Resume - Maintenance planning, projecting, implementation, monitoring, management, highly...

Misco Jobs

Resume #52367

CONTACT INFORMATION:
View contact information...

Qualifications for Management/Maintenance Expert

Summary

Over 25 years of progressive experience in Aviation maintenance and leadership, four of which were in CH53/CH46 helicopters with the US Marine Corps. Confidently manages maintenance and operations in a fast-paced environment. I am skilled and resourceful in problem resolution, customer relations, personnel management, maintenance, planning, execution of all assigned and self generated tasks along with facility upgrades and maintenance. Being highly experienced and competent in Mechanical/Electrical/Electronics/Pneumatics/Hydraulics/Sheetmetal, along with any combination of these systems or sub-systems.

Areas of Focused Experience

Operations Management * Project Management * Facility Management
Quality/Budget Control * Project Planning * Process Improvement
Team Building/Facilitation * Training/Development
Client-Customer Services * Research
Maintenance Dept. Leadership * Personnel Evaluations * Maintenance Tooling
* Dept. Operations * Maintenance Program Monitoring & Management
* New Aircraft Acquisition & Acceptance Team
* Equipment evaluation and purchase
* Risk Assessment and Department Safety Team member
Professional Highlights

* Saved Owens Corning $250K in maintenance costs by performing all maintenance work in-house.
* Reduced aircraft inspection time by 50%-75% by implementing purchase of a two-man articulating electric lift.
* Increased productivity at Cessna by cutting the time required to complete certain jobs by 50% through the fabrication of new tools and design of new procedures.
* Maintained a 99.5% dispatch rate for the Owens Corning flight department by ensuring the department was always at a state of readiness through constant analysis, adjustments, organization, and delegation of assignments.
* Brought to the attention of company executives "Citation Special Olympics Airlift": (using corporate aircraft to transport event athletes to the 2006 Games in Ames, Iowa.) One corporate aircraft now dedicated to support the "Citation Special Olympics Airlift" for 2006.
* Performed the duties of the DOM (Director of Maintenance) at Owens Corning during the last 6 months of 2005 and well into 2006 while current DOM oversaw additional temporary duties. Maintenance scheduling/planning, personnel issues, oversee budget, oversee parts requisitioning, tooling purchases/research, oversee minor and major inspections of Citation Sovereign (3), Hawker (2), and Falcon (1) aircraft in house along with outstation contract maintenance, maintained log books.

Employment Profile

Owens Corning Fiberglass, Assistant Director of Maintenance 1997-present
Manage the safe completion of all aircraft maintenance, ensuring compliance with industry and FAA standards. Troubleshoot system problems and performed necessary repairs. On a daily basis supervised six personnel in aircraft maintenance department. Interface with aircrews, office personnel, and the Director of Aviation Services. Serve as a mentor to junior co-workers. Work with clients and customers to ensure effective communication and satisfaction. ISBAO certification process, Lock/Tag/Try development for Aviation Department to align with corporate safety initiative. Point of contact with manufacture to resolve aircraft issues, parts failure descriptions, warranty claims, Cescom and CAMP record keeping, also contact for various vendors with equipment and furnishings items, hanger items as well.

F.R. Savage Landscaping LLC, President 1989-2006
Founded this small lawn care and landscape business from the ground up. Designed and installed customized landscapes for customers. Produced high-quality work on time and in budget, resulting in a 90% customer referral rate. Performed the design, sales, presentation, budget, ordered hard/soft landscape supplies, set up time frame to satisfactorily complete installation, ensured area was organized and cleaned each day, customer satisfaction upon completion so that all parties remained on good terms. Follow up call to complete the customer satisfaction process.

National Flight Services, Crew Chief/Inspector 1990-1996
Managed aircraft maintenance projects, including all scheduled and unscheduled maintenance, working with other departments to facilitate the timely completion of any and all maintenance projects. Worked with a four-member crew to complete all work on time, within budget, and according to manufacturers guidelines and FAA regulations. Inspected the work of other mechanics and signed off as required. Pre and post ran aircraft for troubleshooting, to set a reference for the post inspection run. Accompanied aircraft on post inspection test flight, upon return to repair facility, resolved any new or still outstanding "gripes" and other customer issues.

Cessna Citation, Assistant Crew Chief 1984-1990
Assisted with scheduled and unscheduled customer aircraft maintenance, including researching and ordering parts as well as customer relations. Ran aircraft before and after maintenance. Lead a team of four mechanics in the absence of the crew chief completing SB's, SL'S, AD's, inspection and warranty items as well as swqks. Was an on the road mechanic being sent to various locations to work customers aircraft either in their facility or at remote locations with minimal tooling and assistance.

Education & Training

B.S. in Aviation Management and B.S. in Aviation Maintenance Technology, Hamilton Univ.

Airframe and Powerplant License, Spartan School of Aeronautics

Continuous Education Training: Aircraft Systems Flight Safety Training Series: Flight Safety International; Cessna Citation Maintenance Training Series; Flight Dynamics: Heads Up Display Systems Training; Management classes within company and external.

Honorable Discharge U.S. Marine Corps

Airframe Experience:
CH46
CH53
Citation I
Citation II
Citation III
Citation SII
Citation Sovereign
Commander 680/690
Diamond
Falcon 50/900EX
Hawker 800
King Air 90/100/200/300/350
Merlin/Merlin Metro 226/227
MU2

APU:
GTCP 360
Hamilton Standard
RE 100 CS
Turbo mach
Sundstrand

Engine Experience:
GE T 64
JT 15
PT6
PW306C
TFE331/731

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 201 to 250 of 3444)

Go to Search Parameters...

Brief Description

I am a highly motivated, hardworking and versatile individual with a strong commitment to excellence in quality workmanship. I believe my experience, knowledge, dedication and willingness to handle and adapt to new challenges would prove to be most valuable to your company.

I have extensive experience in Cu/Mo/Au Concentrators working in the US and Chile in both technical and operations side of the business. My experience includes, conventional crushing and ball mill operations as well of SABC circuits.

I have had the opportunity to work either in extractive pyro or hydrometallurgy coupled with a strong background in computing . I am doing my best to be aware of all step made in metallurgy. I am honest, experienced leader and team builder. I accept also to relocate with my family.

Maintenance planning, projecting, implementation, monitoring, management, highly experienced in these areas.

Skilled mining enginner (blasting engineer) and of upto 12 to 13 years experiance

I have master degree in mining engineering and i have 10 years experience in mining engineering field such as open pit mining and underground.I worked in coal underground mines, marble,florin,copper andmanganeze mines.i was the member of American society of minning ,metalurgy and petrolium engineer

MC Driver and Chef

I am actively seeking a production management opportunity in a demanding, fast-paced multi-tasking environment, where I can provide critical management with a multitude of skills, and I would like to continue my growth with in your company.

20+ years exp. in survey and valuation, mines rescue services

I did my diploma in mining engineering from schools of mines , kolar gold fileds, board of technical examinations, karnataka, india. 30 years experience in underground field.

Electrical/Instrumentation. Design, supervise, commission and maintenance. 44 years experience. Tech Cert. T3, Nat.cert electrical N5, Prod. Mgr. Dipl. (4year). SAMTRAC,ITIS(Safety certificates, licence to train).etc.

Sr. Geologist / GIS Analyst / Mine Geologist / Structural Geologist

I am a serious minded individual seeking a new environment that has a challenging and rewarding future. I can offer you 29 years of experience in the mining industry (phosphate/open pit). I have obtained my experience from working the ground level up to management.

Millwright welding tickets

Over 20 years experience in both Supply and Project Logistics in both Oil and Gas as well as Mining. I also have direct Freight Forwarding experience including multi modal transport involving bulk, express, heavy haulage and over dimensional.

My underground mining experience begins from 1986. Over those years I was involved in all aspects of Underground mining. Beginning from manual labor, operating underground machineries, supervising crew, training new operators, to take role as Mine Foreman

Current position held: Project Exploration Geologist, Reefton Gold Project. Gold exploration 1993 - 1995, 2000 - present. Oil exploration 1996 - 1998

22 Years of experience in Granite and Minerals Industry. Project Head and Managerial cadre experience.

Strong technical and practical knowledge of mining and mineral processing. Over 20 year’s industry experience, in large and small mining operations, experiences in hard rock, sand and gravel, limestone, cement rock, and industrial minerals facilities. BS Mining Engineering.

An experienced daimond core drilling engineer seeks employment.24 years wide range experience in daimond, rotary and DTH drilling methods.Operation,maintanance and fishing,trouble shooting.Had overseas experience in Tanzania during 1995.

Coal Resource Geologist,Minescape software modelling skills,working in Coal field at Indonesia for past 2yrs,Having experience in various experience & skills Geological fields.

Excavator-grapple, mobile shear, excavation, demolition, scrap handling, stripping, quarry work

I have 32 years of millwright and supervisory experience with gyro and cone crushers,ball and sag mills up to 36 ft. Knelson concentrators, CIL leach systems, gold and copper systems, conveyors, screens, gold refining equipment.

10 years as maintenance manager, 10 years in africa. congo, mali. and guinea.

Working on Marion 8050 and 8200 draglines. Responsible for safe operations, following mine plans and maintenance of machines.

Thirty-One years of experiance in manufacturing

Senior drilling supervisor with 30+ years project experience in remote areas of the world.

I have been working in the mining industry for the past 30 years.

MEP Project Manager, Estimator, Procurement, Mechanical, Electrical, Civil, Plumbing

CFO & Treasurer - publicly traded oil & gas & mining company

I am a qualified Mechanical Design Draughtsman and a Fitter Turner Machinist. I have also completed the Management Development Programme through The University of Stellenbosch.

!$ years rich experience in coal mining both in underground and opencast, Experience in greenfield and brown field project

My name is Bruce Hutcheson and I recently worked as an Assistant Plant Manager at Luck Stone Corporation, located in the Northern Virginia area. As a dedicated manager for over 20 years, I am inquiring about a new opportunity to expand my career while inproving your client’s bottom line.

Diploma in High voltage switching-Maintenance Planner-Electrical maintenance

Material Handling Operation (Coal Handling System; Ash Handling System; Limestone System; Gypsum Area; Waste Handling Area; Fuel Oil System and Heavy Equipment), hard worker with 14 years hand on experiences in Power Plan Operation, commissioning, trouble shooting and root cause analysis.

25 years of professional experience in the Front-end and Detailed Design and Engineering, Projects Engineering, PMC, Factory & Site Acceptance Testing, Supervision of Installation, Testing and Commissioning of state-of-art DCS, SCADA, Safety Shutdown and F&G Systems and field instrumentation

Senior Mechanical Engineer (M.Sc.) having experience as plant manager and project manager, specialist in mining, safety glass, manufacturing plant and brewery investments.

Mining Engineer from with 24 years experience in underground as well as opencast mines. I have exposure in Lead-Zinc, Chromate Mines, Bauxite Mines and Limestone Mines. Presently, working as functional head of Limestone Mines captive to Cement plant.

18+ years automotive mechanics,11+years powder metal industry blending heatreat operations etc.

I have been working as an exploration geologist for 20+ years, field work to project management, Porphyry, Magmatic and Gold deposits in Canada

To Secure a position with an established organization, to utilize my knowledge and experience in the field of Heavy Duty Equipment.

I have a comprehensive understanding of a wide and varied range of vehicles, including HGV, PSV, Heavy Plant and Drilling Machinery. I am keen to use these multiple skills in a post which will prove challenging. In addition to my mechanical capabilities, I also have a good working knowledge of hydra

Career Maintenance Manager Mining

Diamond Drill Operator, surface drilling with the use of various types of machinery

28 years experience in ug/ hard rock and coal. Hard Rock: Alimak, Drift (rubber and rail), all types of stoping methods, and equipment operator of 1,1/4yd to 9yd loaders all brands, over shot rail muckers from 12b to 25 , jumbo drills single and double boom. Coal: Fletcher bolter and long wall

Marine engineer with all training necessary and green card

National Diploma in Chemistry and 28 Years experience in Laboratory work and management.

My field experience is 20 years in monitoring, planning and executing exploration programme for following minerals,1.coal, 2. iron-manganese, 3. tungstan, 4. diamond,5. lithium-rubidium-cesium, 6 copper. Leasing and liasoning work with govt. and private cos. Project manager-05 years exp.

Senior mechanical engineer with experience in engineering for material handling, industrial installations and conveying machines in steel industry, mining, cement & chemicals. Start-up assistance for steel industry.

reclamation and quarry

First 1 2 3 4 [ 5 ] 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out