Resume - Expert in presplit blasting techniques. valid UAEand Oman Blasting License.Exper...

Misco Jobs

Resume #52900

CONTACT INFORMATION:
View contact information...

Experience:. An experience of more than 11 years working on limestone and Gabbro

Quarries and road projects with multinational companies' Expert in presplit blasting techniques. I have supervised nonel, electric and detonating cord blasting systems. I have worked with multinational companies on high productive quarries.

1 Working as a supervisor blasting with CCC on Salalah port project in Sultanate of Oman since October 2005.

Objectives

To produce eight million cubic meter of core and armour for Salalah port expansion project in 15 months. We are achieving our targets. We hope that we will finish the quarry activities in 13 months by achieving the targeted quantities.

2
Worked as senior Blasting engineer/supervisor from May 2002 to Aug 2005 with Stevin Rock L.L.C A leading ISO 9001 Certified company in U.A.E.
Objectives
* To develop the quarry to produce more than one million ton of quarry run per month.
* To produce 150000 tons of aggregate per week with in specifications of BS quality standards.
* To produce rock and armor
* To plan design and execution of the blast considering vibration and air over pressure limits.
* To develop and train the blasting team.
* To lead the production team.
Achievements.
* The Quarry was developed by18 months for targeted production of 280000 tons of quarry run per week.
* A target of 180000 tons per week sale of aggregate, rock and armor was achieved

* During blasting vibration never cross 4mm per second, (limit 40 mm per second)and air over pressure 104db.(limit 140db) even by using 10 tons of explosive per blast.
* Quarry roads designed by 1:10 slope.
* Quarry benches were 15 to 27m high.
* Developed good relations with police and civil defense departments.
* Developed an energetic quarry and production team.
* Drilling was done from 89mm to 200mm dia.

3. Working as mining engineer from 19th April, 1999 to 31st May 2002 withTurkish base Multinational "Bayindir Insaat" engaged on Islamabad ¡V Peshawar motorway Project.
Objectives
* To develop and run a limestone quarry for 180 km motorway project.
* To design plan and execute a rock road cut by presplit blasting techniques.
* To reduce blasting cost.
Achievements
„X A quarry was developed and supervised for daily production of 10000 tons crusher feed and 12000 tons for road filling material about 14 million tons in total.
„X A road cut of 280 m long and 72 m high done by presplit blasting techniques, with benches of 10 m height with 2:3 slopes leaving a berm of 5 m between benches.
. Both the above jobs completed 8 months before the schedule time.
„X I suggested and supervised a small mixing plant for explosive grade ammonium nitrate and fuel oil. Our explosive cost reduced by 40%.
„X An appreciation letter awarded to me by Pakistan army for safe blasting near their housing society.
„X Nonel system adopted for blasting.
. 4. Working at Ghazi Barotha dam project from March 1998 to April 1999 as a mining engineer with Dong Fong Electric Corporation, a China base multinational company.
Objectives and achievements.
* Supervised a lime stone quarry with daily production of 7000 tons of rock and armor.
* Supervised a sand and gravel quarry with daily production of 12000 tons.
* Presplit blasting for powerhouse area.

5. Working at motorway project M2 with Daewoo as blasting engineer from July 1995 to December 1997.Daewoo is a multinational Korean based company working in more than 20 countries of the world, engaged at Lahore ¡VIslamabad motorway.

Objectives and achievements.
* Supervised a lime stone quarry for feeding 400 tons and 300 tons per hour's crushers.
* Supervised a road cut by presplit blasting techniques with bench heights of 12 meters, a slope of 1:4 and 2:3.leaving a berm of 4 to 6 meters.
* Supervised the explosive magazine.
* Coordinating with inspectorates of mines for safety and health issues.
* Electric system used for blasting.
* Quarry roads made in 1:13 slope.
* Responsible for crusher aggregate quality.
* Responsible for supplying Quarry run for road filling with in specifications.
* To produce and supply rocks for riprap and gabion works.

Education: B.Sc. mining Engineering from U.E.T Lahore.
During My Studies Quarrying, Blasting, Tunneling and
Management Were few of the main courses out of 42 courses I covered

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 551 to 600 of 3130)

Go to Search Parameters...

Brief Description

Nine years experienced and motivated open cut production/planning engineer to secure a position in a mining company with considerable advancement opportunities

Mechanical Engineer: 12 years experience in project management & administration of highly complex industrial projects. Design, estimation, planning, scheduling, inspections and expediting. Team builder with outstanding results in conflict handling, excellent overall program leadership.

Senior Executive with Board Experience

Seior EE in oil and gas field and plants, construction and consulting, power generation and distribution, switchgear and motor control centers, training and development. I hold Masters degrees, completed all phd courses at McMaster University: Hamilton, ON. Canada. Accepted as P.Eng. by PEO, Canada

Geology & Mining Engineering Degrees; Underground and Surface Experience; Professional Geologist; Qualified Person after NI 43-101; Vulcan, Minesight, Gemcom Experience

Mines Manager with intensive experience of Underground Mining Operations of Semi Mechanized nature.

Maintenance Planner

20 years of construction and equipment operator and house and equipment repair

Expert in presplit blasting techniques. valid UAEand Oman Blasting License.Experince of 2500 BLASTS. Worked with multinational companies.

Dragline Operator with 23+ years in the Bowen Basin

Jounyman Heavy Equipment Mechanic

I have a National Higher Diploma in Extraction Metallurgy and currently studying towards a BSc Hons in Metallurgy at the University of Pretoria. My current tasks involve plant optimisation, risk assessments, health, safety and quality, budgetting, compilation and reviewing of work instructions.

Geological engineer (Portugal & UK), MSc in Mine Planning. Considerable experience in teaching and training, data analysis and field surveying. Work experience in various geological environments (Portugal & Africa). Strong IT skills. Fluent in Portuguese, English, Spanish and French.

Senior Chemical Integrity Engineer

To secure supply position-involving procurement, contracts and logistics coordination where my skills may be fully applied overseas, Africa or domestic assignments

Technical mining management professional with proven success in surface mine engineering, environmental and operations searching for a position in Operations or General Management.

Safety system and Advance Safety Auditing

I did B.Sc (Mathematics), Diploma In Mine Surveying, and Advances In Mine Surveying Technology (Indian School of Mines) . I am Using SURPAC Software From last 14 (Fourteen) Years in U/G Mine as well as in Open Pit Mine.

Feasibility studies, Process Design & Consultation, process Development , Project Management, Electro-mechanical installation, Pre-Commissioning & Commissioning, Start – up & Operation of Industrial Projects

I have 17 years of working experience on road construction and mining both hard rock and alluvial

Electronic/Diesel Hydraulic/Controls Technical Writier with field and military experiance.

19 yrs of hard rock mining experience (ie: copper, gold) as well as diamond mining. Will adapt to most enviroments and willing to work overseas; will reply to all responses. Sincerley Stu Hogg

A middle management level professional having an experience of 13 years (6 years of Gulf experience) in the avenue of QA/QC in Industrial Construction

Training and trade testing of apprentices

28 years exploration experiance in Africa. Two companies Anglo American & Union Carbide. Worked in remote locations, overseeing all personal and financial matters, budget control, oversaw logistics of exploation camps, responsible for safety, health and enviroment issues, conducted training.

To work for a great company as a driller or an advisor/trainer in the mining field or similar:(Exploration or other). My experience with and knowledge of drill bits may be of significant value to your company if many of your drill bits fail prematurely from broken or missing carbides.

Experienced and degree Safety Engineer. Wish to utilize experience and skills to reduce accidents, eliminate and control hazards, lower Workers Comp costs, and develop a Safe Production Program that contributes as a Profit Center.

Over 12 years of experience as research and mining engineer with experience in coalmine excavation, mine safety control, old mining area remediation, and rock mechanics. As a software engineer of AutoCAD, MDT, and GIS.

Free! Creation of geological block model and ore reserves estimation. Drill and blast design and creating blast hole data base. Development of long term plan and short term plan. Knowledge of Surpac Vision, Microsoft office, AutoCAD, CorelDraw, digitizing, plotting, scanning.

Drill Foreman/Camp Super

Mechanical Training Specialist of Heavy Equipment

Controls Eng. Tech.

Geophysical Supervisor, logistics, drill,survey, sample supervision.

•Excellent abilities on using PLC to control the machine,and I have held the certificate of Siemens Training Center.

Chartered Accountant

Geological modelling, Vulcan expert user, JORC reporting Project management Quality control, reconciliation RC/diamond/environ drilling, remote exploration Tenement applications Contract/tender documents, capital justifications Traditional Owner liaison Training indigenous people (military)

Underground and surface mine development, construction and operations. Mechanical engineering background, involved in maintenance and efficiency studies of mining equipment including excavation and haulage systems. Overseas experience.

Electrical Engineer with experience in system design and maintenance planning of electrical facilities including motors, motor starters, switchgears, power distribution, and cabling.

PhD candidate with experience in Hardrock and Softrock

13+ years experience in GIS Specialist, domestic and international

I am a Qualified Geological Technician with Underground, open pit and rock mechanics skills and GIS skills. Software skills in Mapinfo, Target, Xplorpac, Vulcan, Datashed

Post of OccupationalTherapist Assistant

I am an Electrical Engineer who has experiences in P&H and Bucyrus Electric Shovel

Mining and Construction Heavy Equipment Operator Trainer

20 years overseas contracting, Mining and Construction

Well Experienced Human Resources Professional in Recruitment, Salary Administration, Writing of Job Writing, Employee Relation, Employee Record Administration, Leave Record, and Settlement

Mining experience 20 yrs. Leader in all facets of underground mining,stope drift and timber leader. Jumbo jackleg stoper, heavy equipment truck to 40 ton tamroc jumbo, common core, Ontario mining certificate, various safty certificates, mine rescue certificate.

I am a Certified Safety Executive (CSE) and I’m an Associate Environmental Professional (AEP) with more than 13 plus years of experience in construction, industrial, mining, residential and service related industries

Experienced Cad Manager/Project Coordinator. Multi Discipline design teams. Proficient with 3d modelling using Autocad, ADT33, Autoplant, CadDuct and MultiSteel. Also experienced in using Microstation, PDMS, Prime Medusa and ProCadam. Engineering background - Structural/Civil.

DOCUMENT CONTROL MANAGER Successful, motivated, qualified with over 25 years extensive experience, covered all levels of data and admin management pro-active hands-on team member / leader. Experienced in all levels of computerised & manual document control.

First 1 2 3 4 5 6 7 8 9 10 11 [ 12 ] 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Mining;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out