industries

14 Years of Technical and Service Industry Experience as a Staff and Consulting Engineer within the Environmental, Health & Safety Field.

Infor FMS SunSystems, including Vision XL, Vision Executive, Agresso, SQL, UNIX,

As a senior Mechanical Engineer, has over 10 years experience in the engineering industry, mainly in the water cycle, mining and minerals processing practice sector. He has expertise in fluid mechanics practice area, especially in Water and Alumina processing.

To do maintenance tasks and overhaul all types of mechanical equipment. This includes, but is not limited to, dismantling and stripping equipment, assembling and reconditioning equipment, faultfinding on mechanical equipment and the lubrication of bearings and all moving parts on overhauled equipmen

Bilingual Mechanical Engineer with 22 years experience in planning, management and maintenance.

More than 10 years practical experience in the technical side of the risks of the Oil&Gas business

I am currently doing PhD at Osaka City University, Japan. My studies are related to metamorphic rocks. The studies include the analytical works mainly Field mapping, geochemistry, Mineral chemistry and Fluid inclusion

I am looking to gain experience at a mine site and go on to develop a career as a mine geologist.

Highly motivated, graduating June 2003 from a Mineral Processing Engineering program, University of Toronto, worked in the Nickel and copper concentrator and semelter, familiar with diamond processing, proficient in Microsoft PowerPoint, excel, word. Hard working, bilingual and willing to relocate.

I would like to further my career in maintenance and would enjoy the opportunity and challenges that this opportunity would offer. I believe I have the skills and knowledge that would be an asset to any operations.

I have mining experience as an engineer and as a miner, in both domestic and international environments. I hope to establish roots writing a mining company starting with a junior engineer's positions.

Highly motivated, team-oriented individual with excellent communication skills. Two years of industry experience with Turner Construction-USA & NESPAK-Pakistan respectively. Prepared budget reports, schedules, estimates and bill of quantities and performed engineering supervision of various trades.

A highly experienced and motivated mine surveyor. Specified mine surveying and mine modeling.

Finishing my MS degree in Geology and looking for a career. I am willing to travel and/or relocate. I am able to work in the US, Europe, and Canada, although I could move anywhere.

Sr. Lead Piping Designer, AutoCAD, AutoPlant, PDMS, MicroStation, 3D

Product Distribution / Customer Field Support / Product Design-in / Market Development / Data & Market Analysis / Disti support / Market material writing / Public presenting / OEM Relationships / Product Presentations / Technical Analysis / Technical writing/translating

I am a eager person with 12years diamond mining experience at present I am the production supervisor and my role entails meeting set targets of carats, mining rate and square meters. I run a department of 12 people, and is responsible for educating them with the marine and safety laws.

Fifteen years experience in the oil and gas industry. Five years overseas work experience in Libya and Indonesia. Experience working on onshore and offshore projects. Experience with a variety of equipment including centrifugal pumps, gas compressors, pressure vessels, piping.

I am a Heavy equipment operator /crusher mechanic/welder, I am looking for a better employment.

I am open pit mining technician with experience in drill and blast, load and haul and pit services. I have worked for both precious metal (gold) and base metal operation(chrome) in senior positions.

Operations manager with 30 years experience in the mining industry.

Project Manager / Engineer, Private & Public Sector Experienced

Interpersonal abilities, Communication skills, 25 years of supervisory experience, Organizational strengths, Analytical/problem solving skills, Administrative, coordination, and management skills, Strong initiative

Free! I am a production geologist with over 15 years experience across a wide range of commodities including base metals, copper and gold in both open cut and underground environments.

Having a long-lasting interest in mineralogy, I am willing to find a job that will allow me to use and expand my knowledge and analytical skills in the field of mineral exploration.

Graduate Research Assistant, University of Nevada, Reno (Jan 2004-present)

14 years Open cut mining experience with various makes and models of Earthmoving Machinery, 12 months experience over seas as an Expate in Africa. Currently in a supervisory role looking after field service personnel and workshop personnel.

I am Mining Engineer specialised in Driilling & Blasting

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 [ 28 ] 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out