Resume - I am very keen to work outdoors and have a great love of the West Australian out...

Misco Jobs

Resume #5273

CONTACT INFORMATION:
View contact information...

PERSONAL INFORMATION
I am a married 27 year old male. I am currently working as an Assistant Manager at Dick Smith Electronics at Morley. I have been working with this company since 1995. Over the years that I have been with this company I have developed a high level of interpersonal and management skills. My job requires to constantly expand my knowledge. I am extremely competent in the use of several different types of computer software, and am very quick to learn, due to my keen interest in this area.

I am very keen to work outdoors and have a great love of the West Australian outback. Therefore I am keen to work as a Haul Truck Driver and progress from there.

EDUCATION
Swan View Primary Years 1 to 7
Swan View Senior High School Years 1 to 12

CERTIFICATES AND QUALIFICATIONS
MARCSTA 2-28796 (Valid til 06/04/2004)
HR Class License (Valid til 21/04/2004)
Forklift Competency (Module ABG 571, Forlift Operations – Counter Balance, NOHSC:7019 (1992)
Restricted Private Pilots License

EMPLOYMENT
1995-2002 Assistant Manager
Dick Smith Electronics

I commenced working as a sales representative at Dick Smith Electronics in 1995. My previous computer skills became very advantageous in my being able to provide excellent customer satisfaction. My role was to remain on the store floor and assist customers with their purchases.

In 1998 I was promoted to Trainee Assistant Manager and began training at the Fremantle Store. My increased responsibility involved controlling of stock, stocktaking, rosters, paysheets, employee management, and formulating sales targets and strategies.

In 2002 I was promoted to Assistant Manager. My responsibilities involve managing of all staff in conjuction with the manager.

I am competent in solving hardware/software conflicts and peripheral problems. I am able to build and configure computers, and connect hardware. I have an extensive knowledge of software and computer programs.

1994 Sales Representative Belmont Computer Centre

I began with work experience which progressed to a full time job. This job involved the use of many computer systems, and assisting many companies and home users with computer difficulties.

1992-1995 Trolley Collector K-Tar Express

In the last two years my responsibility was increased and I began managing. This involved making sure workers arrived on time and all trolleys were accounted for at the end of the shift.

1990-1992 Casual Shop Hand Farmer Jacks Midland

Involved trolley collecting, cleaning, and controlling of stock.

INTERESTS
Computers, camping, 4-wheel driving, listening to music, and playing guitar.

References will be provided on request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1351 to 1400 of 3130)

Go to Search Parameters...

Brief Description

Process Engineer Graduated with a First Class from the University of Leeds 3-4 years experience of production, technical, commissioning and project management

Rigging Supervisor

Electrical fitter in a sugar mill where plc plays a important role in the factory

I am a young self motivated , result oriented geologist.

I'm graduated the Slavic University in 2005 y. Last 5 years and now I'm working for Kumtor Operating company (Cameko). Present position - control room's operator. Worked on grinding, flotation, CIL, strip, refinery, reagents areas.

I am having more than 16 years experience in secretarial field, out of which 8 years in U.A.E. only.

Mineral Processing Engineer(16 yrs exp.)10 yrs as mill sup't in Cu,Zn,Au,Ag operations. Personnal traits: team leader, flexible, resourceful, team-oriented, good communicator. Skills: technical & managerial aspects of planning, operation, projects, budget, processes, training, HSE

Marine 1.Engineer Officer Certicate, 8 years experience with mechanical maintenance and as a watchkeeping engineer in the engine control room

Stong knowledge of DRC market, procedures and culture. Good experience in Mining procedures in DRC.

I have completed my graduation with microbiology subject and also completed my laboratory technician course from government hospital.

I am a self motivated and ambitious Tanzanian holding a Bachelar of Science Degree in mining engineering who can work under pressure. I have got the basic skills in computer and user of Vulcan software.

I am very keen to work outdoors and have a great love of the West Australian outback. Therefore I am keen to work as a Haul Truck Driver and progress from there.

To be a part of organization which enables me to cope-up with emerging as well as the latest trends and provide me scope for widening the spectrum of my knowledge.

HEAT TREATMENT METALLURGY

Free! 6 years mining experiance and international mining experiance. i am looking to work overseas again. I have great pride in lasting out contracts to the end and am highly skilled

I have been working as a cook for many years now and I possess over 25 years of experiences in the domain. Just to give you a brief idea, I worked as a cook for over ten years in a bush camp with over 40 people to my charge (for treeplanters, hunting and fishing resort and for a Mining Exploration

Qualified Fitter and Turner / metal machinist

I have done just about every job in the mines.I have operated all types of Equipment and Have my assistant foreman card and have done some Section Foreman work also and have about a year of experience as a section foreman but it has mostly been filling in when the foreman was absent.

Survey technician

A mining engg from indian school of mines, currently I am working in NMDC an iron ore company, I am in charge of operation and safety aspects in the comapny,

Hardware systems engineer (Electrical Engineering, Hardware Design, Hardware/Software Testing, Hardware/Software Troubleshooting)

Experienced in running a safe, productive, team based work place and the use of maintenance planning and recording computer systems. Have knowledge and understanding in heavy equipment and shop maintenance. Excellent in heavy equipments electronic engine, hydraulic and electrical troubleshooting.

Civil Engineer with an experience of 15+ years in IT area, managing, supervising, consulting and delivering IT solutions for the Oil and Coal Industry. Knowledge and experience in strategic planning, project management, e-learning, and Process Reengineering. Good HR activities and knowledge

Coal miner with 11 years experience

2nd year of mining students.

One year and nine months of domestic mining experience, in a open cut, shovel/truck coal operation. Experience include, long term planning, road design, dump design, Pit design, scheduling, cost estimate, pit production supervisor of Shovel P&H and O&K fleet.

Mining Engineer, Programmer, Mineral Project Evaluation, CTL and GTL Technologies

Have a broad knowledge of maintenance practices and theory in addition to a Bachelor's degree in Industrial Management and a strong desire to work in the mining industry.

Commercial Manager (SCM/Accounts/Logistics/Inventory Control/Admin/Project Management), MBA with 5 plus Years Experiance of U/G Mechanised Mining (Continuous Miner) in India

Graduated in May 2004 with a Bachelor of Science in Electrical Engineering Technology. Objective is to obtain an entry-level engineering position.

Breakdown Quantity for Project Construction, Mining and Project Control specialist.

Diesel technican/mechanic/ Technical Trainer in Iraq/ all heavy duty trucks, trailers vehicles, engines etc/Supervising experience, Excellent organising and admin skills, excellent people skills

8 years of experience in Mill Wright Maintenance in heavy process industries Worked in Heavy Engineering Establishments. Experience in handling Breakdown and Preventive Maintenance Work of Machine Tools. Hydraulic and Pneumatic Problems.

GA class III wastewater license, 40HR HAZWOPER certified, excellent computer skills, Does have a valid US passport

Looking for offshore 28/28 rig welding job

Scaffold Inspection and Co-ordination

Arc, gas, glass(quartz) welding

Offshore Geological Specialist

Discovered 2 World Class & 2 Medium Size ore deposits - base and precious metals, gold, platinum, iron, open pit, under developed contries, Spanish, Portuguese, English, reg mining engineer & geologist USA & Brazil, Central & South America, Africa, Amazon, excellent Vice President, General Manager

I am very interested in seeking employment as a field Exploration Geologist. I have field experience including long hours in the jungle, desert and arctic that involved mapping, unit description, sample collection and claim staking. I speak Spanish.

Contract negotiations, contract drafting, contract analysis and legal risk management.

Supervisor - Mining

Mining/Mechanical Engineer with 5+ years experience, with a background in Environmental Engineering seeking employment.

Well qualified Geologist, with three years active experience in open cast mining and quarry operations, raw materials reserve exploration, estimation, mine and project planning, scheduling. Including also mobile plant allocations.

An Engineer with a wide range of experience in the Mining / Engineering industry. Able to work on own initiative and as part of a highly efficient team. Proven leadership skills involving managing, developing and motivating teams to achieve their objectives.

To work in a dynamic and innovative environment where challenges and Development is highly encouraged. To transform my acquired skills, education and experience to solving real life problems

Mining Engineer - Underground.

I am currently employed at Yenter Co., a regional drill and blast contractor. For two summers and one semester, I worked at North Antelope Rochelle Coal Complex in Gillette, WY as an engineering intern. I am proficient with AutoCAD, Vulcan, and several other softwares.

familiarity with gemcom, acquire, datamine, internet, ms office, first aid certification, bush operator training, surface mining common core, propane certification, class g driver's license

I am a qualified and Certified RED SEAL ELECTRICIAN / E&I Lead Hand with a broad background within the Petro-Chem industry both on and offshore. Experienced in leading teams, self-motivated with excellent communication skills,

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 [ 28 ] 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out