Resume - I had completed my graduation in Mining Engineering from University of Engineeri...

Misco Jobs

Resume #50190

CONTACT INFORMATION:
View contact information...

CAREER OBJECTIVE
To manage project with so zeal and concentration that should be a − More Economical, b − more profitable, c − More safe

PROFESSIONAL EXPERIENCE
April 2006 − November 2006
Project Manager

Indus Valley Construction & Consultants (Pvt) Limited Lahore.
Project Manager to manage the IVCC PROJECT, Excavation of Adit # 3 at
Diamer Basha Dam Site Chilas (Northern Areas of Pakistan) For WAPDA.

July 2004 − July 2005
Senior Engineer (Mining)

Saindak Metals Limited, Quetta MPNR, Govt. of Pakistan.
Monitoring of Copper Gold Project for technical operations regarding production of Copper Ore, copper concentrates & Blister copper.

March 2003 − July 2004
Manager (Geotech)

Ministry of Defense Govt. of Pakistan
I was responsible almost for the same as stated below under as Quarry Manager but for underground workings.

May 1994 − May 2000
Quarry Manager

M / S Mustekam Cement Ltd.
Haripur, Pakistan

I was head of Department, my major responsibilities are as under:
1. Management.
2. Planning for Development of Limestone Quarry and Clay Pits.
3. Planning for qualitative production of raw material i.e. Limestone & clay.
4. Managing Raw Materials supply right from Quarry face to the stack hall.
5. Operation of Crushing Plants.
6. Planning / managing for the repair & maintenance of Quarry Equipment's.
7. Budgeting.
8. Safety.
9. Labor Welfare.
10. Public Relations
11. Deal with Mining Related Govt. Department like Mining Lease matters, safety, Explosives etc.
12. To assist Senior Management to carry out special assignments.

January 1988 − April 1994
Deputy Manager
M / S Mustekam Cement Ltd.
Haripur, Pakistan

I was promoted as Deputy Manager Mining on January 1st. 1988. My Major responsibilities are as under:
1. 2−IC for Quarry Department.
2. To act as Head of Department in his absence.
3. Supervise Shift Engineers.
4. Coordination in between internal departments.
5. Preparation of budget, reports, presentations for seniors.
6. Managing supply of raw materials & crushers operation.
7. Plan and manage repair & maintenance of Quarry Equipment's.

June 1982 − December 1987
Assistant Manager (Mining)
M / S Mustekam Cement Ltd.
Haripur, Pakistan

This position was start of my career as Quarry Engineer. My Major Responsibilities are: −
1. To supervise shift operations like drilling, Blasting, Raw materials transportation, on site running repair of all quarry equipment's.
2. Preparation of internal / external reports required by company & Govt. Departments.
3. Prepare indents for purchase.
4. Explosive Magazine operations.
5. etc.

EDUCATION
December 1981
University of Engineering & Technology, Lahore, Pakistan

B.Sc. Engineering (Mining)
A Four years Degree programs for Mining Engineering. The major areas of study are:
1. Coal Mining. 2. Metal Mining.
3. Surface Mining. 4. Mine Machinery
5. Mine Ventilation. 6. Mine Safety
7. Rock Blasting 8. Mine Surveying
9. First Aid 10. Rock Mechanics
11. Thermodynamics. 12. Basic Electricity
13. Work shop. 14. Computer science
15. Mathematics. 16. Metallurgy.
17. Many more including
18. A Project on Development Scheme for limestone Quarry to award Degree.

September 1976
Govt. Collage of Science, Multan. Pakistan

F.Sc. (Pre−Engineering)
This is a Post Secondary School certificate program for Two years study at Collage and basic to enter Engineering University. The coarse is comprises of Physic, Chemistry, Mathematics, English, Urdu, and Islamiyat.

August 1974
Govt. High School, Shuja Abad, Distt: Multan, Pakistan

High school or equivalent, Secondary School Certificate
This Certificate was awarded on passing matriculation examination after completion of ten years basic education schooling in Science group.

SKILLS
Skill Level Years practiced Last used
Surface Mining Expert For All Expert More than 10 years More than 1 year
Operations Related To Quarry & Pit.

Management In Mining Project Expert More Than 10 Years More Than 1 Year

Rock Blasting Expert More Than 10 Years More Than 1 Year

Mineral Production Drilling Expert More Than 10 Years More Than 1 Year

Crushers Operations Expert More Than 10 Years More Than 1 Year

Raw Materials Transportation. Expert More than 10 years More than 1 year

LANGUAGES
English
Urdu

PROFESIONAL AFFILIATION:
1. Registered Professional Engineer, Pakistan Engineering Council, Islamabad. Under PEC Act. Govt. of Pakistan.
2. Member Institute of Mining Engineers Pakistan.
3. Member of Institute of Engineers Pakistan.
4. Ex-Member AIME, USA.

TRAININGS:
1. Apprentice Engineering (Coal Mining)
July 2nd 1978 to August 1st 1978.
One month pre-requisite practical training program for B.Sc. Degree.
Conducted at Makerwal Coal Collieries Limited, Makerwal, Distt: Main Wali Pakistan
2. Apprentice Engineering (Quarry)
July 2nd 1979 to July 31st 1979
One month pre-requisite practical training program for B.Sc.
Conducted at PUNJMIN Dolomite/ Gypsum Project, Pai Khail, Distt: Main Wali Pakistan
3. Institutional /On The Job Training.
July 7th to November 16th 1982.
An academic study in cement technology and on the job training for Plant and Quarry operations at various cement plants of SCCP.
4. Shot Firer Certiifcate
January 1st 1983 to January 8th 1983
Awarded by Inspectorate of Mines, Govt. of Punjab.
5. Modern Rock Blasting Techniques
March 29th, 1986 to April 4th 1986
Conducted by Nitro Nobel AB Sweden in collaboration with Wah Nobel Ltd Pakistan.
6. Skills In Supervision.
August 27th 1988 To September 1st 1988.
A Management Training program conducted by Pakistan Institute of Management, Lahore (Pakistan).
7. Mines Rescue & Recovery.
October 4th 1989 to October 25th 1989
Conducted at Mines Rescue Center Khushab (Pakistan) by Inspectorate of Mines, Ger. of Punjab.
8. Modern Rock Blasting Techniques.
April 24th 1995 to April 29th 1995.
Conducted by M/S Wah Nobel (Pvt.) Ltd. Wah Cant. (Pakistan)
9. First Aid To Injured Person.
No. of certificates awarded by St. John Ambulance of Pakistan & Red Crescent Society of Pakistan.

REFERENCE:
Available on request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 851 to 900 of 3492)

Go to Search Parameters...

Brief Description

Surface Mining Operator and Foreman

Senior underground narrow vein gold geologist with experience in exploration, resource definition and geophysics.

I am seeking a Well Site Geologist/Mudlogging position with a quality, client service oriented company. I have worked in Environmental Consulting and Mudlogging/Well Site Geology. My oilfield experience is in Utah, primarily in the Uintah Basin, and also in Colorado, New Mexico, Wyoming, and Texas.

I have been actively involved in the world of mapping for more than a decade and I take great pride in the art of mapping from start to finish. In every job that i oversee it is my goal to achieve the highest level of accuracy to provide the best possible data.

Industrial Maintenance Electrician 442A, Industrial Electrician, Instrumentation and Control Technician 447A, Instrument Mechanic, Electronic Technologist, Electrical Maintenance Technician

I am a mining engineer and I do work in South Africa for the past 11 years also I do have a MSc degree in mining engineering and more than 10 years experience in underground mining (gold and diamonds), and currently working for De Beers for the last 5 years

Melbourne, Australia Logistics Professional Have worked in many countries around the globe Extensive global knowledge of general freight movement, heavy lift and transportation requirements. Heavy shipping & barging, including barge landings.

Diamond Drilling Foreman(FSU)

Qualified Diesel Mechanic specializing in Hydraulics. I have 27 years experience in mining. A self starter who needs the minimum supervision.

35 years experience in contract mining in Pacific Rim Countries. General Manager of New Zealand's largest Contract miner.

i have a vast experience in mining industry of about 22 years. I have 3 years of abroad experience in Kenya and Uganda

Im presently building 2 land rigs for Arabian Drilling company, and have been employed by ADC for 7 years,as a senior chief mechanic. I am trying to get involved in a more technically advanced environment. I would be prepared to come and do a trail period on my days off.

27 yrs mining experience, 20 underground, 7 open pit experience in all phases of underground mining. operated haul pak and blast hole drills and front end loaders in pits.

I have over twenty five years experience in technical (mine surveying) discipline. I have worked in very busy offices and have experience in multitasking. I am friendly, punctual, honest, good at working with others, can work under pressure, hardworking and I have a professional manner.

Senior Executive with forty three years of experience in the mining industry

Resume

State Diploma of Geometer Studies in engineering State Doctorate of Political Sciences - Option " International "

As a fully qualified Mining Engineer i am looking to offer my skills to earth resource projects.

I am applying for overseas MINING appointments

A professionally qualified Engineer and Maintenance Specialist, with a total commitment to excellent performance, combining experience that encompasses a broad range of Mechanical and Electrical Engineering disciplines.

Extensive offshore experience within maintenance departments of large scale open pit mining operations.

I have 20+ years experience as a welder. I am certified in several welding procedures. I have done all-around general welding to custom fabrication. I am willing to relocate and/or travel.

11 plus years experience in managing granite quarries.

20+ years in EPC heavy/industrial. Sharpest skills in resource & time control. Expert Planner/Scheduler w/Primavera P3, P3e, Teamplay etc. software, 14 years experience (superuser & administrator). Capable Cost Engineer & Good communicator.

Positions attained include Maintenance Manager, Ore Flow General Superintendent, Mill Maintenance Superintendent, Mechanical General Supervisor, Planner Estimator, Machine Shop Foreman, Material Coordinator, Field Repair Foreman and Millwright.

I am willing to relocate for my employer, I am a mature energetic, safety oriented employee.

I am currently looking for a job in mining or heavy construction that will utilize my skills and productivity as a heavy equipment operator.

Mining Engineer and Geologist with twenty-seven years’ experience in precious and base metals, coal and industrial minerals. Professional Engineering licenses in three states, with unique construction and engineering achievements. Advanced technical and strong supervisory skills.

I have 21 years in Aust Army as Maint Planner/Supervisor with Diploma Engineering (Maint). Experienced trainer in Mincom Logistics computer systems. Willing to relocate nationally or internationally for the right position.

Over 25 years of exploration drilling and mining experience. Responsible for the coordination of drilling projects in both domestic and international environments.

Highly experienced purchasing and material management professional. Specialized experience in remote, severe climatic locations. Extensive experience in cross cultural work situations.

Seeking employment where my years of experience in surface & underground mining & construction, as well as my strong sales, contracting, consulting, and management skills can best be used

C/C++/ VB / SCADA / Electronic / Embedded / Automation / Systems Engineering

Associate Degree in Mechanical Engineering Draughting, 10 years Experience in various Mechanical and Plant Layout applications, using Inventor, Autocad, Pro Engineer, MSC Patran. Heavy Engineering Environment, International Earth Moving Machinery Manufacturing Company in South Africa.

Over 23 yrs of heavy earth field mechanic. AAS in Heavy equipment and diesel Technology. Lack final semester for BA in Training Industry & Business. CAT and Kamatsu trained.

Instrumentation technician with nine years experience in maintenence,repair,calibrating and installing of electrical,electronic and pnuematic equipment.

BSc Degree in Geological Engineering with 3 years experience in both exploration and mining. Good knowledge in Surpac and MapInfo with discover. I am a good team player with the ability to innovate and motivate.

master degree of earth science, no experience, very very motivated to start a geological career!!!

6 years undergound experience doing all jobs from moving supplies to drilling and blasting. Most of my experience is bolting with jackleg and stoper as I have been doing it for 5 years.

I have completed a 4yr bachelor of mining engineering at the University of Queensland, St Lucia campus. Through my vacation and graduate work I have worked as a drill and blast engineer, scheduling engineer and completed field experience as a haul truck operator and blast crew.

Ex-Pat experience in international Supply Chain, Logistics, Process, and Project Management

I had completed my graduation in Mining Engineering from University of Engineering & Technology Lahore (Pakistan) in December 1981. I started my career as Assistant Manager (Mining) in June, 1982 when my services were hired by State Cement Corporation of Pakistan.

Worked in a mining company as plant superintendent responsible for the overall operations.

Mechanical Engineering , Plant Maintenence, SAP R3 PM Module, Condition Monitoring, Operations and maintenance

10 years Heavy/Deisel Equipment Mechanic, Mining Experience, Shop Supervisor, Drill Maintenance

Perhaps you are looking for an experienced Security, Surveillance and Investigations Management professional, who is highly skilled in all aspects of highly sensitive investigations, corporate security, surveillance and asset protection?

Maintenance and technical background in mining as well as transport industries.

Multifaceted, proactive, and highly motivated professional seeks position within the mining, construction, transportation, or chemical process industry combining solid skills and diverse experience

Heavy Duty Mechanic Certificate -IP:K-06-14390 Inter-provincial Red Seal Certificate -23 years experience in the mining field -16 years experience as Heavy Duty Mechanic (underground and open pit)

Finance Professional with extensive experience in accounting, internal and external financial reporting, systems, business planning, operations analysis and international operations. Leadership experience in both corporate and operating unit environments, within the United States and Latin America.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 [ 18 ] 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out